| 1. |
- Abelev, Betty, et al.
(författare)
-
Long-range angular correlations on the near and away side in p-Pb collisions at root S-NN=5.02 TeV
- 2013
-
Ingår i: Physics Letters. Section B: Nuclear, Elementary Particle and High-Energy Physics. - : Elsevier BV. - 0370-2693. ; 719:1-3, s. 29-41
-
Tidskriftsartikel (refereegranskat)abstract
- Angular correlations between charged trigger and associated particles are measured by the ALICE detector in p-Pb collisions at a nucleon-nucleon centre-of-mass energy of 5.02 TeV for transverse momentum ranges within 0.5 < P-T,P-assoc < P-T,P-trig < 4 GeV/c. The correlations are measured over two units of pseudorapidity and full azimuthal angle in different intervals of event multiplicity, and expressed as associated yield per trigger particle. Two long-range ridge-like structures, one on the near side and one on the away side, are observed when the per-trigger yield obtained in low-multiplicity events is subtracted from the one in high-multiplicity events. The excess on the near-side is qualitatively similar to that recently reported by the CMS Collaboration, while the excess on the away-side is reported for the first time. The two-ridge structure projected onto azimuthal angle is quantified with the second and third Fourier coefficients as well as by near-side and away-side yields and widths. The yields on the near side and on the away side are equal within the uncertainties for all studied event multiplicity and p(T) bins, and the widths show no significant evolution with event multiplicity or p(T). These findings suggest that the near-side ridge is accompanied by an essentially identical away-side ridge. (c) 2013 CERN. Published by Elsevier B.V. All rights reserved.
|
|
| 2. |
- Abelev, Betty, et al.
(författare)
-
Measurement of prompt J/psi and beauty hadron production cross sections at mid-rapidity in pp collisions at root s=7 TeV
- 2012
-
Ingår i: Journal of High Energy Physics. - 1029-8479. ; :11
-
Tidskriftsartikel (refereegranskat)abstract
- The ALICE experiment at the LHC has studied J/psi production at mid-rapidity in pp collisions at root s = 7 TeV through its electron pair decay on a data sample corresponding to an integrated luminosity L-int = 5.6 nb(-1). The fraction of J/psi from the decay of long-lived beauty hadrons was determined for J/psi candidates with transverse momentum p(t) > 1,3 GeV/c and rapidity vertical bar y vertical bar < 0.9. The cross section for prompt J/psi mesons, i.e. directly produced J/psi and prompt decays of heavier charmonium states such as the psi(2S) and chi(c) resonances, is sigma(prompt J/psi) (p(t) > 1.3 GeV/c, vertical bar y vertical bar < 0.9) = 8.3 +/- 0.8(stat.) +/- 1.1 (syst.)(-1.4)(+1.5) (syst. pol.) mu b. The cross section for the production of b-hadrons decaying to J/psi with p(t) > 1.3 GeV/c and vertical bar y vertical bar < 0.9 is a sigma(J/psi <- hB) (p(t) > 1.3 GeV/c, vertical bar y vertical bar < 0.9) = 1.46 +/- 0.38 (stat.)(-0.32)(+0.26) (syst.) mu b. The results are compared to QCD model predictions. The shape of the p(t) and y distributions of b-quarks predicted by perturbative QCD model calculations are used to extrapolate the measured cross section to derive the b (b) over bar pair total cross section and d sigma/dy at mid-rapidity.
|
|
| 3. |
- Abelev, Betty, et al.
(författare)
-
Underlying Event measurements in pp collisions at root s=0.9 and 7 TeV with the ALICE experiment at the LHC
- 2012
-
Ingår i: Journal of High Energy Physics. - 1029-8479. ; :7
-
Tidskriftsartikel (refereegranskat)abstract
- We present measurements of Underlying Event observables in pp collisions at root s = 0 : 9 and 7 TeV. The analysis is performed as a function of the highest charged-particle transverse momentum p(T),L-T in the event. Different regions are defined with respect to the azimuthal direction of the leading (highest transverse momentum) track: Toward, Transverse and Away. The Toward and Away regions collect the fragmentation products of the hardest partonic interaction. The Transverse region is expected to be most sensitive to the Underlying Event activity. The study is performed with charged particles above three different p(T) thresholds: 0.15, 0.5 and 1.0 GeV/c. In the Transverse region we observe an increase in the multiplicity of a factor 2-3 between the lower and higher collision energies, depending on the track p(T) threshold considered. Data are compared to PYTHIA 6.4, PYTHIA 8.1 and PHOJET. On average, all models considered underestimate the multiplicity and summed p(T) in the Transverse region by about 10-30%.
|
|
| 4. |
- Rodina, Tatyana A., et al.
