| 1. |
- Khan, Asif, et al.
(författare)
-
Multivariate statistical analysis of heavy metals and physico-chemical parameters in the groundwater of Karak District, Khyber Pakhtunkhwa, Pakistan
- 2021
-
Ingår i: Proceedings of the Estonian Academy of Sciences. - : Estonian Academy Publishers. - 1736-6046 .- 1736-7530. ; 70:3, s. 297-306
-
Tidskriftsartikel (refereegranskat)abstract
- Groundwater heavy metal pollution is a major concern all around the world. For the assessment of heavy metals and physico-chemical characteristics. groundwater samples were collected from different locations of the Karak District, Pakistan. With the help of the global information system device (GIS), groundwater samples were collected and studied from 47 locations. The present study focused on the water table (WT), water source depth (WSD), pH, electrical conductivity (EC), dissolved oxygen (DO), total dissolved solids (TDS), lead (Pb(II)), silver (Ag(I)), iron (Fe(II)) and chromium (Cr(VI)) parameters. Heavy metals were analyzed by the Atomic Absorption Spectrophotometer (AAS). The Pearson's matrix of correlation showed relationships between several parameters, such as the EC and the TDS which had close interactions between all the three different groundwater samples (collected by hand pump (HP), bore holes (BH) and tube wells (TW)). The strong correlation was detected in all the sources of water between the TDS and the EC, the regression coefficient (r) of which was 1. In the hierarchical clustering (by dendrograms) the HP samples show two clusters: Cluster 1 contains seven parameters and Cluster 2 has four parameters. The BH samples have two clusters: Cluster 1 contains three parameters and Cluster 2 has eight parameters. The TW dendrogram also shows two clusters: Cluster 1 contains six parameters while Cluster 2 has five parameters.
|
|
| 2. |
- Bhatti, Adeel Liaquat, et al.
(författare)
-
An Efficient and Functional Fe3O4/Co3O4 Composite for Oxygen Evolution Reaction
- 2021
-
Ingår i: Journal of Nanoscience and Nanotechnology. - : AMER SCIENTIFIC PUBLISHERS. - 1533-4880 .- 1533-4899. ; 21:4, s. 2675-2680
-
Tidskriftsartikel (refereegranskat)abstract
- The design of efficient, stable, durable and noble metal free electro catalysts for oxygen evolution reaction (OER) are of immediate need, but very challenging task. In this study, iron induction into cobalt oxide (Co3O4) has resulted composite structure by wet chemical method. The iron impurity has brought an electronic disorder into Fe3O4/cobalt oxide composite thereby efficient oxygen evolution reaction is demonstrated. An addition of iron content into composite resulted the alternation of morphology from Nano rods to clusters of nanoparticles. The successive addition of iron into composite system reduced the onset potential of OER as compared to the pristine cobalt oxide. A Tafel slope of 80 mVdec(-1) indicates the favorable oxygen evolution reaction kinetics on the sample 4. An over-potential of 370 mV is required to reach a 10 mAcm(-2) current density which is acceptable for a nonprecious catalyst. The catalyst is highly durable and stable for 30 hours. Electrochemical impedance spectroscopy further provided a deeper insight on charge transfer resistance and sample 4 has low charge transfer resistance that supported the OER polarization curves. The sample 4 has more electrochemical active surface area of 393.5 cm(2). These obtained results are exciting and highlighting the importance of composite structure and leave a huge space for the future investigations on composite materials for energy related applications.
|
|
| 3. |
- Bhatti, Adeel Liaquat, et al.
