| 1. |
- Achenbach, Jan-Ole, et al.
(författare)
-
Low temperature oxidation behavior of Mo2BC coatings
- 2020
-
Ingår i: Journal of Vacuum Science & Technology. A. Vacuum, Surfaces, and Films. - : A V S AMER INST PHYSICS. - 0734-2101 .- 1520-8559. ; 38:2
-
Tidskriftsartikel (refereegranskat)abstract
- Mo2BC exhibits a unique combination of high stiffness and moderate ductility, enabling the application as a protective and wear resistant coating. As the low temperature oxidation behavior of Mo2BC coatings is unexplored, direct current magnetron sputtered Mo2BC coatings were oxidized at temperatures ranging from 500 to 100 degrees C for up to 28 days. Time-of-flight elastic recoil detection analysis reveals that the onset of oxidation takes place at approximately 300 degrees C as a significant increase in the O content was observed. Crystalline oxide scales containing orthorhombic MoO3 were identified after oxidation for 15 min at 500 degrees C and 10 days at 200 degrees C. Isothermal oxidation at 200 and 100 degrees C exhibits oxide scale thicknesses of 401 +/- 33 and 22 +/- 10 nm after 14 days. Oxidation for 28 days at 100 degrees C exhibits an oxide scale thickness of 13 +/- 3 nm, which is comparable to the aforementioned oxide scale thickness after oxidation for 14 days at 100 degrees C. Based on the combination of mechanical properties and the here reported low temperature oxidation behavior, Mo2BC coatings qualify for applications in solid wood machining and low temperature forming processes at temperatures close to 100 degrees C or below.
|
|
| 2. |
- Aghda, Soheil Karimi, et al.
(författare)
-
Ion kinetic energy- and ion flux-dependent mechanical properties and thermal stability of (Ti,Al)N thin films
- 2023
-
Ingår i: Acta Materialia. - : Elsevier. - 1359-6454 .- 1873-2453. ; 250
-
Tidskriftsartikel (refereegranskat)abstract
- Ion-irradiation-induced changes in structure, elastic properties, and thermal stability of metastable c-(Ti,Al)N thin films synthesized by high-power pulsed magnetron sputtering (HPPMS) and cathodic arc deposition (CAD) are systematically investigated by experiments and density functional theory (DFT) simulations. While films deposited by HPPMS show a random orientation at ion kinetic energies (Ek)>105 eV, an evolution towards (111) orientation is observed in CAD films for Ek>144 eV. The measured ion energy flux at the growing film surface is 3.3 times larger for CAD compared to HPPMS. Hence, it is inferred that formation of the strong (111) texture in CAD films is caused by the ion flux-and ion energy-induced strain energy minimization in defective c-(Ti,Al)N. The ion energy-dependent elastic modulus can be rationalized by considering the ion energy-and orientation -dependent formation of point defects from DFT predictions: The balancing effects of bombardment-induced Frenkel defects formation and the concurrent evolution of compressive intrinsic stress result in the apparent independence of the elastic modulus from Ek for HPPMS films without preferential orientation. However, an ion energy-dependent elastic modulus reduction of similar to 18% for the CAD films can be understood by considering the 34% higher Frenkel pair concentration formed at Ek=182 eV upon irradiation of the experimentally observed (111)-oriented (Ti,Al)N in comparison to the (200)-configuration at similar Ek. Moreover, the effect of Frenkel pair concentration on the thermal stability of metastable c-(Ti,Al)N is investigated by differential scanning calorimetry: Ion-irradiation-induced increase in Frenkel pairs concentration retards the wurtzite formation temperature by up to 206 degrees C.
|
|
| 3. |
- Aghda, Soheil Karimi, et al.
