| 1. |
- Bellman, Jakob, et al.
(författare)
-
Loading enhances glucose uptake in muscles, bones, and bone marrow of lower extremities in humans.
- 2024
-
Ingår i: The Journal of clinical endocrinology and metabolism. - 1945-7197.
-
Tidskriftsartikel (refereegranskat)abstract
- Increased standing time has been associated with improved health, but the underlying mechanism is unclear.We herein investigate if increased weight loading increases energy demand and thereby glucose uptake (GU) locally in bone and/or muscle in the lower extremities.In this single-center clinical trial with randomized crossover design (ClinicalTrials.gov ID, NCT05443620), we enrolled 10 men with body mass index (BMI) between 30 and 35kg/m2. Participants were treated with both high load (standing with weight vest weighing 11% of body weight) and no load (sitting) on the lower extremities. GU was measured using whole-body quantitative positron emission tomography/computed tomography (PET/CT) imaging. The primary endpoint was the change in GU ratio between loaded bones (i.e. femur and tibia) and non-loaded bones (i.e. humerus).High load increased the GU ratio between lower and upper extremities in cortical diaphyseal bone (e.g. femur/humerus ratio increased by 19%, p=0.029), muscles (e.g. m. quadriceps femoris/m. triceps brachii ratio increased by 28%, p=0.014) and in certain bone marrow regions (femur/humerus diaphyseal bone marrow region ratio increased by 17%, p=0.041). Unexpectedly, we observed the highest GU in the bone marrow region of vertebral bodies, but its GU was not affected by high load.Increased weight-bearing loading enhances GU in muscles, cortical bone, and bone marrow of the exposed lower extremities. This could be interpreted as increased local energy demand in bone and muscle caused by increased loading. The physiological importance of the increased local GU by static loading remains to be determined.
|
|
| 2. |
|
|
| 3. |
|
|
| 4. |
- Berg Jansson, Anna, et al.
(författare)
-
Professional Position Positioned: The Interwoven Experience of Being a Young Adult and New at Work Analysed from a Relational Perspective of Age
- 2024
-
Ingår i: Young - Nordic Journal of Youth Research. - : Sage Publications. - 1103-3088 .- 1741-3222. ; 32:2, s. 142-159
-
Tidskriftsartikel (refereegranskat)abstract
- To gain an in-depth understanding of the position of being a young adult and new at work simultaneously, this study examines the doing of age in relation to others in the lives of young adults, rather than focusing on age as a category and/or developmental phase. The study focuses on being a young adult from a critical and relational perspective of age. Based on focus group interviews with young adults, mostly women, working in retail, the aim is to analyse the position of being a young adult while new at work through age-marked relationships. The results reveal how this position can be understood both in terms of security and insecurity. Security arises in the sense of opportunities for learning and leaving responsibilities to older and more experienced colleagues. Insecurity arises in the sense of being exposed to insecure employment, the risk of being allocated less challenging tasks and being judged for failures.
|
|
| 5. |
- Blom, Tobias, et al.
(författare)
-
An In-Situ Prepared Nano-Manipulator Tip for Electrical Characterization of Free Standing Graphene Like Sheets Inside a Focused Ion Beam/Scanning Electron Microscope
- 2011
-
Ingår i: Journal of Nanoelectronics and Optoelectronics. - : American Scientific. - 1555-130X .- 1555-1318. ; 6:2, s. 162-168
-
Tidskriftsartikel (refereegranskat)abstract
- Although contacting and moving atoms has been demonstrated using probe techniques, for many nano-objects, a fast and reproducible nano-probe technique is needed to acquire a large number of electrical measurements on nano-objects that are often similar but not the identical. Nano-manipulators have become a common tool in many scanning electron microscopes (SEM) and focussed ion beam devices (FIB). They can be rapidly and reproducibly moved from one nano-object to another. In this work we present a procedure to obtain reproducible electrical measurements of nano- to micron-sized objects by using a sharp, tungsten tip with well defined surface properties. The tip is a part of a manipulator and is sharpened in-situ by using the gallium ion beam inside a focused ion beam/scanning electron microscope (FIB/SEM). The contact resistance between a Au surface and the tip is 70 kΩ before the sharpening procedure and 10 Ω after sharpening. The leakage current of the total set-up of 10pA makes it possible to measure currents through a variety of nano-objects. This measurement technique is applied to measure the resistance of as grown, water treated and two HCl treated carbon nanosheets (CNS). These CNS vary in size and morphology. Using this nano-contacting set-up, we could obtain measurements of more than 400 different CNS. The obtained histograms allow us to observe a clear decrease of the resistance between original and 3 hour acid treated CNSs. We observe that longer periods of exposure of the CNS to the HCl do not further modify the resistance.
|
|
| 6. |
- Bollati, Michela, et al.