(författare)
-
Facile doping of nickel into Co3O4 nanostructures to make them efficient for catalyzing the oxygen evolution reaction
- 2020
-
Ingår i: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 10:22, s. 12962-12969
-
Tidskriftsartikel (refereegranskat)abstract
- Designing a facile and low-cost methodology to fabricate earth-abundant catalysts is very much needed for a wide range of applications. Herein, a simple and straightforward approach was developed to tune the electronic properties of cobalt oxide nanostructures by doping them with nickel and then using them to catalyze the oxygen evolution reaction (OER) in an aqueous solution of 1.0 M KOH. The addition of a nickel impurity improved the conductivity of the cobalt oxide, and further increased its activity towards the OER. Analytical techniques such as scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and powder X-ray diffraction (XRD) were used to investigate, respectively, the morphology, composition and crystalline structure of the materials used. The nickel-doped cobalt oxide material showed randomly oriented nanowires and a high density of nanoparticles, exhibited the cubic phase, and contained cobalt, nickel and oxygen as its main elements. The nickel-doped cobalt oxide also yielded a Tafel slope of 82 mV dec(-1) and required an overpotential of 300 mV to reach a current density of 10 mA cm(-2). As an OER catalyst, it was shown to be durable for 40 h. Electrochemical impedance spectroscopy (EIS) analysis showed a low charge-transfer resistance of 177.5 ohms for the nickel-doped cobalt oxide, which provided a further example of its excellent OER performance. These results taken together indicated that nickel doping of cobalt oxide can be accomplished via a facile approach and that the product of this doping can be used for energy and environmental applications.
|
|
| 4. |
- Habiba, Umme, et al.
(författare)
-
Differential Treatment Responses in Pakistani Schizophrenia Samples: Correlation with Sociodemographic Parameters, Drug Addiction, Attitude to the Treatment and Antipsychotic Agents
- 2023
-
Ingår i: Brain Sciences. - : MDPI AG. - 2076-3425. ; 13:407, s. 1-25
-
Tidskriftsartikel (refereegranskat)abstract
- Schizophrenia patients demonstrate variations in response to different therapies that are currently being used for the treatment of disorders, such as augmentation therapy (ECT or mood stabilizer) and combination therapy (with antipsychotics). These therapies are also used to treat schizophrenia patients in Pakistan; however, patients show poor overall response. Therefore, this study was conducted to investigate the association between the patients’ response to treatment and the use of antipsychotic agents, with variability in overall response, within different groups of patients. Methods: We conducted a retrospective study that included schizophrenia subjects (N = 200) belonging to different age groups, ethnicities, and regions from different outpatient and inpatient departments in psychiatric institutes located in different cities of Pakistan. These patients were assessed for their response to treatment therapies and categorized into four groups (non-responders (N-R), slow response (S-R), patients with relapse, and completely recovered patients (C-R)) according to their responses. Results: The final analysis included 200 subjects, of which 73.5% were males. Mean age was 34 ± 10 years. Percentage of N-R was 5%, S-R was 42%, patients with relapse were 24%, and C-R was 1.5%. The generalized linear regression model shows a significant association between medication response and age (p = 0.0231), age of onset (p = 0.0086), gender (p = 0.005), and marital status (p = 0.00169). Variability within the medication responses was a result of the treatment regime followed. Antipsychotic agents were significantly associated with the treatment response (p = 0.00258, F = 4.981) of the patients. Significant variation was also observed in the treatment response (p = 0.00128) of the patients that were given augmentation therapy as well as combination therapy. Conclusion: The data suggests proper monitoring of patients’ behavior in response to treatment therapies to implement tailored interventions. Despite several genetic studies supporting the heritability of schizophrenia, an insignificant association between characteristic features and family history might have been due to the limited sample size, suggesting collaborative work with massive sample sizes.
|
|
| 5. |
- Aftab, Umair, et al.
