| 1. |
|
|
| 2. |
|
|
| 3. |
- Al-Maqdasi, Zainab, 1986-, et al.
(författare)
-
Characterization of Wood and Graphene Nanoplatelets (GNPs) Reinforced Polymer Composites
- 2020
-
Ingår i: Materials. - : MDPI. - 1996-1944. ; 13:9
-
Tidskriftsartikel (refereegranskat)abstract
- This paper investigates the utilization of commercial masterbatches of graphene nanoplatelets to improve the properties of neat polymer and wood fiber composites manufactured by conventional processing methods. The effect of aspect ratio of the graphene platelets (represented by the different number of layers in the nanoplatelet) on the properties of high-density polyethylene (HDPE) is discussed. The composites were characterized for their mechanical properties (tensile, flexural, impact) and physical characteristics (morphology, crystallization, and thermal stability). The effect of the addition of nanoplatelets on the thermal conductivity and diffusivity of the reinforced polymer with different contents of reinforcement was also investigated. In general, the mechanical performance of the polymer was enhanced at the presence of either of the reinforcements (graphene or wood fiber). The improvement in mechanical properties of the nanocomposite was notable considering that no compatibilizer was used in the manufacturing. The use of a masterbatch can promote utilization of nano-modified polymer composites on an industrial scale without modification of the currently employed processing methods and facilities.
|
|
| 4. |
- Al-Maqdasi, Zainab, 1986-, et al.
(författare)
-
Conductive Regenerated Cellulose Fibers by Electroless Plating
- 2019
-
Ingår i: Fibers. - Basel : MDPI. - 2079-6439. ; 7:5
-
Tidskriftsartikel (refereegranskat)abstract
- Continuous metallized regenerated cellulose fibers for advanced applications (e.g. multi-functional composites) are produced by electroless copper plating. Copper is successfully deposited on the surface of cellulose fibers using commercial cyanide-free electroless copper plating package commonly available for manufacturing of printed wiring boards. The deposited copper is found to enhance the thermal stability, electrical conductivity and resistance to moisture uptake of the fibers. On the other hand, involved chemistry results in altering the molecular structure of the fibers as is indicated by the degradation of their mechanical performance (tensile strength and modulus).
|
|
| 5. |
- Al-Maqdasi, Zainab, 1986-, et al.
(författare)
-
Conductive Regenerated Cellulose Fibers for Multi-Functional Composites : Mechanical and Structural Investigation
- 2021
-
Ingår i: Materials. - Basel, Switzerland : MDPI. - 1996-1944. ; 14:7
-
Tidskriftsartikel (refereegranskat)abstract
- Regenerated cellulose fibers coated with copper via electroless plating process are investigated for their mechanical properties, molecular structure changes, and suitability for use in sensing applications. Mechanical properties are evaluated in terms of tensile stiffness and strength of fiber tows before, during and after the plating process. The effect of the treatment on the molecular structure of fibers is investigated by measuring their thermal stability with differential scanning calorimetry and obtaining Raman spectra of fibers at different stages of the treatment. Results show that the last stage in the electroless process (the plating step) is the most detrimental, causing changes in fibers’ properties. Fibers seem to lose their structural integrity and develop surface defects that result in a substantial loss in their mechanical strength. However, repeating the process more than once or elongating the residence time in the plating bath does not show a further negative effect on the strength but contributes to the increase in the copper coating thickness, and, subsequently, the final stiffness of the tows. Monitoring the changes in resistance values with applied strain on a model composite made of these conductive tows show an excellent correlation between the increase in strain and increase in electrical resistance. These results indicate that these fibers show potential when combined with conventional composites of glass or carbon fibers as structure monitoring devices without largely affecting their mechanical performance.
|
|
| 6. |
- Al-Maqdasi, Zainab, 1986-
(författare)
-
Development of Constituents for Multi-functional Composites Reinforced with Cellulosic Fibers
- 2019
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Bio-basedcomposites are being increasingly used in applications where weight saving,and environmental friendliness is as important as structural performance. Obviously, bio-based materials have their limitations regarding durability and stability of the properties,but their potential in use for advanced applications can be expanded if they were functionalized and considered beyond their structural performance.Multifunctionalityincomposites can be achieved by modifyingeither of the composite constituents at different levelsso that they can perform energy-associated roles besides their structural reinforcement in the system. For the fibers, this can be done at the microscale by altering theirmicrostructure during spinning process or by applying functional coatings. As for the matrix, it is usually done by incorporating additives that can impart the required characteristics to the matrix. The nano-sized additives that mightbe considered for this objective are graphene and carbon nano-tubes. A big challenge with such materials is the difficulty to reachthe dispersionstate necessary for formation ofstable network to overcome the percolation threshold for conductivity. However, once the network is formed, the composite can have improved mechanical performance together with one or more of the added functionalities such as barrier capabilities,thermal and/or electrical conductivities or electromagnetic interference ability.Enormous work has been done to achieve the functionality incomposites produced with special care in laboratories. However, when it comes to mass production, it is both cost and energy inefficient to use tedious,complex methods for the manufacturing. Hence there is a need to investigate the potential of using scalable and industrial-relevant techniques and materials with acceptable compromise between cost and properties.The work presented in this thesis is performedwithin two projects aiming to achieve functional composites based on natural and man-made cellulosic fibers suitable for industrial upscaling. Conductive Regenerated Cellulose Fibers (RCFs) were produced by coating them with copper by electroless coating process using commercial materials. On the other hand, commercial masterbatches based on Graphene Nano-Platelets (GNPs) were used to produce wood polymer composites (WPC) with added multifunctionality by melt extrusion process. The process is one of the conventional methods used inpolymerproductionand needsno modifications for processingfunctional composites. Both materials together can be used to produce hybrid functional composites.The incorporation of the GNP into HDPE has resulted in improvement in the mechanical propertiesof polymer as well as composite reinforced with wood fibers. Stiffness has increased to a large extent while effect on the strength was less pronounced(>100% and 18% for stiffness and strength at 15%GNP loading). The enhancement of thermal conductivityat higher graphene loadingswas also observed. Moreover, time-dependent response of the polymer has also been affected and the addition of GNP has resulted in reduced viscoplastic strains and improved creep behavior.The copper-coated cellulose fibers showed a significant increasein electrical conductivity(<1Ω/50mm of coated samples) and a potential in use as sensor materials. However, these results come with the cost of reduction in mechanical properties of fibers (10% and 70% for tensile stiffness and strength, respectively) due to theeffect ofchemicals involved in the process.
