| 1. |
- Dong, Zhihua, et al.
(författare)
-
Invariant plastic deformation mechanism in paramagnetic nickel-iron alloys
- 2021
-
Ingår i: Proceedings of the National Academy of Sciences of the United States of America. - : Proceedings of the National Academy of Sciences. - 0027-8424 .- 1091-6490. ; 118:14
-
Tidskriftsartikel (refereegranskat)abstract
- The Invar anomaly is one of the most fascinating phenomena observed in magnetically ordered materials. Invariant thermal expansion and elastic properties have attracted substantial scientific attention and led to important technological solutions. By studying planar faults in the high-temperature magnetically disordered state of Ni1-cFec, here we disclose a completely different anomaly. An invariant plastic deformation mechanism is characterized by an unchanged stacking fault energy with temperature within wide concentration and temperature ranges. This anomaly emerges from the competing stability between the face-centered cubic and hexagonal close-packed structures and occurs in other paramagnetic or nonmagnetic systems whenever the structural balance exists. The present findings create a platform for tailoring high-temperature properties of technologically relevant materials toward plastic stability at elevated temperatures.
|
|
| 2. |
- Dong, Zhihua, et al.
(författare)
-
Thermo-mechanical properties of Cr-Co-Ni alloys from longitudinal spin fluctuation theory
- 2021
-
Ingår i: Applied Physics Letters. - : AIP Publishing. - 0003-6951 .- 1077-3118. ; 119:8
-
Tidskriftsartikel (refereegranskat)abstract
- Accounting for longitudinal spin fluctuations in the paramagnetic state, we calculate elastic constants and stacking fault energy as a function of temperature and chemical composition for Cr-Co-Ni alloys. The longitudinal spin fluctuations are demonstrated to be important for the quantitative description of the thermo-mechanical properties and the corresponding chemical and temperature dependences. Replacing Ni with Cr and Co is found to yield opposite influence on the mechanical properties at finite temperature. A high thermal stability in plasticity is predicted in the low Cr regime in Cr-Co-Ni alloys, while a good thermal stability in elasticity can be achieved in the high Cr and low Co regime. The present advance in thermo-chemical-magnetic-property enhances the understanding required for an intelligent design of multicomponent alloys toward high-technology applications. Published under an exclusive license by AIP Publishing.
|
|
| 3. |
- Feng, Nianjie, et al.
(författare)
-
Changes in chemical structures of wheat straw auto-hydrolysis lignin by 3-hydroxyanthranilic acid as a laccase mediator
- 2019
-
Ingår i: International Journal of Biological Macromolecules. - : ELSEVIER SCIENCE BV. - 0141-8130 .- 1879-0003. ; 122, s. 210-215
-
Tidskriftsartikel (refereegranskat)abstract
- 3-Hydroxyanthranilic acid (3-HAA), as a potential natural laccase mediator, was shown to mediate the oxidation of non-phenolic lignin subunits. The problem of cost and toxicity of artificial mediators could be solved to some extent by a further study about the detailed changes of lignin chemistry structures in laccase 3-HAA system (LHS). In this work, wheat straw auto-hydrolysis lignin (AL) was prepared. Oxidations of AL by LHS and laccase 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) system were then investigated, respectively. Various structural changes of AL during the oxidation were characterized by different methods including phenolic hydroxyl group determination, nitrobenzene oxidation, ozonation, gel permeation chromatography, ultraviolet-visible spectroscopy, Fourier transform infrared spectroscopy and two-dimensional nuclear magnetic resonance (2D NMR) spectroscopy. The changes in AL chemical structures were found in LHS, including unit removal, bond cleavage and biopolymerization. Compared to laccase ABTS system, a selective removal of guaiacyl-type lignin in LHS was observed, based on the results of nitrobenzene oxidation and 2D NMR analysis. The selective removal of guaiacyl-type lignin was due to improved aromatic ring cleavage and weaken lignin biopolymerization. The selectivity of guaiacyl-type lignin removal in LHS plays an important role, especially for improving bioconversion efficiency of laccase for guaiacyl-rich lignocellulosic biomass.
|
|
| 4. |
- Gu, Hongchang, et al.