(författare)
-
Mixed CoS2@Co3O4 composite material: An efficient nonprecious electrocatalyst for hydrogen evolution reaction
- 2020
-
Ingår i: International journal of hydrogen energy. - : PERGAMON-ELSEVIER SCIENCE LTD. - 0360-3199 .- 1879-3487. ; 45:27, s. 13805-13813
-
Tidskriftsartikel (refereegranskat)abstract
- Hydrogen evolution reaction (HER) has been identified as a sustainable and environment friendly technology for a wide range of energy conversion and storage applications. The big barrier in realizing this green technology requires a highly efficient, earth-abundant, and low-cost electrocatalyst for HER. Various HER catalysts have been designed and reported, still, their performance is not up to the mark of Pt. Among them, cobalt-based, especially cobalt disulfide (CoS2) has shown significant HER activity and found suitable candidature for HER due to its low cost, simple to prepare, and exhibits good stability. Herein, we synthesized various nanostructured materials including pure CoS2, Co3O4 and their composites by wet chemical methods and found them active for HER. The scanning electron microscopy (SEM) has revealed a morphology of composite as a mixture of nanowires and round shape spherical nanoparticles with several microns in dimension. The X-ray diffraction (XRD) confirmed the cubic phase of CoS2 and cubic phase of Co3O4 in the composite materials. The chemical deposition of CoS2 onto Co3O4 has tailored the HER activity of CoS2@Co3O4 composite material. Two CoS2@Co3O4 composite materials were produced with varying amounts of Co3O4 and labeled as samples 1 and 2. The Co3O4 reduced the adsorption energy for hydrogen, decreased the aggregation of CoS2 and uplifted the stability of CoS2@Co3O4 a composite material in alkaline media. Sample 1 requires an overpotential of 320 mV to reach a current density of 10 mA/cm(2) and it exhibits a Tafel slope of 42 mVdec(-1) which is the key indicator for the fast HER kinetics on sample 1. The sample 1 is highly durable for 50 h and also it has excellent stability. The electrochemical impedance spectroscopy (EIS) revealed a small charge transfer resistance of 28.81 Ohms for the sample 1 with high capacitance double-layer value of 0.81 mF. EIS has supported polarization and Tafel slope results. Based on the partial physical characterization and the electrochemical results, the as-obtained sample 1 (CoS2@Co3O4 composite material) will find potential applications in an extended range of energy conversion and storage devices owing to its low cost, high abundance, and excellent efficiency. (C) 2020 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
|
|
| 6. |
- Aftab, Umair, et al.
(författare)
-
Nickel-cobalt bimetallic sulfide NiCo(2)S(4)nanostructures for a robust hydrogen evolution reaction in acidic media
- 2020
-
Ingår i: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 10:37, s. 22196-22203
-
Tidskriftsartikel (refereegranskat)abstract
- There are many challenges associated with the fabrication of efficient, inexpensive, durable and very stable nonprecious metal catalysts for the hydrogen evolution reaction (HER). In this study, we have designed a facile strategy by tailoring the concentration of precursors to successfully obtain nickel-cobalt bimetallic sulfide (NiCo2S4) using a simple hydrothermal method. The morphology of the newly prepared NiCo(2)S(4)comprised a mixture of microparticles and nanorods, which were few microns in dimension. The crystallinity of the composite sample was found to be excellent with a cubic phase. The sample that contained a higher amount of cobalt compared to nickel and produced single-phase NiCo(2)S(4)exhibited considerably improved HER performance. The variation in the salt precursor concentration during the synthesis of a material is a simple methodology to produce a scalable platinum-free catalyst for HER. The advantageous features of the multiple active sites of cobalt in the CN-21 sample as compared to that for pristine CoS and NiS laid the foundation for the provision of abundant active edges for HER. The composite sample produced a current density of 10 mA cm(-2)at an overpotential of 345 mV. Also, it exhibited a Tafel value of 60 mV dec(-1), which predominantly ensured rapid charge transfer kinetics during HER. CN-21 was highly durable and stable for 30 hours. Electrochemical impedance spectroscopy showed that the charge transfer resistance was 21.88 ohms, which further validated the HER polarization curves and Tafel results. CN-21 exhibited a double layer capacitance of 4.69 mu F cm(-2)and a significant electrochemically active surface area of 134.0 cm(2), which again supported the robust efficiency for HER. The obtained results reveal that our developed NiCo(2)S(4)catalyst has a high density of active edges, and it is a non-noble metal catalyst for the hydrogen evolution reaction. The present findings provide an alternative strategy and an active nonprecious material for the development of energy-related applications.
|
|
| 7. |
- Aftab, Umair, et al.