|
|
| 7. |
|
|
| 8. |
- Al-Maqdasi, Zainab, 1986-
(författare)
-
Multifunctionality and Durability of Cellulosic Fiber Reinforced Polymer Composites
- 2022
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The overall objective of this thesis is to develop and evaluate cellulose-based fiber composites with added multifunctionality for advanced applications. In the strive towards sustainable societies and industries, materials as well as production processes need to be assessed against the sustainability criteria and selected accordingly. Cellulosic fibers reinforced polymer composites are being increasingly used in applications where weight saving, and environmental friendliness is as important as structural performance. Nonetheless, these materials have their limitations regarding durability and stability of the properties, but their potential in use for advanced applications can be expanded if functionalized and considered beyond their structural performance. Such multi-functionality of composites can be achieved by the coating of fibers and/or modifying the matrix with functional reinforcement, or by both of these routes combined. Coating of fibers and modifying the matrix with nano-reinforcement are two selected approaches for imparting functionality to the cellulosic fiber composites in the current study. Conductive Regenerated Cellulose Fibers (RCFs) were produced by coating commercial RCFs with copper via electroless plating process. Electrical conductivity and mechanical performance were evaluated, and the coated fibers were transformed into an embedded strains sensor-like assembly that could be used as structural health monitoring system in composites structures. A noticeable degradation in the mechanical strength of fibers was realized and it was attributed to the influence of the chemicals of the final plating step of process on the chains of cellulose as well as the loss of crystalline order in the RCF. In order to obtain modified matrix (nanocomposites) for multifunctional wood polymer composites (WPC), the commercial masterbatches based on Graphene Nanoplatelets (GNPs) were utilized by melt extrusion process. Effect of the processing parameters in terms of change in screw configurations and the change in composition of the constituents on the structure and mechanical performance of the nanocomposites was studied. Results showed that there is insignificant effect of the change in the screw configuration in comparison with the effect of increasing the content of the GNPs. Stronger shear forces did not result in better dispersion of the nanoparticles. Addition of the compatibilizer, on the other hand, resulted in an adverse effect on the properties compared to the formulations where it is absent. The use of GNPs with larger aspect ratio resulted in much better improvement in the mechanical performance. Addition of the nanoparticles did not only improve mechanical performance but also resulted in increased thermal conductivity and diffusivity, especially when micro-scale reinforcement was added because of synergy between wood fibers and the GNPs. This synergy was reflected also in the significant 99% improved wear resistance and the >80% reduction in the creep strains of wood and graphene reinforced composites. During the design and selection of materials, quasi-static properties are often used as a selection criterion. However, in reality structures in use are often loaded during lengthy periods of time which are followed by multiple steps of unloading/reloading, depending on the service conditions. In such cases their time-dependent response becomes more crucial than instantaneous mechanical response. Typically, characterization of these properties requires a lot of time, but it may be significantly shortened if proper modeling and analysis are employed. The effect of addition of GNPs to the polymer and wood composites has been studied experimentally by short term creep tests. The materials showed highly nonlinear response even at very low loading stresses, but the addition of the nanoparticles resulted in a decrease in the nonlinearity and in the irreversible strains due to plasticity. Modelling approaches have been used to extract parameters from experimental data that could be used in predicting long term performance using Zapas model for viscoplasticity and Schapery’s model for nonlinear viscoelasticity. Overall, the results of the performed work contribute to enriching the research field with the potential the bio-based composites have to offer in the advanced application and how nano-scale reinforcement can interact synergistically with the micro-sized fibers to improve the overall performance of WPC and under different loading scenarios.
|
|
| 9. |
- Al-Maqdasi, Zainab, 1986-, et al.
(författare)
-
Performance of recycled glass fibers from composite parts by different treatments
- 2022
-
Ingår i: ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials. - Lausanne : EPFL Lausanne, Composite Construction Laboratory. - 9782970161400 ; , s. 77-84
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- In this work, glass fibers have been retrieved from decommissioned composite parts by three different methods. Namely, (i) pyrolysis, (ii) a novel solvolysis and (iii) a combination of solvolysis followed by pyrolysis. The techniques allowed successful recovering of sufficiently long fiber bundles (> 30 mm) that enabled separating single fibers for manual handling and testing. Single fiber tensile tests were performed to evaluate the efficiency of different recovery methods to preserve properties in comparison to the virgin fibers. The mechanical test results revealed that the stiffness of the recovered fibers has not been affected by the treatments. On the other hand, around 45% of the fiber’s strength was retained after the solvolysis process which is a comparable value to that found in literature.
|
|
| 10. |
|
|