(författare)
-
Inheritance patterns of the transcriptome in hybrid chickens and their parents revealed by expression analysis
- 2019
-
Ingår i: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322. ; 9
-
Tidskriftsartikel (refereegranskat)abstract
- Although many phenotypic traits of chickens have been well documented, the genetic patterns of gene expression levels in chickens remain to be determined. In the present study, we crossed two chicken breeds, White Leghorn (WL) and Cornish (Cor), which have been selected for egg and meat production, respectively, for a few hundred years. We evaluated transcriptome abundance in the brain, muscle, and liver from the day-old progenies of pure-bred WL and Cor, and the hybrids of these two breeds, by RNA-Seq in order to determine the inheritance patterns of gene expression. Comparison among expression levels in the different groups revealed that most of the genes showed conserved expression patterns in all three examined tissues and that brain had the highest number of conserved genes, which indicates that conserved genes are predominantly important compared to others. On the basis of allelic expression analysis, in addition to the conserved genes, we identified the extensive presence of additive, dominant (Cor dominant and WL dominant), over-dominant, and under-dominant genes in all three tissues in hybrids. Our study is the first to provide an overview of inheritance patterns of the transcriptome in layers and broilers, and we also provide insights into the genetics of chickens at the gene expression level.
|
|
| 5. |
- Huang, Liangliang, et al.
(författare)
-
Study on continuous cold-pressing technology of engineered wood flooring with EPI adhesive
- 2018
-
Ingår i: Wood research. - : Statny Drevarsky Vyskumny Ustav. - 1336-4561. ; 63:2, s. 335-342
-
Tidskriftsartikel (refereegranskat)abstract
- The effects of process parameters (adhesive spread, press time, and applied pressure) on the gluing performance of engineered wood flooring bonded with emulsion-polymer-isocyanate (EPI) adhesive were studied. The results showed (shear strength and aging test) that the major factors were adhesive spread and press time. The optimized parameters for best gluing performance of engineered wood flooring were 160 g.m-2, 14 s, and 60 s for adhesive spread, heat time, and press time, respectively, within certain ranges
|
|
| 6. |
- Liu, Wenjuan, et al.
(författare)
-
Strontium-Substituted Dicalcium Silicate Bone Cements with Enhanced Osteogenesis Potential for Orthopaedic Applications
- 2019
-
Ingår i: Materials. - : MDPI. - 1996-1944 .- 1996-1944. ; 12:14
-
Tidskriftsartikel (refereegranskat)abstract
- Incorporating Sr element in biomaterials for bone implants is an effective way to improve their biological performance, as Sr element has been proved to enhance bone regeneration and depress bone resorption activity. In the present study, we developed a Sr-incorporated dicalcium silicate (C2S) bone cement as a potential candidate for bioactive self-setting bone cement in orthopaedics and stomatology. The Sr-C2S powders containing 0.3-6.8% Sr in molar ratio were prepared by means of chemical co-precipitation, and the results of XRD analysis indicated the incorporation of Sr element into the lattice of C2S. Sr-C2S bone cements, as prepared by mixing the powders with water, have a final setting time of 570 to 594 min, and compressive strength higher than that of C2S bone cement within certain incorporation range. The Sr-C2S bone cements possessed good in vitro bioactivity by inducing apatite formation in simulated body fluid (SBF) within 7 days. Moreover, the proliferation activity of human bone marrow mesenchymal stem cells (hBMSCs) with Sr-C2S bone cements was significantly higher than that with C2S bone cement, and the alkaline phosphatase (ALP) activity of hBMSCs was also enhanced with addition of Sr element in Sr-C2S groups. The Sr-C2S might therefore be a bioactive self-setting material with enhanced biological performance and holds the prospect for application in the bone regeneration area.
|
|
| 7. |
- Sampson, Joshua N., et al.
