| 1. |
- Jiang, Wen, 1990-
(författare)
-
Acid-catalyzed Liquefaction of Industrial Side-streams for Producing Wood Adhesives and Particleboard
- 2022
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Big quantities of residues and side-streams are generated annually from forest-based and agricultural industries all around the world and present a relatively unexplored renewable resource. Due to the absence of a regularly updated and systematic database of supply, industrial residues and side-streams usually end up in landfill disposal, are used for energy generation, or remain at the production sites. These renewable side-streams are mainly lignocellulosic materials that can be used for fuels, chemicals, and other value-added materials. However, the difficulty in recovering useful components from industrial wastes from a techno-economic point of view is hindering the use of these materials. There are different methods for converting biomass into fuels, chemicals, and materials, including thermochemical, biochemical, and physical conversion. Negative environmental impacts from direct incineration of waste materials and increasing interest in reducing the dependency on fossil-based sources have increased the need for the valorization of the industrial side-streams for material and chemical applications. Among the different thermochemical conversion methods, liquefaction of lignocellulosic materials is an efficient way to convert solid biomass into liquids. Liquefaction including hydrothermal liquefaction (HTL) and moderate acid-catalyzed liquefaction (MACL), is often carried out in an aqueous environment by employing organic solvents with or without catalyst under pressure or ambient conditions. A liquefaction process is influenced by many factors such as material type, solvent, catalyst, time, and temperature. All the parameters of the liquefaction are related to each other, and they affect the yields and the properties of the final products. Studies on the utilization of industrial waste and side-streams as feedstock for liquefaction have increased in recent years, generating significant interest from both academia and industry. This PhD study included a literature review on liquefaction technologies that provide liquefied products for wood adhesives, followed by experimental work on MACL and its optimization for different industrial side-streams, such as wood sawdust, bark, and oat husks. Liquefaction of those materials led to different liquefaction yields (LY) due to their different chemical compositions. When the same liquefaction conditions were applied, liquefied wood sawdust had the highest LY while liquefied bark had the lowest. This was mainly attributed to wood sawdust having a higher cellulose and lower lignin content, when compared to bark and oat husks. After optimizing the liquefaction of wood sawdust, obtained products were applied in wood adhesive formulations successfully. Crude liquefied wood (CLW) and purified liquefied wood (PLW) polyols were obtained from the liquefaction of wood sawdust with the highest LY of 99.7% and used for the synthesis of polyurethane (PU) adhesives by reacting them with polymeric diphenylmethane diisocyanate (pMDI). The bonding strength and penetration to wood adherends of the PU adhesives were affected by the molar ratios between the isocyanate groups (NCO) in pMDI and the hydroxyl groups (OH) in the CLW and PLW. The highest bonding strength of PU adhesives was achieved at an NCO:OH molar ratio of 1.5:1. The thermal stability of the PU adhesives was improved by increasing the NCO:OH molar ratio. PU adhesives based on CLW and PLW with the same adhesive formulation did not show significant differences in their properties while CLW polyol contained more water and alcohols than PLW. A novel method called partial liquefaction of lignocellulosic biomass was also proposed. Partially liquefied bark (PLB) was prepared and used to replace wood particles for producing particleboards (PB) with or without the presence of a commercial synthetic adhesive, i.e. melamine-urea-formaldehyde (MUF). PLB was shown to provide single-layer PBs with good adhesion, mechanical strength, and water repellency. The overall mechanical properties of non-MUF single-layer PBs were inferior to those of MUF-bonded PBs. Increasing the PLB content up to 9.5% led to enhanced mechanical properties for MUF-bonded PBs. PLB prepared from bark with a particle size less than 2 mm ensured good mechanical behavior of single-layer PBs. Moreover, three-layer particleboards prepared from PLB and wood particles had comparable mechanical properties to the reference PBs made solely from wood particles, and PLB had less influence on the mechanical properties of the PBs when used in the surface layer than in the core layer. Formaldehyde emissions from the three-layer PBs were below the limits required by European Standard EN 13986:2004 and major volatile organic compounds (VOCs) were carboxylic acids. This research provided a comprehensive understanding of converting different lignocellulosic materials by a MACL process into valuable polymers and raw materials, which are suitable for the synthesis of wood adhesives and for the manufacturing of particleboards. Due to time constraints related to conducting the PhD, it was not possible to conduct a full characterization of the liquefied products from the selected materials. Such studies should be part of future research in order to supplement our knowledge of MACL mechanisms.
|
|
| 2. |
- Jiang, Wen, 1990-, et al.