(författare)
-
The chemically reduced CuO-Co3O4 composite as a highly efficient electrocatalyst for oxygen evolution reaction in alkaline media
- 2019
-
Ingår i: Catalysis Science & Technology. - : ROYAL SOC CHEMISTRY. - 2044-4753 .- 2044-4761. ; 9:22, s. 6274-6284
-
Tidskriftsartikel (refereegranskat)abstract
- The fabrication of efficient, alkaline-stable and nonprecious electrocatalysts for the oxygen evolution reaction is highly needed; however, it is a challenging task. Herein, we report a noble metal-free advanced catalyst, i.e. the chemically reduced mixed transition metal oxide CuO-Co3O4 composite, with outstanding oxygen evolution reaction activity in alkaline media. Sodium borohydride (NaBH4) was used as a reducing agent for the mixed transition metal oxide CuO-Co3O4. The chemically reduced composite carried mixed valence states of Cu and Co, which played a dynamic role in driving an excellent oxygen evolution reaction process. The X-ray photo-electron spectroscopy (XPS) study confirmed high density of active sites in the treated sample with a large number of oxygen vacancies. The developed electrocatalyst showed the lowest overpotential of 144.5 mV vs. the reversible hydrogen electrode (RHE) to achieve the current density of 40 mA cm(-2) and remained stable for 40 hours throughout the chronoamperometry test at the constant potential of 1.39 V vs. RHE. Moreover, the chemically reduced composite was highly durable. Electrochemical impedance spectroscopy (EIS) confirmed the low charge transfer resistance of 13.53 ohms for the chemically reduced composite, which was 50 and 26 times smaller than that of Co3O4 and untreated CuO-Co3O4, respectively. The electrochemically active surface area for the chemically reduced composite was found to be greater than that for pristine CuO, Co3O4 and untreated pristine CuO-Co3O4. These findings reveal the possibility of a new gateway for the capitalization of a chemically reduced sample into diverse energy storage and conversion systems such as lithium-ion batteries and supercapacitors.
|
|
| 8. |
- Aftab, Umair, et al.
(författare)
-
Two step synthesis of TiO2–Co3O4 composite for efficient oxygen evolution reaction
- 2021
-
Ingår i: International journal of hydrogen energy. - : Elsevier. - 0360-3199 .- 1879-3487. ; 46:13, s. 9110-9122
-
Tidskriftsartikel (refereegranskat)abstract
- For an active hydrogen gas generation through water dissociation, the sluggish oxygen evolution reaction (OER) kinetics due to large overpotential is a main hindrance. Herein, a simple approach is used to produce composite material based on TiO2/Co3O4 for efficient OER and overpotential is linearly reduced with increasing amount of TiO2. The scanning electron microscopy (SEM) and high resolution transmission electron microscopy (HRTEM) investigations reveal the wire like morphology of composite materials, formed by the self-assembly of nanoparticles. The titania nanoparticles were homogenously distributed on the larger Co3O4 nanoparticles. The powder x-ray diffraction revealed a tetragonal phase of TiO2 and the cubic phase of Co3O4 in the composite materials. Composite samples with increasing TiO2 content were obtained (18%, 33%, 41% and 65% wt.). Among the composites, cobalt oxide-titanium oxide with the highest TiO2 content (CT-20) possesses the lowest overpotential for OER with a Tafel slope of 60 mV dec−1 and an exchange current density of 2.98 × 10−3A/cm2. The CT-20 is highly durable for 45 h at different current densities of 10, 20 and 30 mA/cm2. Electrochemical impedance spectroscopy (EIS) confirmed the fast charge transport for the CT-20 sample, which potentially accelerated the OER kinetics. These results based on a two-step methodology for the synthesis of TiO2/Co3O4 material can be useful and interesting for various energy storage and energy conversion systems.
|
|
| 9. |
- Solangi, Muhammad Yameen, et al.