(författare)
-
Analysis of Heritability and Shared Heritability Based on Genome-Wide Association Studies for 13 Cancer Types
- 2015
-
Ingår i: Journal of the National Cancer Institute. - : Oxford University Press (OUP). - 0027-8874 .- 1460-2105. ; 107:12
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Studies of related individuals have consistently demonstrated notable familial aggregation of cancer. We aim to estimate the heritability and genetic correlation attributable to the additive effects of common single-nucleotide polymorphisms (SNPs) for cancer at 13 anatomical sites. Methods: Between 2007 and 2014, the US National Cancer Institute has generated data from genome-wide association studies (GWAS) for 49 492 cancer case patients and 34 131 control patients. We apply novel mixed model methodology (GCTA) to this GWAS data to estimate the heritability of individual cancers, as well as the proportion of heritability attributable to cigarette smoking in smoking-related cancers, and the genetic correlation between pairs of cancers. Results: GWAS heritability was statistically significant at nearly all sites, with the estimates of array-based heritability, h(l)(2), on the liability threshold (LT) scale ranging from 0.05 to 0.38. Estimating the combined heritability of multiple smoking characteristics, we calculate that at least 24% (95% confidence interval [CI] = 14% to 37%) and 7% (95% CI = 4% to 11%) of the heritability for lung and bladder cancer, respectively, can be attributed to genetic determinants of smoking. Most pairs of cancers studied did not show evidence of strong genetic correlation. We found only four pairs of cancers with marginally statistically significant correlations, specifically kidney and testes (rho = 0.73, SE = 0.28), diffuse large B-cell lymphoma (DLBCL) and pediatric osteosarcoma (rho = 0.53, SE = 0.21), DLBCL and chronic lymphocytic leukemia (CLL) (rho = 0.51, SE = 0.18), and bladder and lung (rho = 0.35, SE = 0.14). Correlation analysis also indicates that the genetic architecture of lung cancer differs between a smoking population of European ancestry and a nonsmoking Asian population, allowing for the possibility that the genetic etiology for the same disease can vary by population and environmental exposures. Conclusion: Our results provide important insights into the genetic architecture of cancers and suggest new avenues for investigation.
|
|
| 8. |
- Shen, Qian, et al.
(författare)
-
The Genome of Artemisia annua Provides Insight into the Evolution of Asteraceae Family and Artemisinin Biosynthesis
- 2018
-
Ingår i: Molecular Plant. - : Cell Press. - 1674-2052 .- 1752-9867. ; 11:6, s. 776-788
-
Tidskriftsartikel (refereegranskat)abstract
- Artemisia annua, commonly known as sweet wormwood or Qinghao, is a shrub native to China and has long been used for medicinal purposes. A. annua is now cultivated globally as the only natural source of a potent anti-malarial compound, artemisinin. Here, we report a high-quality draft assembly of the 1.74-gigabase genome of A. annua, which is highly heterozygous, rich in repetitive sequences, and contains 63 226 protein-coding genes, one of the largest numbers among the sequenced plant species. We found that, as one of a few sequenced genomes in the Asteraceae, the A. annua genome contains a large number of genes specific to this large angiosperm clade. Notably, the expansion and functional diversification of genes encoding enzymes involved in terpene biosynthesis are consistent with the evolution of the artemisinin biosynthetic pathway. We further revealed by transcriptome profiling that A. annua has evolved the sophisticated transcriptional regulatory networks underlying artemisinin biosynthesis. Based on comprehensive genomic and transcriptomic analyses we generated transgenic A. annua lines producing high levels of artemisinin, which are now ready for large-scale production and thereby will help meet the challenge of increasing global demand of artemisinin.
|
|
| 9. |
- Wang, Xiaohua, et al.