(författare)
-
Preparation of Polyurethane Adhesives from Crude and Purified Liquefied Wood Sawdust
- 2021
-
Ingår i: Polymers. - Basel, Switzerland : MDPI. - 2073-4360. ; 13
-
Tidskriftsartikel (refereegranskat)abstract
- Polyurethane (PU) adhesives were prepared with bio-polyols obtained via acid-catalyzedpolyhydric alcohol liquefaction of wood sawdust and polymeric diphenylmethane diisocyanate(pMDI). Two polyols, i.e., crude and purified liquefied wood (CLW and PLW), were obtained fromthe liquefaction process with a high yield of 99.7%. PU adhesives, namely CLWPU and PLWPU,were then prepared by reaction of CLW or PLW with pMDI at various isocyanate to hydroxyl group(NCO:OH) molar ratios of 0.5:1, 1:1, 1.5:1, and 2:1. The chemical structure and thermal behavior of thebio-polyols and the cured PU adhesives were analyzed by Fourier transform infrared spectroscopy(FTIR) and thermogravimetric analysis (TGA). Performance of the adhesives was evaluated by singlelap joint shear tests according to EN 302-1:2003, and by adhesive penetration. The highest shearstrength was found at the NCO:OH molar ratio of 1.5:1 as 4.82 ± 1.01 N/mm2 and 4.80 ± 0.49 N/mm2 for CLWPU and PLWPU, respectively. The chemical structure and thermal properties of the cured CLWPU and PLWPU adhesives were considerably influenced by the NCO:OH molar ratio.
|
|
| 3. |
- Lin, Keshuo, et al.
(författare)
-
Risk factors and cognitive correlates of white matter hyperintensities in ethnically diverse populations without dementia: The COSMIC consortium
- 2024
-
Ingår i: ALZHEIMER'S & DEMENTIA: DIAGNOSIS, ASSESSMENT & DISEASE MONITORING. - 2352-8729. ; 16:1
-
Tidskriftsartikel (refereegranskat)abstract
- INTRODUCTIONWhite matter hyperintensities (WMHs) are an important imaging marker for cerebral small vessel diseases, but their risk factors and cognitive associations have not been well documented in populations of different ethnicities and/or from different geographical regions.METHODSWe investigated how WMHs were associated with vascular risk factors and cognition in both Whites and Asians, using data from five population-based cohorts of non-demented older individuals from Australia, Singapore, South Korea, and Sweden (N = 1946). WMH volumes (whole brain, periventricular, and deep) were quantified with UBO Detector and harmonized using the ComBat model. We also harmonized various vascular risk factors and scores for global cognition and individual cognitive domains.RESULTSFactors associated with larger whole brain WMH volumes included diabetes, hypertension, stroke, current smoking, body mass index, higher alcohol intake, and insufficient physical activity. Hypertension and stroke had stronger associations with WMH volumes in Whites than in Asians. No associations between WMH volumes and cognitive performance were found after correction for multiple testing.CONCLUSIONThe current study highlights ethnic differences in the contributions of vascular risk factors to WMHs.
|
|
| 4. |
- Wang, Shule, et al.
(författare)
-
Van Krevelen diagrams based on machine learning visualize feedstock-product relationships in thermal conversion processes
- 2023
-
Ingår i: Communications Chemistry. - : Springer Nature. - 2399-3669. ; 6:1
-
Tidskriftsartikel (refereegranskat)abstract
- Feedstock properties play a crucial role in thermal conversion processes, where understanding the influence of these properties on treatment performance is essential for optimizing both feedstock selection and the overall process. In this study, a series of van Krevelen diagrams were generated to illustrate the impact of H/C and O/C ratios of feedstock on the products obtained from six commonly used thermal conversion techniques: torrefaction, hydrothermal carbonization, hydrothermal liquefaction, hydrothermal gasification, pyrolysis, and gasification. Machine learning methods were employed, utilizing data, methods, and results from corresponding studies in this field. Furthermore, the reliability of the constructed van Krevelen diagrams was analyzed to assess their dependability. The van Krevelen diagrams developed in this work systematically provide visual representations of the relationships between feedstock and products in thermal conversion processes, thereby aiding in optimizing the selection of feedstock and the choice of thermal conversion technique.
|
|
