| 1. |
- Labit, B., et al.
(författare)
-
Dependence on plasma shape and plasma fueling for small edge-localized mode regimes in TCV and ASDEX Upgrade
- 2019
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 59:8
-
Tidskriftsartikel (refereegranskat)abstract
- © 2019 Institute of Physics Publishing. All rights reserved. Within the EUROfusion MST1 work package, a series of experiments has been conducted on AUG and TCV devices to disentangle the role of plasma fueling and plasma shape for the onset of small ELM regimes. On both devices, small ELM regimes with high confinement are achieved if and only if two conditions are fulfilled at the same time. Firstly, the plasma density at the separatrix must be large enough (ne,sep/nG ∼ 0.3), leading to a pressure profile flattening at the separatrix, which stabilizes type-I ELMs. Secondly, the magnetic configuration has to be close to a double null (DN), leading to a reduction of the magnetic shear in the extreme vicinity of the separatrix. As a consequence, its stabilizing effect on ballooning modes is weakened.
|
|
| 2. |
- Meyer, H., et al.
(författare)
-
Overview of progress in European medium sized tokamaks towards an integrated plasma-edge/wall solution
- 2017
-
Ingår i: Nuclear Fusion. - : Institute of Physics Publishing (IOPP). - 0029-5515 .- 1741-4326. ; 57:10
-
Tidskriftsartikel (refereegranskat)abstract
- Integrating the plasma core performance with an edge and scrape-off layer (SOL) that leads to tolerable heat and particle loads on the wall is a major challenge. The new European medium size tokamak task force (EU-MST) coordinates research on ASDEX Upgrade (AUG), MAST and TCV. This multi-machine approach within EU-MST, covering a wide parameter range, is instrumental to progress in the field, as ITER and DEMO core/pedestal and SOL parameters are not achievable simultaneously in present day devices. A two prong approach is adopted. On the one hand, scenarios with tolerable transient heat and particle loads, including active edge localised mode (ELM) control are developed. On the other hand, divertor solutions including advanced magnetic configurations are studied. Considerable progress has been made on both approaches, in particular in the fields of: ELM control with resonant magnetic perturbations (RMP), small ELM regimes, detachment onset and control, as well as filamentary scrape-off-layer transport. For example full ELM suppression has now been achieved on AUG at low collisionality with n = 2 RMP maintaining good confinement H-H(98,H-y2) approximate to 0.95. Advances have been made with respect to detachment onset and control. Studies in advanced divertor configurations (Snowflake, Super-X and X-point target divertor) shed new light on SOL physics. Cross field filamentary transport has been characterised in a wide parameter regime on AUG, MAST and TCV progressing the theoretical and experimental understanding crucial for predicting first wall loads in ITER and DEMO. Conditions in the SOL also play a crucial role for ELM stability and access to small ELM regimes.
|
|
| 3. |
- Meyer, H., et al.
(författare)
-
Overview of progress in European medium sized tokamaks towards an integrated plasma-edge/wall solution
- 2017
-
Ingår i: Nuclear Fusion. - : Institute of Physics Publishing (IOPP). - 0029-5515 .- 1741-4326. ; 57:10
-
Tidskriftsartikel (refereegranskat)abstract
- Integrating the plasma core performance with an edge and scrape-off layer (SOL) that leads to tolerable heat and particle loads on the wall is a major challenge. The new European medium size tokamak task force (EU-MST) coordinates research on ASDEX Upgrade (AUG), MAST and TCV. This multi-machine approach within EU-MST, covering a wide parameter range, is instrumental to progress in the field, as ITER and DEMO core/pedestal and SOL parameters are not achievable simultaneously in present day devices. A two prong approach is adopted. On the one hand, scenarios with tolerable transient heat and particle loads, including active edge localised mode (ELM) control are developed. On the other hand, divertor solutions including advanced magnetic configurations are studied. Considerable progress has been made on both approaches, in particular in the fields of: ELM control with resonant magnetic perturbations (RMP), small ELM regimes, detachment onset and control, as well as filamentary scrape-off-layer transport. For example full ELM suppression has now been achieved on AUG at low collisionality with n = 2 RMP maintaining good confinement H-H(98,H-y2) approximate to 0.95. Advances have been made with respect to detachment onset and control. Studies in advanced divertor configurations (Snowflake, Super-X and X-point target divertor) shed new light on SOL physics. Cross field filamentary transport has been characterised in a wide parameter regime on AUG, MAST and TCV progressing the theoretical and experimental understanding crucial for predicting first wall loads in ITER and DEMO. Conditions in the SOL also play a crucial role for ELM stability and access to small ELM regimes.
|
|
| 4. |
|
|
| 5. |
- Hamdi, Yosr, et al.