(författare)
-
Valence electron concentration- and N vacancy-induced elasticity in cubic early transition metal nitrides
- 2023
-
Ingår i: Acta Materialia. - : Elsevier. - 1359-6454 .- 1873-2453. ; 255
-
Tidskriftsartikel (refereegranskat)abstract
- Motivated by frequently reported deviations from stoichiometry in cubic transition metal nitride (TMNx) thin films, the effect of N-vacancy concentration on the elastic properties of cubic TiNx, ZrNx, VNx, NbNx, and MoNx (0.72 & LE; x & LE; 1.00) is systematically studied by density functional theory (DFT) calculations. The predictions are validated experimentally for VNx (0.77 & LE; x & LE; 0.97). The DFT results indicate that the elastic behavior of the TMNx depends on both the N-vacancy concentration and the valence electron concentration (VEC) of the transition metal: While TiNx and ZrNx exhibit vacancy-induced reductions in elastic modulus, VNx and NbNx show an increase. These trends can be rationalized by considering vacancy-induced changes in elastic anisotropy and bonding. While introduction of N-vacancies in TiNx results in a significant reduction of elastic modulus along all directions and a lower average bond strength of Ti-N, the vacancy-induced reduction in [001] direction of VNx is overcompensated by the higher stiffness along [011] and [111] directions, resulting in a higher average bond strength of V-N. To validate the predicted vacancy-induced changes in elasticity experimentally, close-to-singlecrystal VNx (0.77 & LE; x & LE; 0.97) are grown on MgO(001) substrates. As the N-content is reduced, the relaxed lattice parameter a0, as probed by X-ray diffraction, decreases from 4.128 & ANGS; to 4.096 & ANGS;. This reduction in lattice parameter is accompanied by an anomalous 11% increase in elastic modulus, as determined by nanoindentation. As the experimental data agree with the predictions, the elasticity enhancement in VNx upon N-vacancy formation can be understood based on the concomitant changes in elastic anisotropy and bonding.
|
|
| 4. |
- Holzapfel, Damian M., et al.
(författare)
-
Influence of ion irradiation-induced defects on phase formation and thermal stability of Ti0.27Al0.21N0.52 coatings
- 2022
-
Ingår i: Acta Materialia. - : Elsevier. - 1359-6454 .- 1873-2453. ; 237
-
Tidskriftsartikel (refereegranskat)abstract
- The influence of changes induced by ion irradiation on structure and thermal stability of metastable cubic (Ti,Al)N coatings deposited by cathodic arc evaporation is systematically investigated by correlating experiments and theory. Decreasing the nitrogen deposition pressure from 5.0 to 0.5 Pa results in an ion flux-enhancement by a factor of three and an increase of the average ion energy from 15 to 30 eV, causing the stress-free lattice parameter to expand from 4.170 to 4.206 Å, while the chemical composition of Ti0.27Al0.21N0.52 remains unchanged. The 0.9% lattice parameter increase is a consequence of formation of Frenkel pairs induced by ion bombardment, as revealed by density functional theory (DFT) simulations. The influence of the presence of Frenkel pairs on the thermal stability of metastable Ti0.27Al0.21N0.52 is investigated by scanning transmission electron microscopy, differential scanning calorimetry, atom probe tomography and in-situ synchrotron X-ray powder diffraction. It is demonstrated that the ion flux and ion energy induced formation of Frenkel pairs increases the thermal stability as the Al diffusion enabled crystallization of the wurtzite solid solution is retarded. This can be rationalized by DFT predictions since the presence of Frenkel pairs increases the activation energy for Al diffusion by up to 142%. Hence, the thermal stability enhancement is caused by a hitherto unreported mechanism - the Frenkel pair impeded Al mobility and thereby retarded formation of wurtzite solid solution.
|
|
| 5. |
- Karimi Aghda, Soheil, et al.
