| 1. |
- Apelgren, Peter, et al.
(författare)
-
In Vivo Human Cartilage Formation in Three-Dimensional Bioprinted Constructs with a Novel Bacterial Nanocellulose Bioink
- 2019
-
Ingår i: Acs Biomaterials Science & Engineering. - : American Chemical Society (ACS). - 2373-9878. ; 5:5, s. 2482-2490
-
Tidskriftsartikel (refereegranskat)abstract
- Bacterial nanocellulose (BNC) is a 3D network of nanofibrils exhibiting excellent biocompatibility. Here, we present the aqueous counter collision (ACC) method of BNC disassembly to create bioink with suitable properties for cartilage-specific 3D-bioprinting. BNC was disentangled by ACC, and fibril characteristics were analyzed. Bioink printing fidelity and shear-thinning properties were evaluated. Cell-laden bioprinted grid constructs (5 X 5 X 1 mm(3)) containing human nasal chondrocytes (10 M mL(-1)) were implanted in nude mice and explanted after 30 and 60 days. Both ACC and hydrolysis resulted in significantly reduced fiber lengths, with ACC resulting in longer fibrils and fewer negative charges relative to hydrolysis. Moreover, ACC-BNC bioink showed outstanding printability, postprinting mechanical stability, and structural integrity. In vivo, cell-laden structures were rapidly integrated, maintained structural integrity, and showed chondrocyte proliferation, with 32.8 +/- 13.8 cells per mm(2) observed after 30 days and 85.6 +/- 30.0 cells per mm(2) at day 60 (p = 0.002). Furthermore, a full-thickness skin graft was attached and integrated completely on top of the 3D-bioprinted construct. The novel ACC disentanglement technique makes BNC biomaterial highly suitable for 3D-bioprinting and clinical translation, suggesting cell-laden 3D-bioprinted ACC-BNC as a promising solution for cartilage repair.
|
|
| 2. |
- Aulin, Christian, et al.
(författare)
-
Transparent Nanocellulosic Multilayer Thin Films on Polylactic Acid with Tunable Gas Barrier Properties
- 2013
-
Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 5:15, s. 7352-7359
-
Tidskriftsartikel (refereegranskat)abstract
- The layer-by-layer (LbL) deposition method was used for the build-up of alternating layers of nanofibrillated cellulose (NFC) or carboxymethyl cellulose (CMC) with a branched, cationic polyelectrolyte, polyethyleneimine (PEI) on flexible poly (lactic acid) (PLA) substrates. With this procedure, optically transparent nanocellulosic films with tunable gas barrier properties were formed. 50 layer pairs of PEI/NFC and PEI/CMC deposited on PLA have oxygen permeabilities of 0.34 and 0.71 cm(3).mu m/m(2).day.kPa at 23 degrees C and 50% relative humidity, respectively, which is in the same range as polyvinyl alcohol and ethylene vinyl alcohol. The oxygen permeability of these multilayer nanocomposites outperforms those of pure NFC films prepared by solvent-casting. The nanocellulosic LbL assemblies on PLA substrates was in detailed characterized using a quartz crystal microbalance with dissipation (QCM-D). Atomic force microscopy (AFM) reveals large structural differences between the PEI/NFC and the PEI/CMC assemblies, with the PEI/NFC assembly showing a highly entangled network of nanofibrils, whereas the PEI/CMC surfaces lacked structural features. Scanning electron microscopy images showed a nearly perfect uniformity of the nanocellulosic coatings on PLA, and light transmittance results revealed remarkable transparency of the LbL-coated PLA films. The present work demonstrates the first ever LbL films based on high aspect ratio, water-dispersible nanofibrillated cellulose, and water-soluble carboxymethyl cellulose polymers that can be used as multifunctional films and coatings with tailorable properties, such as gas barriers and transparency. Owing to its flexibility, transparency and high-performance gas barrier properties, these thin film assemblies are promising candidates for several large-scale applications, including flexible electronics and renewable packaging.
|
|
| 3. |
- Bordoni, Matteo, et al.
(författare)
-
3D Printed Conductive Nanocellulose Scaffolds for the Differentiation of Human Neuroblastoma Cells
- 2020
-
Ingår i: Cells. - : MDPI AG. - 2073-4409. ; 9:3
-
Tidskriftsartikel (refereegranskat)abstract
- We prepared cellulose nanofibrils-based (CNF), alginate-based and single-walled carbon nanotubes (SWCNT)-based inks for freeform reversible embedding hydrogel (FRESH) 3D bioprinting of conductive scaffolds. The 3D printability of conductive inks was evaluated in terms of their rheological properties. The differentiation of human neuroblastoma cells (SH-SY5Y cell line) was visualized by the confocal microscopy and the scanning electron microscopy techniques. The expression of TUBB3 and Nestin genes was monitored by the RT-qPCR technique. We have demonstrated that the conductive guidelines promote the cell differentiation, regardless of using differentiation factors. It was also shown that the electrical conductivity of the 3D printed scaffolds could be tuned by calcium-induced crosslinking of alginate, and this plays a significant role on neural cell differentiation. Our work provides a protocol for the generation of a realistic in vitro 3D neural model and allows for a better understanding of the pathological mechanisms of neurodegenerative diseases.
|
|
| 4. |
- Bosmans, Toon, 1988, et al.
(författare)
-
Assembly of Debranched Xylan from Solution and on Nanocellulosic Surfaces
- 2014
-
Ingår i: Biomacromolecules. - : American Chemical Society (ACS). - 1525-7797 .- 1526-4602. ; 15:3, s. 924-930
-
Tidskriftsartikel (refereegranskat)abstract
- This study focused on the assembly characteristics of debranched xylan onto cellulose surfaces. A rye arabinoxylan polymer with an initial arabinose/xylose ratio of 0.53 was debranched with an oxalic acid treatment as a function of time. The resulting samples contained reduced arabinose/xylose ratios significantly affecting the molecular architecture and solution behavior of the biopolymer. With this treatment, an almost linear xylan with arabinose DS of only 0.04 was obtained. The removal of arabinose units resulted in the self-assembly of the debranched polymer in water into stable nanoparticle aggregates with a size around 300 nm with a gradual increase in crystallinity of the isolated xylan. Using quartz crystal microbalance with dissipation monitoring, the adsorption of xylan onto model cellulose surfaces was quantified. Compared to the nonmodified xylan, the adsorption of debranched xylan increased from 0.6 to 5.5 mg m(-2). Additionally, adsorption kinetics suggest that the nanoparticles rapidly adsorbed to the cellulose surfaces compared to the arabinoxylan. In summary, a control of the molecular structure of xylan influences its ability to form a new class of polysaccharide nanoparticles in aqueous suspensions and its interaction with nanocellulose surfaces.
|
|
| 5. |
|
|
| 6. |
|
|
| 7. |
|
|
| 8. |
|
|
| 9. |
|
|
| 10. |
|
|
