SwePub
Sök i SwePub databas

  Utökad sökning

Träfflista för sökning "WFRF:(Ju Yiguang) "

Sökning: WFRF:(Ju Yiguang)

  • Resultat 1-2 av 2
Sortera/gruppera träfflistan
   
NumreringReferensOmslagsbildHitta
1.
  • Burke, Sinead M., et al. (författare)
  • An experimental and modeling study of propene oxidation. Part 2: Ignition delay time and flame speed measurements
  • 2015
  • Ingår i: Combustion and Flame. - : Elsevier BV. - 0010-2180. ; 162:2, s. 296-314
  • Tidskriftsartikel (refereegranskat)abstract
    • Experimental data obtained in this study (Part II) complement the speciation data presented in Part I, but also offer a basis for extensive facility cross-comparisons for both experimental ignition delay time (IDT) and laminar flame speed (LFS) observables. To improve our understanding of the ignition characteristics of propene, a series of IDT experiments were performed in six different shock tubes and two rapid compression machines (RCMs) under conditions not previously studied. This work is the first of its kind to directly compare ignition in several different shock tubes over a wide range of conditions. For common nominal reaction conditions among these facilities, cross-comparison of shock tube IDTs suggests 20-30% reproducibility (2 sigma) for the IDT observable. The combination of shock tube and RCM data greatly expands the data available for validation of propene oxidation models to higher pressures (2-40 atm) and lower temperatures (750-1750 K). Propene flames were studied at pressures from 1 to 20 atm and unburned gas temperatures of 295-398 K for a range of equivalence ratios and dilutions in different facilities. The present propene-air LFS results at 1 atm were also compared to LFS measurements from the literature. With respect to initial reaction conditions, the present experimental LFS cross-comparison is not as comprehensive as the IDT comparison; however, it still suggests reproducibility limits for the LFS observable. For the LFS results, there was agreement between certain data sets and for certain equivalence ratios (mostly in the lean region), but the remaining discrepancies highlight the need to reduce uncertainties in laminar flame speed experiments amongst different groups and different methods. Moreover, this is the first study to investigate the burning rate characteristics of propene at elevated pressures (>5 atm). IDT and LFS measurements are compared to predictions of the chemical kinetic mechanism presented in Part I and good agreement is observed. (C) 2014 The Combustion Institute. Published by Elsevier Inc. All rights reserved.
  •  
2.
  • Thorsen, Lauge S., et al. (författare)
  • High pressure oxidation of NH3/n-heptane mixtures
  • 2023
  • Ingår i: Combustion and Flame. - 0010-2180. ; 254
  • Tidskriftsartikel (refereegranskat)abstract
    • Oxidation of NH3/n-heptane mixtures at pressures up to 100 atm and temperatures of 400–900 K was characterized experimentally in a laminar flow reactor and a jet-stirred reactor. A detailed chemical kinetic model was developed, updating the hydrogen and amine subsets and introducing a subset for the chemical coupling with emphasis on the NH2+n-heptane reaction. The kinetic model provided a good prediction of the ignition delay times measured in a rapid compression machine by Yu et al. (Combust. Flame 217 (2020) 2–11) as well as the high pressure experimental data obtained in the present work. The results show that it is important to include updated rate constants for NH2 + HO2 and NH2 + n-C7H16 to obtain reliable predictions for ignition and oxidation of NH3/n-heptane mixtures at high pressure. The effectiveness of implementing analogy rules for determining the rate constant of the key reaction NH2 + n-C7H16 was confirmed by the observed results.
  •  
Skapa referenser, mejla, bekava och länka
  • Resultat 1-2 av 2

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy