1. |
- Al-Adili, Ali, et al.
(författare)
-
Neutron-multiplicity experiments for enhanced fission modelling
- 2017
-
Ingår i: EPJ Web of Conferences. - : EDP Sciences. - 9782759890200
-
Konferensbidrag (refereegranskat)abstract
- The nuclear de-excitation process of fission fragments (FF) provides fundamental information for the understanding of nuclear fission and nuclear structure in neutron-rich isotopes. The variation of the prompt-neutron multiplicity, ν(A), as a function of the incident neutron energy (En) is one of many open questions. It leads to significantly different treatments in various fission models and implies that experimental data are analyzed based on contradicting assumptions. One critical question is whether the additional excitation energy (Eexc) is manifested through an increase of ν(A) for all fragments or for the heavy ones only. A systematic investigation of ν(A) as a function of En has been initiated. Correlations between prompt-fission neutrons and fission fragments are obtained by using liquid scintillators in conjunction with a Frisch-grid ionization chamber. The proof-of-principle has been achieved on the reaction 235U(nth,f) at the Van De Graff (VdG) accelerator of the JRC-Geel using a fully digital data acquisition system. Neutrons from 252Cf(sf) were measured separately to quantify the neutron-scattering component due to surrounding shielding material and to determine the intrinsic detector efficiency. Prelimenary results on ν(A) and spectrum in correlation with FF properties are presented.
|
|
2. |
- Al-Adili, Ali, et al.
(författare)
-
Prompt fission neutron yields in thermal fission of U-235 and spontaneous fission of Cf-252
- 2020
-
Ingår i: Physical Review C. - : American Physical Society (APS). - 2469-9985 .- 2469-9993. ; 102:6
-
Tidskriftsartikel (refereegranskat)abstract
- Background: The sharing of excitation energy between the fission fragments is one of the key issues in studying nuclear fission. One way to address this is by studying prompt-fission neutron multiplicities as a function of other fission observables such as the mass, (nu) over bar (A). These are vital benchmark data for both fission and nuclear deexcitation models, putting constrains on the fragment excitation energy and hence on the competing prompt neutron/gamma-ray emission. Despite numerous detailed studies, recent measurements done at JRC-Geel with the SCINTIA array in the epithermal region show surprisingly strong discrepancies to earlier thermal fission data and the Wahl systematics. Purpose: The purpose was to perform measurements of the prompt-fission neutron multiplicity, as a function of fragment mass and total kinetic energy (TKE), in U-235(n(th), f) and Cf-252(sf), to verify and extend the SCINTIA results. Another goal was to validate the analysis methods, and prepare for planned investigations at excitation energies up to 5.5 MeV. Methods: The experiments were conducted at the former 7 MV Van de Graaff facility in JRC-Geel, using a Twin Frisch-Grid Ionization Chamber and two liquid scintillation detectors. A neutron beam with an average energy of 0.5 MeV was produced via the Li-7(p,n) reaction. The neutrons were thermalized by a 12 cm thick block of paraffin. Digital data acquisition systems were utilized. Comprehensive simulations were performed to verify the methodology and to investigate the role of the mass and energy resolution on measured (nu) over bar (A) and (nu) over bar (TKE) values. The simulation results also revealed that the partial derivative(nu) over bar/partial derivative A and partial derivative(TKE) over bar/partial derivative(nu) over bar are affected by the mass and energy resolution. However, the effect is small for the estimated resolutions of this work. Detailed Fluka simulations were performed to calculate the fraction of thermal neutron-induced fission, which was estimated to be about 98%. Results: The experimental results on (nu) over bar (A) are in good agreement with earlier data for Cf-252(sf). For U-235(n(th), f), the (nu) over bar (A) data is very similar to the data obtained with SCINTIA, and therefore we verify these disclosed discrepancies to earlier thermal data and to the Wahl evaluation. The experimental results on (nu) over bar (TKE) are also in agreement with the data at epithermal energies. For Cf-252(sf) a slope value of partial derivative(TKE) over bar/partial derivative(nu) over bar = (-12.9 f 0.2) MeV/n was obtained. For U-235(n(th), f) the value is (-12.0 +/- 0.1) MeV/n. Finally, the neutron spectrum in the center-of-mass system was derived and plotted as a function of fragment mass. Conclusions: This work clearly proves the lack of accurate correlation between fission fragment and neutron data even in the best-studied reactions. The new results highlight the need of a new evaluation of the prompt-fission multiplicity for U-225(n(th), f).
|
|
3. |
- Al-Adili, Ali, et al.
(författare)
-
Studying fission neutrons with 2E-2v and 2E
- 2018
-
Ingår i: SCIENTIFIC WORKSHOP ON NUCLEAR FISSION DYNAMICS AND THE EMISSION OF PROMPT NEUTRONS AND GAMMA RAYS (THEORY-4). - : EDP Sciences. - 9782759890316
-
Konferensbidrag (refereegranskat)abstract
- This work aims at measuring prompt-fission neutrons at different excitation energies of the nucleus. Two independent techniques, the 2E-2v and the 2E techniques, are used to map the characteristics of the mass-dependent prompt fission neutron multiplicity, 7(A), when the excitation energy is increased. The VERDI 2E-2v spectrometer is being developed at JRC-GEEL. The Fission Fragment (FF) energies are measured using two arrays of 16 silicon (Si) detectors each. The FFs velocities are obtained by time-of-flight, measured between micro-channel plates (MCP) and Si detectors. With MCPs placed on both sides of the fission source, VERDI allows for independent timing measurements for both fragments. Cf-252(sf) was measured and the present results revealed particular features of the 2E-2v technique. Dedicated simulations were also performed using the GEF code to study important aspects of the 2E-2v technique. Our simulations show that prompt neutron emission has a non-negligible impact on the deduced fragment data and affects also the shape of 17(A). Geometrical constraints lead to a total-kinetic energy-dependent detection efficiency. The 2E technique utilizes an ionization chamber together with two liquid scintillator detectors. Two measurements have been performed, one of Cf-252(sf) and another one of thermal-neutron induced fission in U-235(n,f). Results from Cf-252(sf) are reported here.
|
|
4. |
- Hambsch, F. -J, et al.
(författare)
-
Prompt Neutron Emission Correlations with Fission Fragment Properties
- 2018
-
Ingår i: Fission And Properties Of Neutron-Rich Nuclei. - : World Scientific. - 9789813229433 ; , s. 503-512
-
Konferensbidrag (refereegranskat)abstract
- The investigation of the dynamics of the nuclear fission process has been a standing research topic at the JRC-Geel during the past decades. Recently the focus was put on the de-excitation of fission fragments through the emission of prompt neutrons and gamma-rays. To this end new detector systems were developed at JRC-Geel, e.g. a position sensitive ionization chamber used in conjunction with the neutron scintillator array SCINTIA. The array has been tested using the spontaneous fission of Cf-252. The goal is to study correlations of fission fragments with prompt neutron emission in the resolved resonance region. No strong fluctuations of the average prompt neutron multiplicity for the strongest resonances in U-235 were observed. From the present data the mass-dependent neutron multiplicity, v(A), was generated. The v(A) distribution shows a more pronounced dip around the doubly magic mass A = 132 and at very low masses around A similar to 80 compared to the literature. In addition, a steeper slope for v(TKE) is observed. Cross checking with fragment data clearly shows a narrower mass and total kinetic energy (TKE) distribution. The 2E-2v spectrometer VERDI (VElocity foR Direct mass Identification) became operational. For Cf-252(sf) superior mass resolution is observed compared to a twin Frisch-grid ionization chamber. For post-neutron mass distributions still some issues need to be solved and v(A), being the difference of pre- and post-neutron mass distributions, is still deviating from literature data. Eventually, VERDI will provide a complementary measurement technique to assess v(A) and v(TKE). In addition, an experimental campaign to measure v(A) as a function of incident neutron energy for different actinides has been started. First tests show promising results.
|
|
5. |
- Jansson, Kaj, 1987-, et al.
(författare)
-
Measurement of the 6Li(n,α)t neutron standard cross-section at the GELINA facility
- 2017
-
Ingår i: ND 2016. - Les Ulis : EDP Sciences. - 9782759890200
-
Konferensbidrag (refereegranskat)abstract
- The Li-6(n,alpha)t reaction cross-section is an established standard due to its relatively high crosssection as well as its high Q-value. However, it is only considered a neutron standard up to 1 MeV, because in the neutron energy region 1-3 MeV there exist discrepancies of several per cents between recent measurements [1,2] and evaluated data files [3]. It has been speculated [4] that neglecting of the particle leaking effect might be part of the explanation why there is a disagreement in this region. Based on R-matrix calculations, in the region around 2 MeV, one also expects three excitation levels of Li-7 to significantly influence the cross section [5]. In order to resolve these discrepancies, we perform measurements at the GELINA facility at JRC-Geel with two Frisch-gridded ionisation chambers. The Li-6(n,alpha)t cross section is measured relative to the U-235(n,f) standard. In order to solve previous encountered problems [6], the setup has been modified and moved to a new flight path station. In this proceeding we show that several problems have been eliminated and discuss possible solutions to newly arisen problems, due to the changed experimental conditions. Preliminary results from new data taken during 2016 with the updated setup are presented.
|
|
6. |
- Jansson, Kaj, 1987-
(författare)
-
Measurements of Neutron-induced Nuclear Reactions for More Precise Standard Cross Sections and Correlated Fission Properties
- 2017
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- It is difficult to underestimate the importance of neutron cross section standards in the nuclear data field. Accurate and precise standards are prerequisites for measuring neutron cross sections. Two different projects are presented here with the aim of improving on neutron standards.A simulation study was performed for an experiment intended to measure the cross sections of H(n,n), 235U(n,f), and 238U(n,f) relative to each other. It gave the first estimates of the performance of the experimental setup. Its results have aided the development of the experimental setup by setting limits on the target and detector design.A second neutron-standard project resulted in three measurements of 6Li(n,α)t relative to 235U(n,f). Each subsequent measurement improved upon the previous one and changed the experimental setup accordingly. Although, preliminary cross sections were agreeing well with evaluated data files in some energy intervals, the main goal to measure the cross section up to 3 MeV was not reached.Mass yields and energy spectra are important outcomes of many fission experiments, but in low yield regions the uncertainties are still high even for recurrently studied nuclei. In order to understand the fission dynamics, one also needs correlated fission data. One particular important property is the distribution of excitation energy between the two nascent fission fragments. It is closely connected to the prompt emission of neutrons and γ’s and reveals information about how nucleons and energy are transferred within the fissioning nucleus.By measuring both the pre and post neutron-emission fragment masses, the cumbrance of detecting neutrons directly is overcome. This is done using the fission spectrometer VERDI and the 2E-2v method. In this work I describe how both the spectrometer, the analysis method, and the calibration procedures have been further developed. Preliminary experimental data show the great potential of VERDI, but also areas that call for more attention. A previously overlooked consequence of a central assumption was found and a correction method is proposed that can correct previously obtained data as well.The last part of this thesis concerns the efficiencies of the fission product extraction at the IGISOL facility. The methodology of the fission yield measurements at IGISOL are reliant on assumptions that have not been systematically investigated. The presented work is a first step of such an investigation that can also be used as a tool for optimising the setup for measurements of exotic nuclei. A simulation framework connecting three different simulation codes was developed to investigate the produced yield of fission products in a buffer gas. Several different variants of the setup were simulated and the findings were generally accordant with previous estimates. A reasonable agreement between experimental data and the simulation results is demonstrated.
|
|
7. |
- Jansson, Kaj, 1987-, et al.
(författare)
-
Simulated production rates of exotic nuclei from the ion guide for neutron-induced fission at IGISOL
- 2017
-
Ingår i: European Physical Journal A. - : Springer. - 1434-6001 .- 1434-601X. ; 53:12
-
Tidskriftsartikel (refereegranskat)abstract
- An investigation of the stopping efficiency of fission products, in the new ion guide designed for ion production through neutron-induced fission at IGISOL in Jyväskylä, Finland, has been conducted. Our simulations take into account the new neutron converter, enabling measurements of neutron-induced fission yields, and thereby provide estimates of the obtained yields as a function of primary proton beam current. Different geometries, targets, and pressures, as well as models for the effective charge of the stopped ions were tested, and optimisations to the setup for higher yields are suggested. The predicted number of ions stopped in the gas lets us estimate the survival probability of the ions reaching the downstream measurements stations.
|
|
8. |
- Jansson, Kaj, 1987-, et al.
(författare)
-
The impact of neutron emission on correlated fission data from the 2E-2v method
- 2018
-
Ingår i: European Physical Journal A. - : Springer Science and Business Media LLC. - 1434-6001 .- 1434-601X. ; 54
-
Tidskriftsartikel (refereegranskat)abstract
- The double-energy double-velocity (2E-2v) method allows assessing fission-fragment mass yields prior to and after prompt neutron emission with high resolution. It is, therefore, considered as a complementary technique to assess average prompt neutron multiplicity as a function of fragment properties. We have studied the intrinsic features of the 2E-2v method by means of event-wise generated fission-fragment data and found short-comings in the method itself as well as in some common practices of application. We find that the 2E-2v method leads to large deviations in the correlation between the prompt neutron multiplicity and pre-neutron mass, which deforms and exaggerates the so-called “sawtooth” shape of nubar(A). We have identified the treatment of prompt neutron emission from the fragments as the origin of the problem. The intrinsic nature of this deficiency risks to render 2E-2v experiments less interesting. We suggest a method to correct 2E-2v data that can even be applied on existing measurements.
|
|
9. |
- Jansson, Kaj, 1987-, et al.
(författare)
-
The new double energy-velocity spectrometer VERDI
- 2017
-
Ingår i: ND 2016: INTERNATIONAL CONFERENCE ON NUCLEAR DATA FOR SCIENCE AND TECHNOLOGY. - Les Ulis : EDP Sciences. - 9782759890200
-
Konferensbidrag (refereegranskat)abstract
- VERDI (VElocity foR Direct particle Identification) is a fission-fragment spectrometer recently put into operation at JRC-Geel. It allows measuring the kinetic energy and velocity of both fission fragments simultaneously. The velocity provides information about the pre-neutron mass of each fission fragment when isotropic prompt-neutron emission from the fragments is assumed. The kinetic energy, in combination with the velocity, provides the post-neutron mass. From the difference between pre- and post-neutron masses, the number of neutrons emitted by each fragment can be determined. Multiplicity as a function of fragment mass and total kinetic energy is one important ingredient, essential for understanding the sharing of excitation energy between fission fragments at scission, and may be used to benchmark nuclear de-excitation models. The VERDI spectrometer design is a compromise between geometrical efficiency and mass resolution. The spectrometer consists of an electron detector located close to the target and two arrays of silicon detectors, each located 50 cm away from the target. In the present configuration pre-neutron and post-neutron mass distributions are in good agreement with reference data were obtained. Our latest measurements performed with spontaneously fissioning 252Cf is presented along with the developed calibration procedure to obtain pulse height defect and plasma delay time corrections.
|
|
10. |
- Jansson, Kaj, 1987-, et al.
(författare)
-
Two level scheme solvers for nuclear spectroscopy
- 2011
-
Ingår i: Nuclear Instruments & Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors, and Associated Equipment. - : Elsevier BV. - 0167-5087 .- 0168-9002 .- 1872-9576. ; 654:1, s. 496-501
-
Tidskriftsartikel (refereegranskat)abstract
- A program for building level schemes from gamma-spectroscopy coincidence data has been developed. The scheme builder was equipped with two different algorithms: a statistical one based on the Metropolis method and a more logical one, called REMP (REcurse, Merge and Permute), developed from scratch. These two methods are compared both on ideal cases and on experimental gamma-ray data sets. The REMP algorithm is based on coincidences and transition energies. Using correct and complete coincidence data, it has solved approximately half a million schemes without failures. Also, for incomplete data and data with minor errors, the algorithm produces consistent sub-schemes when it is not possible to obtain a complete scheme from the provided data. (C) 2011 Elsevier B.V. All rights reserved.
|
|