(författare)
-
Association of breast cancer risk in BRCA1 and BRCA2 mutation carriers with genetic variants showing differential allelic expression : identification of a modifier of breast cancer risk at locus 11q22.3
- 2017
-
Ingår i: Breast Cancer Research and Treatment. - : Springer Science and Business Media LLC. - 0167-6806 .- 1573-7217. ; 161:1, s. 117-134
-
Tidskriftsartikel (refereegranskat)abstract
- Purpose: Cis-acting regulatory SNPs resulting in differential allelic expression (DAE) may, in part, explain the underlying phenotypic variation associated with many complex diseases. To investigate whether common variants associated with DAE were involved in breast cancer susceptibility among BRCA1 and BRCA2 mutation carriers, a list of 175 genes was developed based of their involvement in cancer-related pathways. Methods: Using data from a genome-wide map of SNPs associated with allelic expression, we assessed the association of ~320 SNPs located in the vicinity of these genes with breast and ovarian cancer risks in 15,252 BRCA1 and 8211 BRCA2 mutation carriers ascertained from 54 studies participating in the Consortium of Investigators of Modifiers of BRCA1/2. Results: We identified a region on 11q22.3 that is significantly associated with breast cancer risk in BRCA1 mutation carriers (most significant SNP rs228595 p = 7 × 10−6). This association was absent in BRCA2 carriers (p = 0.57). The 11q22.3 region notably encompasses genes such as ACAT1, NPAT, and ATM. Expression quantitative trait loci associations were observed in both normal breast and tumors across this region, namely for ACAT1, ATM, and other genes. In silico analysis revealed some overlap between top risk-associated SNPs and relevant biological features in mammary cell data, which suggests potential functional significance. Conclusion: We identified 11q22.3 as a new modifier locus in BRCA1 carriers. Replication in larger studies using estrogen receptor (ER)-negative or triple-negative (i.e., ER-, progesterone receptor-, and HER2-negative) cases could therefore be helpful to confirm the association of this locus with breast cancer risk.
|
|
| 6. |
|
|
| 7. |
- Buunen, M, et al.
(författare)
-
COLOR II. A randomized clinical trial comparing laparoscopic and open surgery for rectal cancer.
- 2009
-
Ingår i: Danish medical bulletin. - 1603-9629 .- 0907-8916. ; 56:2, s. 89-91
-
Tidskriftsartikel (refereegranskat)abstract
- INTRODUCTION: Laparoscopic resection of rectal cancer has been proven efficacious but morbidity and oncological outcome need to be investigated in a randomized clinical trial. Trial design: Non-inferiority randomized clinical trial. METHODS: The COLOR II trial is an ongoing international randomized clinical trial. Currently 27 hospitals from Europe, South Korea and Canada are including patients. The primary endpoint is loco-regional recurrence rate three years post-operatively. Secondary endpoints cover quality of life, overall and disease free survival, post-operative morbidity and health economy analysis. RESULTS: By July 2008, 27 hospitals from the Netherlands, Belgium, Germany, Sweden, Spain, Denmark, South Korea and Canada had included 739 patients. The intra-operative conversion rate in the laparoscopic group was 17%. Distribution of age, location of the tumor and radiotherapy were equal in both treatment groups. Most tumors are located in the mid-rectum (41%). CONCLUSION: Laparoscopic surgery in the treatment of rectal cancer is feasible. The results and safety of laparoscopic surgery in the treatment of rectal cancer remain unknown, but are subject of interim analysis within the COLOR II trial. Completion of inclusion is expected by the end of 2009. Trial registration: Clinicaltrials.gov, identifier: NCT00297791 (www.clinicaltrials.gov).
|
|
| 8. |
- Juul, Louise, et al.
(författare)
-
Combining pressing and alkaline extraction to increase protein yield from Ulva fenestrata biomass
- 2022
-
Ingår i: Food and Bioproducts Processing: Transactions of the Institution of of Chemical Engineers, Part C. - : Elsevier BV. - 1744-3571 .- 0960-3085. ; 134, s. 80-85
-
Tidskriftsartikel (refereegranskat)abstract
- Many seaweed species have a high production potential and attract interest as future protein sources. A high fiber and ash content, however, demand extraction of the protein to improve its digestibility and protein utilization in food or feed. This study explores three different approaches for protein extraction from Ulva fenestrata in order to maximize the protein extraction yield. Soluble protein was recovered either by mechanical pressing or by homogenization and osmotic shock of the biomass followed by alkaline extraction. The soluble protein was then concentrated by isoelectric precipitation. A combined procedure was carried out by pressing the biomass and following subjecting the residual pulp fraction to homogenization, osmotic shock and alkaline extraction. The three methods were ranked as follows with respect to protein extraction yield (as % of biomass protein); the combined method (23.9 ± 0.3%)> the alkaline extraction (6.8 ± 0.2%)> mechanical pressing (5.0 ± 0.2%). The significant increase when combining the methods was ascribed to a high precipitation yield after alkaline extraction of the pulp, hypothesized to be due to a reduced conductivity of the alkali-soluble protein fraction when derived from pulp rather than whole biomass.
|
|
| 9. |
|
|
| 10. |
- Dhar, S., et al.
(författare)
-
Multi-axial Fatigue of Head-Hardened Pearlitic and Austenitic Manganese Railway Steels: A Comparative Study
- 2020
-
Ingår i: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. - : Springer Science and Business Media LLC. - 1073-5623. ; 51:11, s. 5639-5652
-
Tidskriftsartikel (refereegranskat)abstract
- Switches and crossings (S&Cs) in rail networks suffer from damage and deformation due to severe loading of their complex geometric shapes. This article presents a comparative study of the cyclic deformation characteristics and fatigue behavior of two typical crossing materials, namely head-hardened pearlitic steel and Hadfield manganese steel, as well as the associated microstructural changes. Both uniaxial and biaxial loadings (proportional and non-proportional) are studied. The pearlitic steel endured more cycles to failure for a given strain amplitude compared to the manganese steel. The cyclic response of manganese steel shows significant hardening whereas softening was observed for the pearlitic steel except under biaxial non-proportional loading. The microstructures developed in the two types of steels after deformation are characterized by optical (OM) and transmission electron microscopy (TEM). TEM micrographs reveal that the deformed microstructure of the pearlitic steel consists of threading dislocations and dislocation tangles in the ferrite lamellae. The microstructures in the manganese steel after the different loadings are composed of dislocation cells with dislocation tangles inside, intersected by straight stacking fault lamellae. The observed microstructures are related to the results of the mechanical test, and the suitability of the steels for use in S&Cs is discussed.
|
|