(författare)
-
In-situ growth of nonstoichiometric CrO0.87 and Co3O4 hybrid system for the enhanced electrocatalytic water splitting in alkaline media
- 2023
-
Ingår i: International journal of hydrogen energy. - : PERGAMON-ELSEVIER SCIENCE LTD. - 0360-3199 .- 1879-3487. ; 48:93, s. 36439-36451
-
Tidskriftsartikel (refereegranskat)abstract
- The development of electrocatalysts for electrochemical water splitting has received considerable attention in response to the growing demand for renewable energy sources and environmental concerns. In this study, a simple hydrothermal growth approach was developed for the in-situ growth of non-stoichiometric CrO0.87 and Co3O4 hybrid materials. It is apparent that the morphology of the prepared material shows a heterogeneous aggregate of irregularly shaped nanoparticles. Both CrO0.87 and Co3O4 have cubic crystal structures. Its chemical composition was governed by the presence of Co, Cr, and O as its main constituents. For understanding the role CrO0.87 plays in the half-cell oxygen evolu-tion reaction (OER) in alkaline conditions, CrO0.87 was optimized into Co3O4 nanostructures. The hybrid material with the highest concentration of CrO0.87 was found to be highly efficient at driving OER reactions at 255 mV and 20 mA cm(-2). The optimized material demonstrated excellent durability for 45 h and a Tafel slope of 56 mV dec(-1). Several factors may explain the outstanding performance of CrO0.87 and Co3O4 hybrid materials, including multiple metallic oxidation states, tailored surface properties, fast charge transport, and surface defects. An alternative method is proposed for the preparation of new generations of electrocatalysts for the conversion and storage of energy. (c) 2023 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
|
|
| 10. |
- Subhan, Sidra, et al.
(författare)
-
Ultra-fast and highly efficient catalytic oxidative desulfurization of dibenzothiophene at ambient temperature over low Mn loaded Co-Mo/Al2O3 and Ni-Mo/Al2O3 catalysts using NaClO as oxidant
- 2019
-
Ingår i: Fuel. - : Elsevier. - 0016-2361 .- 1873-7153. ; 237, s. 793-805
-
Tidskriftsartikel (refereegranskat)abstract
- This study reports the ultra-fast and highly efficient oxidative desulfurization (ODS) of dibenzothiophene (DBT) at room temperature over low Mn (0.5 wt%) incorporated Co-Mo/Al2O3 and Ni-Mo/Al(2)O(3 )catalysts using NaClO as oxidant. The effect of disparate operating parameters i.e. mode of catalyst preparation, DBT initial concentration, reaction time, temperature, catalyst and oxidant dose, oxidant type and reaction pH on oxidation process was investigated. Results revealed that remarkably high and ultra-fast A DBT conversion of 100% was achieved within 5 min utilizing 15 mL sample of 2000 ppm (347 ppm sulfur), 0.1 mL of 0.138 M NaClO (O/S6.6 mol/mol), 0.1 g Mn-Co-Mo/Al2O3 catalyst at pH 12, and 25 degrees C reaction temperature. A reaction mechanism for the highly efficient ODS activity of Mn promoted catalysts accredited to the synergistic effect of Mn active phase and high oxidizing power of NaClO was proposed. An overall ODS catalytic activity order of: Mn-Co-Mo/Al2O3 > Mn-Ni-Mo/Al2O3 > Co-Mo/Al2O3 > Ni-Mo/Al2O3 > Mo/Al2O3 was observed. Discernment of the surface morphology and textural properties of fresh and spent catalysts were characterized using Scanning electron microscopy (SEM), X-ray diffraction (XRD), Energy dispersive X-Ray (EDX), and BET surface area analysis which helped in evaluating the catalytic activity results. Due to ultra-fast and highly efficacious nature, simple and safe mechanization, cost effectiveness, and operation at ambient reaction conditions, this study can be envisaged as an effective approach for the ODS of fuel oils on industrial level.
|
|