(författare)
-
Tacrolimus Causes Hypertension by Increasing Vascular Contractility via RhoA (Ras Homolog Family Member A)/ROCK (Rho-Associated Protein Kinase) Pathway in Mice
- 2022
-
Ingår i: Hypertension. - : Ovid Technologies (Wolters Kluwer Health). - 0194-911X .- 1524-4563. ; 79:10, s. 2228-2238
-
Tidskriftsartikel (refereegranskat)abstract
- Background: To provide tacrolimus is first-line treatment after liver and kidney transplantation. However, hypertension and nephrotoxicity are common tacrolimus side effects that limit its use. Although tacrolimus-related hypertension is well known, the underlying mechanisms are not. Here, we test whether tacrolimus-induced hypertension involves the RhoA (Ras homolog family member A)/ROCK (Rho-associated protein kinase) pathway in male C57Bl/6 mice. methods: Intra-arterial blood pressure was measured under anesthesia. The reactivity of renal afferent arterioles and mesenteric arteries were assessed in vitro using microperfusion and wire myography, respectively. Results: Tacrolimus induced a transient rise in systolic arterial pressure that was blocked by the RhoA/ROCK inhibitor Fasudil (12.0 +/- 0.9 versus 3.2 +/- 0.7; P<0.001). Moreover, tacrolimus reduced the glomerular filtration rate, which was also prevented by Fasudil (187 +/- 20 versus 281 +/- 8.5; P<0.001). Interestingly, tacrolimus enhanced the sensitivity of afferent arterioles and mesenteric arteries to Ang II (angiotensin II), likely due to increased intracellular Ca2+ mobilization and sensitization. Fasudil prevented increased Ang II-sensitivity and blocked Ca2+ mobilization and sensitization. Preincubation of mouse aortic vascular smooth muscle cells with tacrolimus activated the RhoA/ROCK/MYPT-1 (myosin phosphatase targeting subunit 1) pathway. Further, tacrolimus increased cytoplasmic reactive oxygen species generation in afferent arterioles (107 +/- 5.9 versus 163 +/- 6.4; P<0.001) and in cultured mouse aortic vascular smooth muscle cells (100 +/- 7.5 versus 160 +/- 23.2; P<0.01). Finally, the reactive oxygen species scavenger Tempol inhibited tacrolimus-induced Ang II hypersensitivity in afferent arterioles and mesenteric arteries. Conclusions: The RhoA/ROCK pathway may play an important role in tacrolimus-induced hypertension by enhancing Ang II-specific vasoconstriction, and reactive oxygen species may participate in this process by activating the RhoA/ROCK pathway.
|
|
| 10. |
- Xiong, Wenjuan, et al.
(författare)
-
SiNx films and membranes for photonic and MEMS applications
- 2020
-
Ingår i: Journal of materials science. Materials in electronics. - : Springer Science and Business Media LLC. - 0957-4522 .- 1573-482X. ; 31, s. 90-97
-
Tidskriftsartikel (refereegranskat)abstract
- This work presents a novel process to form SiN x films and process for membranes with excellent mechanical properties for micro-electro-mechanical systems application as well as integration as IR waveguide for photonic application. The SiN x films were fabricated in SiNgen apparatus which is a single wafer chamber equipment compared to conventional low pressure chemical vapor deposition furnace process. The films showed low stress, good mechanical properties, but the synthesis also eradicates the issues of particle contamination. Through optimizing of the growth parameters and post annealing profile, low stress (40 Mpa) SiN x film could be finally deposited when annealing temperature rose up to 1150 °C. The stress relaxation is a result of more Si nano-crystalline which was formed during annealing, according to the FTIR results. The mechanical properties, Young’s modulus and hardness, were 210 Gpa and 20 Gpa respectively. For the waveguide application, a stack of three layers, SiO 2 /SiN x /SiO 2 was formed where the optimized layer thicknesses were used for minimum optical loss according to simulation feedback. After deposition of the first two layers in the stack, the samples were annealed in range of 900–1150 °C in order to release the stress. Chemical mechanical polish technique was applied to planarize the nitride layer prior to the oxide cladding layer. Such wafers can be used to bond to Si or Ge to manufacture advanced substrates.
|
|