(författare)
-
Crystalline O,O’-di-sec-butyl and O,O’-diethyl dithiophosphate platinum(II) complexes : Synthesis, 13C and 31P CP/MAS NMR, single crystal X-ray diffraction studies and thermal behaviour
- 2011
-
Ingår i: Polyhedron. - : Elsevier BV. - 0277-5387 .- 1873-3719. ; 30:13, s. 2210-2217
-
Tidskriftsartikel (refereegranskat)abstract
- Crystalline bis(O,O’-di-sec-butyldithiophosphato)platinum(II) was prepared and studied by means of 31P, 13C CP/MAS NMR spectroscopy and single-crystal X-ray diffraction. The unit cell of the platinum(II) compound is comprised of one centrosymmetric mononuclear molecule [Pt{S2P(O-sec-C4H9)2}2], in which the dithiophosphate groups display structural equivalence in both 31P NMR and XRD data. A pair of the dithiophosphate ligands exhibit the same S,S’-bidentate chelating structural function and form two planar four-membered chelate rings, [PtS2P], in this molecule. The planar configuration of the [PtS4] chromophore in structure 1 is governed by the dsp2-hybrid state of platinum(II). The structural states of the dithiophosphate groups in two different samples of complex 1 (one crystallised from ethanol and the other one precipitated from an aqueous solution) are all characterised by almost rhombic 31P chemical shift tensors. The observed essential dispersion of the 31P NMR chemical shift is caused by a coexistence of six optical isomers of molecule 1. The thermal behaviour of this compound was studied by means of simultaneous thermal analysis (a combination of TG and DSC) under an argon atmosphere. The thermal behaviour shows that the mass of 1 is lost in three steps, involving successive thermal decompositions of the organic and inorganic parts of this compound with platinum(II) dithio-meta-phosphate and reduced metallic platinum as the intermediate and the final products, respectively.
|
|
| 5. |
- Ivanov, Alexander, et al.
(författare)
-
A fixation mode of gold from solutions using heterogeneous reaction of cadmium dicyclohexyl dithiophosphate with H[AuCl4]. Structural and (13C, 31P) CP/MAS NMR studies and thermal behaviour of crystalline polymeric gold(I) dicyclohexyl dithiophosphate and bis(dicyclohexylthiophosphoryl) disulphide
- 2013
-
Ingår i: Journal of Molecular Structure. - : Elsevier BV. - 0022-2860 .- 1872-8014. ; 1034, s. 152-161
-
Tidskriftsartikel (refereegranskat)abstract
- Two novel compounds: polynuclear catena-poly[bis(3-O,O’-di-cyclo-hexyldithiophosphato-S,S,S’)digold(I)] (Au–Au) (1) and crystalline bis(O,O’-di-cyclo-hexylthiophosphoryl)disulphide, (cyclo-C6H11O)2P(S)S–S(S)P(O-cyclo-C6H11) (2) were prepared using heterogeneous reaction between freshly precipitated binuclear cadmium(II) dithiophosphate (Dtph), [Cd2{S2P(O-cyclo-C6H11}4] and H[AuCl4] in 2 M hydrochloric acid. The isolated compounds 1 and 2 (the fixation mode of gold from the solution and the oxidised form of Dtph groups, respectively) have been studied by means of single-crystal X-ray diffraction, 13C and 31P cross-polarisation / magic-angle-spinning (CP/MAS) NMR spectroscopy and simultaneous thermal analysis (STA). Centrosymmetric binuclear molecule of 1, [Au2{S2P(O-cyclo-C6H11)2}2] comprises a pair of -bridging di-cyclo-hexyl Dtph ligands, linking two neighbouring gold atoms, and displays additional intramolecular aurophilic bond Au···Au. At the supramolecular level of structural self-organisation of complex 1, infinite polymeric zigzag chains arise due to pairs of the secondary bonds Au···S between neighbouring binuclear molecules. Centrosymmetric molecule of 2 displays two O,O-di-cyclo-hexythiophosphoryl fragments, which are connected by the chemical bond S(1)–S(1)a, and a planar zigzag array [S=P–S–S–P=S] passing through the central part of the molecule. To characterise additionally the Dtph groups in both compounds 1 and 2, chemical shift anisotropy (CSA) parameters (aniso and) were calculated from spinning sideband manifolds in experimental 31P MAS NMR spectra. The thermal behaviour of complex 1 was studied using simultaneous thermal analysis (a combination of TG and DSC) under an argon atmosphere. The thermal behaviour displays stepwise mass loss, comprising thermal decompositions of the organic and inorganic parts of 1 with gold(I) dithio-meta-phosphate and reduced metallic gold as the intermediate and the final products, respectively.
|
|
| 6. |
|
|
| 7. |
|
|
| 8. |
- Lee, Chih Feng, et al.
(författare)
-
Active Brake Judder Compensation Using an Electro-Hydraulic Brake System
- 2015
-
Ingår i: SAE International Journal of Commercial Vehicles. - Warrendale : S A E Inc.. - 1946-391X .- 1946-3928. ; 8:1
-
Tidskriftsartikel (refereegranskat)abstract
- Geometric imperfections on brake rotor surface are well-known for causing periodic variations in brake torque during braking. This leads to brake judder, where vibrations are felt in the brake pedal, vehicle floor and/or steering wheel. Existing solutions to address judder often involve multiple phases of component design, extensive testing and improvement of manufacturing procedures, leading to the increase in development cost. To address this issue, active brake torque variation (BTV) compensation has been proposed for an electromechanical brake (EMB). The proposed compensator takes advantage of the EMB’s powerful actuator, reasonably rigid transmission unit and high bandwidth tracking performance in achieving judder reduction. In a similar vein, recent advancements in hydraulic system design and control have improved the performance of hydraulic brakes on a par with the EMB, therefore invoking the possibility of incorporating the BTV compensation feature of the EMB within hydraulic brake hardware. In this paper, the typical characteristics of electromechanical and electro-hydraulic brake systems are presented. Based on the experimental results, the feasibility of active BTV compensation on the electro-hydraulic brake (EHB) systems is discussed. Furthermore, a BTV compensation algorithm designed for the EMB is presented and is shown to be applicable to the EHB. Using an experimentally validated model of BTV, the compensation was performed on a hardware in-the-loop EHB test rig. The preliminary results demonstrate the potential of using an EHB to compensate for brake judder.
|
|
| 9. |
- Pastorelli, Giada, et al.
(författare)
-
Constraining the thermally pulsing asymptotic giant branch phase with resolved stellar populations in the Large Magellanic Cloud
- 2020
-
Ingår i: Monthly notices of the Royal Astronomical Society. - : Oxford University Press (OUP). - 0035-8711 .- 1365-2966. ; 498:3, s. 3283-3301
-
Tidskriftsartikel (refereegranskat)abstract
- Reliable models of the thermally pulsing asymptotic giant branch (TP-AGB) phase are of critical importance across astrophysics, including our interpretation of the spectral energy distribution of galaxies, cosmic dust production, and enrichment of the interstellar medium. With the aim of improving sets of stellar isochrones that include a detailed description of the TP-AGB phase, we extend our recent calibration of the AGB population in the Small Magellanic Cloud (SMC) to the more metal-rich Large Magellanic Cloud (LMC). We model the LMC stellar populations with the TRILEGAL code, using the spatially resolved star formation history derived from the VISTA survey. We characterize the efficiency of the third dredge-up by matching the star counts and the K-s-band luminosity functions of the AGB stars identified in the LMC. In line with previous findings, we confirm that, compared to the SMC, the third dredge-up in AGB stars of the LMC is somewhat less efficient, as a consequence of the higher metallicity. The predicted range of initial mass of C-rich stars is between M-i approximate to 1.7 and 3 M-circle dot at Z(i) = 0.008. We show how the inclusion of new opacity data in the carbon star spectra will improve the performance of our models. We discuss the predicted lifetimes, integrated luminosities, and mass-loss rate distributions of the calibrated models. The results of our calibration are included in updated stellar isochrones publicly available.
|
|
| 10. |
- Ricciardi, Vincenzo, et al.
(författare)
-
A Novel Semi-empirical Dynamic Brake Model for Automotive Applications
- 2020
-
Ingår i: Tribology International. - : Elsevier BV. - 0301-679X. ; 146
-
Tidskriftsartikel (refereegranskat)abstract
- In this work, the authors propose a semi-empirical dynamic brake model with the intent of improving the simulation fidelity of Model-, Software-, and Hardware-in-the-Loop environment in vehicle dynamics studies. This model has been parametrized and validated for three passenger cars’ brake systems composed of ECE linings and cast iron discs. The proposed model outperforms the State-of-the-Art by accounting for changes in the interfacial properties and thermal state at the brake pad-disc contact. This work is the result of a joint collaboration between Technische Universität Ilmenau (Ilmenau, Germany) and Volvo Cars (Gothenburg, Sweden). The results show that the braking time, disc temperature and local contact pressure play a fundamental role on the contact area dynamics and, hence, on the friction coefficient.
|
|