(författare)
-
Structure and functionality in flavivirus NS-proteins : perspectives for drug design
- 2010
-
Ingår i: Antiviral Research. - : Elsevier BV. - 0166-3542 .- 1872-9096. ; 87:2, s. 125-148
-
Forskningsöversikt (refereegranskat)abstract
- Flaviviridae are small enveloped viruses hosting a positive-sense single-stranded RNA genome. Besides yellow fever virus, a landmark case in the history of virology, members of the Flavivirus genus, such as West Nile virus and dengue virus, are increasingly gaining attention due to their re-emergence and incidence in different areas of the world. Additional environmental and demographic considerations suggest that novel or known flaviviruses will continue to emerge in the future. Nevertheless, up to few years ago flaviviruses were considered low interest candidates for drug design. At the start of the European Union VIZIER Project, in 2004, just two crystal structures of protein domains from the flaviviral replication machinery were known. Such pioneering studies, however, indicated the flaviviral replication complex as a promising target for the development of antiviral compounds. Here we review structural and functional aspects emerging from the characterization of two main components (NS3 and NS5 proteins) of the flavivirus replication complex. Most of the reviewed results were achieved within the European Union VIZIER Project, and cover topics that span from viral genomics to structural biology and inhibition mechanisms. The ultimate aim of the reported approaches is to shed light on the design and development of antiviral drug leads.
|
|
| 7. |
|
|
| 8. |
- Erikshammar, Jarkko, et al.
(författare)
-
Industriellt träbyggande förenar ekonomi och byggbarhet
- 2010
-
Ingår i: Samhällsbyggaren. - 2000-2408. ; :2, s. 32-35
-
Tidskriftsartikel (populärvet., debatt m.m.)abstract
- Industrialized Timber Housing is based on repetition of the predefined building processes compared with traditional building where the business transaction and the customer are arranged into unique projects. Since the construction process consists of recurring activities, the industrial methods do not only improve the design and production phase, but the positive impact stretches well into the management phase. The market today can be offered cost-effective housing, with higher flexibility and better quality if the client, contractor and supplier takes control of the construction process.
|
|
| 9. |
- Fredin, Maria Fritsch, 1970, et al.
(författare)
-
Predicting and monitoring colitis development in mice by micro-computed tomography
- 2008
-
Ingår i: Inflammatory Bowel Diseases. - : Oxford University Press (OUP). - 1078-0998 .- 1536-4844. ; 14:4, s. 491-499
-
Tidskriftsartikel (refereegranskat)abstract
- BACKGROUND: Computed tomography (CT) has been developed as a tool for monitoring human inflammatory bowel disease (IBD). The aim of this study was to evaluate colon wall thickness as a noninvasive marker in the dextran sodium sulfate (DSS) mouse model of colitis using micro-CT. METHODS: Mice were examined by micro-CT 1, 2, or 4 times between day 0 (d0) and d26 after induction of colitis to document the kinetics of changes in colon wall thickness and its relation to colitis development. RESULTS: DSS-treated mice displayed a significantly thicker colon wall at all timepoints (days 5, 8, 12, 19, and 26) investigated compared to healthy controls. Colon wall thickness showed a good correlation to the macroscopic grading of colitis (r = 0.81). The increase in colon wall thickness occurred mainly during the acute phase of colitis (between days 5 and 12) and did not progress much further in the chronic phase of colitis (d26). Colon wall thickness at d26 was thereby predicted by measurements at d12. All mice did not respond equally to DSS and this difference was manifest during the first 2 weeks of colitis, providing an important tool in stratifying responders from nonresponders. CONCLUSIONS: While the potential impact of handling and anesthesia should be considered on repeated micro-CT, irradiation exposure during repeated micro-CT did not affect the development of colitis. Thus, the results suggest that micro-CT can be used for monitoring and prediction of the inflammatory response in mouse colitis in future therapeutic studies.
|
|
| 10. |
- Grennberg, Helena, et al.
(författare)
-
Functionalization and Area-Selective Deposition of Magnetic Carbon-Coated Iron Nanoparticles from Solution
- 2011
-
Ingår i: Journal of Nanotechnology. - : Hindawi publishing. - 1687-9503 .- 1687-9511. ; , s. 342368-
-
Tidskriftsartikel (refereegranskat)abstract
- A route to area-selective deposition of carbon-coated iron nanoparticles, involving chemical modification of the surface of the particles, is described. Partial oxidative etching of the coating introduces carboxylic groups, which then are esterified. The functionalized particles can be selectively deposited on the Si areas of Si/SiO2 substrates by a simple dipping procedure. Nanoparticles and nanoassemblies have been analyzed using SEM, TEM, and XPS.
|
|