(författare)
-
Unravelling the ion-energy-dependent structure evolution and its implications for the elastic properties of (V,Al)N thin films
- 2021
-
Ingår i: Acta Materialia. - : Elsevier. - 1359-6454 .- 1873-2453. ; 214
-
Tidskriftsartikel (refereegranskat)abstract
- Ion irradiation-induced changes in the structure and mechanical properties of metastable cubic (V,Al)N deposited by reactive high power pulsed magnetron sputtering are systematically investigated by correlating experiments and theory in the ion kinetic energy (Ek) range from 4 to 154 eV. Increasing Ek results in film densification and the evolution from a columnar (111) oriented structure at Ek ≤ 24 eV to a fine-grained structure with (100) preferred orientation for Ek ≥ 104 eV. Furthermore, the compressive intrinsic stress increases by 336 % to -4.8 GPa as Ek is increased from 4 to 104 eV. Higher ion kinetic energy causes stress relaxation to -2.7 GPa at 154 eV. These ion irradiation-induced changes in the thin film stress state are in good agreement with density functional theory simulations. Furthermore, the measured elastic moduli of (V,Al)N thin films exhibit no significant dependence on Ek. The apparent independence of the elastic modulus on Ek can be rationalized by considering the concurrent and balancing effects of bombardment-induced formation of Frenkel pairs (causing a decrease in elastic modulus) and evolution of compressive intrinsic stress (causing an increase in elastic modulus). Hence, the evolution of the film stresses and mechanical properties can be understood based on the complex interplay of ion irradiation-induced defect generation and annihilation.
|
|
| 6. |
- Keuter, Philipp, et al.
(författare)
-
A Proposal for a Composite with Temperature-Independent Thermophysical Properties : HfV2-HfV2O7
- 2020
-
Ingår i: Materials. - : MDPI AG. - 1996-1944. ; 13:21
-
Tidskriftsartikel (refereegranskat)abstract
- The HfV2-HfV2O7 composite is proposed as a material with potentially temperature-independent thermophysical properties due to the combination of anomalously increasing thermoelastic constants of HfV2 with the negative thermal expansion of HfV2O7. Based on literature data, the coexistence of both a near-zero temperature coefficient of elasticity and a coefficient of thermal expansion is suggested for a composite with a phase fraction of approximately 30 vol.% HfV2 and 70 vol.% HfV2O7. To produce HfV2-HfV2O7 composites, two synthesis pathways were investigated: (1) annealing of sputtered HfV2 films in air to form HfV2O7 oxide on the surface and (2) sputtering of HfV2O7/HfV2 bilayers. The high oxygen mobility in HfV2 is suggested to inhibit the formation of crystalline HfV2-HfV2O7 composites by annealing HfV2 in air due to oxygen-incorporation-induced amorphization of HfV2. Reducing the formation temperature of crystalline HfV2O7 from 550 degrees C, as obtained upon annealing, to 300 degrees C using reactive sputtering enables the synthesis of crystalline bilayered HfV2-HfV2O7.
|
|
| 7. |
- Steinhoff, Michael K., et al.
(författare)
-
Ag Surface and Bulk Segregations in Sputtered ZrCuAlNi Metallic Glass Thin Films
- 2022
-
Ingår i: Materials. - : MDPI AG. - 1996-1944. ; 15:5
-
Tidskriftsartikel (refereegranskat)abstract
- We report on the formation of Ag-containing ZrCuAlNi thin film metallic glass (nano)composites by a hybrid direct-current magnetron sputtering and high-power pulsed magnetron sputtering process. The effects of Ag content, substrate temperature and substrate bias potential on the phase formation and morphology of the nanocomposites were investigated. While applying a substrate bias potential did not strongly affect the morphological evolution of the films, the Ag content dictated the size and distribution of Ag surface segregations. The films deposited at low temperatures were characterized by strong surface segregations, formed by coalescence and Ostwald ripening, while the volume of the films remained featureless. At higher deposition temperature, elongated Ag segregations were observed in the bulk and a continuous Ag layer was formed at the surface as a result of thermally enhanced surface diffusion. While microstructural observations have allowed identifying both surface and bulk segregations, an indirect method for detecting the presence of Ag segregations is proposed, by measuring the electrical resistivity of the films.
|
|
