| 1. |
- Engstrand, Per O., 1955-, et al.
(författare)
-
Mekmassainitiativet för energieffektivitet, e2mp-i
- 2015
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- Projektet har drivits som ett program för finansiering av forskning som ska utveckla ochdemonstrera tekniker som reducerar elenergiförbrukningen med 50% vid tillverkning avTMP och CTMP med bibehållna slutproduktegenskaper hos tryckpapper och kartong.Programmet är en del av skogsindustrins initiativ att under en tioårsperiod tillsammansmed svenska och norska finansiärer investera minst 200 Mkr för att nå detta radikalaeffektiviseringsmål. Ett uttalat mål för industriinitiativet är också att befästaforskningsnoderna vid FSCN i Sundsvall och PFI i Trondheim.Parallellt med Energimyndighetens finansiering, 30 Mkr, har Norges Forskningsråd satsat25 MNOK (2010‐14) i industriinitiativet, KK‐stiftelsen 36 MSEK (2011‐17) ochMittuniversitetet har finansierat12 MSEK. Industrins totala satsning kommer att överstiga100 MSEK redan vid utgången av 2017.Resultat från benchmarkingstudien BAT2012 av industrins modernaste TMP‐ och CTMPlinjersamt från demonstrationsskaleprojekt visas i rapporten. Projekten baseras delvis pågrundläggande forskningsprojekt genomförda inom FSCN´s KK‐stiftelse‐finansieradeforskningsprofil och projektet ”Filling the Gap” 31676‐, ISSN 1650‐5387 2014:57. Resultaten visar följande reduktionsnivåer; 28% TMP för news (Braviken), 14% TMP för SC(Kvarnsveden) och 21% CTMP för kartong (Skoghall).Utöver demoprojekten finns ytterligare tydliga potentialer beskrivna i övriga delprojekt:Processintensifiering och processmodifiering > 15%Processtabilitet via avancerad processanalys och reglering > 15%Kombinera effektivaste processavsnitt från benchmarking ca 25%Detta gör det troligt att det kommer att gå att i fullskaliga demonstrationsförsök validera50% elenergireduktion inom de tre produktområdena, förutsatt att fortsattforskningsfinansiering finns tillgänglig. Tre av de idéer till avknoppningsprojekt somframkommit under projektets gång har redan erhållit beslut om finansiering frånEnergimyndigheten 2015. Ytterligare projektförslag baserade på den här redovisadeforskningen kommer att ingå i ansökningar under 2016. Utöver energireduktion i själva TMP‐ och CTMP‐processerna har forskare vid FSCN lagt forskningsgrunden för hur manska kunna tillverka mycket starka förpackningsmaterial från dessa massatyper på ettenergieffektivt sätt. Även inom detta område kommer en ansökning omuppskalningsprojekt att skickas in.
|
|
| 2. |
|
|
| 3. |
|
|
| 4. |
- Einarsson, Snorri, 1973, et al.
(författare)
-
Weight reduction intervention for obese infertile women prior to IVF: a randomized controlled trial.
- 2017
-
Ingår i: Human reproduction (Oxford, England). - : Oxford University Press (OUP). - 0268-1161 .- 1460-2350. ; 32:8, s. 1621-1630
-
Tidskriftsartikel (refereegranskat)abstract
- Does an intensive weight reduction programme prior to IVF increase live birth rates for infertile obese women?An intensive weight reduction programme resulted in a large weight loss but did not substantially affect live birth rates in obese women scheduled for IVF.Among obese women, fertility and obstetric outcomes are influenced negatively with increased risk of miscarriage and a higher risk of maternal and neonatal complications. A recent large randomized controlled trial found no effect of lifestyle intervention on live birth in infertile obese women.A prospective, multicentre, randomized controlled trial was performed between 2010 and 2016 in the Nordic countries. In total, 962 women were assessed for eligibility and 317 women were randomized. Computerized randomization with concealed allocation was performed in the proportions 1:1 to one of two groups: weight reduction intervention followed by IVF-treatment or IVF-treatment only. One cycle per patient was included.Nine infertility clinics in Sweden, Denmark and Iceland participated. Women under 38 years of age planning IVF, and having a BMI ≥30 and <35 kg/m2 were randomized to two groups: an intervention group (160 patients) with weight reduction before IVF, starting with 12 weeks of a low calorie liquid formula diet (LCD) of 880 kcal/day and thereafter weight stabilization for 2-5 weeks, or a control group (157 patients) with IVF only.In the full analysis set (FAS), the live birth rate was 29.6% (45/152) in the weight reduction and IVF group and 27.5% (42/153) in the IVF only group. The difference was not statistically significant (difference 2.2%, 95% CI: 12.9 to -8.6, P = 0.77). The mean weight change was -9.44 (6.57) kg in the weight reduction and IVF group as compared to +1.19 (1.95) kg in the IVF only group, being highly significant (P < 0.0001). Significantly more live births were achieved through spontaneous pregnancies in the weight reduction and IVF group, 10.5% (16) as compared to the IVF only group 2.6% (4) (P = 0.009). Miscarriage rates and gonadotropin dose used for IVF stimulation did not differ between groups. Two subgroup analyses were performed. The first compared women with PCOS in the two randomized groups, and the second compared women in the weight reduction group reaching BMI ≤ 25 kg/m2 or reaching a weight loss of at least five BMI units to the IVF only group. No statistical differences in live birth rates between the groups in either subgroup analysis were found.The study was not powered to detect a small increase in live births due to weight reduction and was not blinded for the patients or physician. Further, the intervention group had a longer time to achieve a spontaneous pregnancy, but were therefore slightly older than the control group at IVF. The study only included women with a BMI lower than 35 kg/m2.The study suggests that weight loss for obese women (BMI: 30-34.9 kg/m2) may not rectify the outcome in IVF cycles, although a significant higher number of spontaneous conceptions occurred in the weight loss group. Also, the study suggests that intensive weight reduction with LCD treatment does not negatively affects the results.The study was funded by Sahlgrenska University Hospital (ALFGBG-70 940), Merck AB, Solna, Sweden (an affiliate of Merck KGaA, Darmstadt, Germany), Impolin AB, Hjalmar Svensson Foundation and Jane and Dan Olsson Foundation. Dr Thurin-Kjellberg reports grants from Merck, non-financial support from Impolin AB, during the conduct of the study, and personal fees from Merck outside the submitted work. Dr Friberg reports personal fees from Ferring, Merck, MSD, Finox and personal fees from Studentlitteratur, outside the submitted work. Dr Englund reports personal fees from Ferring, and non-financial support from Merck, outside the submitted work. Dr Bergh reports and has been reimbursed for: writing a newsletter twice a year (Ferring), lectures (Ferring, MSD, Merck), and Nordic working group meetings (Finox). Dr Karlström reports lectures (Ferring, Finox, Merck, MSD) and Nordic working group meetings (Ferring). Ms Kluge, Dr Einarsson, Dr Pinborg, Dr Klajnbard, Dr Stenlöf, Dr Larsson, Dr Loft and Dr Wistrand have nothing to disclose.ClinicalTrials.gov number, NCT01566929.23-03-2012.05-10-2010.
|
|
| 5. |
- Eriksen, Jaran, et al.
(författare)
-
Antiretroviral treatment for HIV infection: Swedish recommendations 2016.
- 2017
-
Ingår i: Infectious diseases (London, England). - : Informa UK Limited. - 2374-4243 .- 2374-4235. ; 49:1, s. 1-34
-
Tidskriftsartikel (refereegranskat)abstract
- The Swedish Medical Products Agency and the Swedish Reference Group for Antiviral Therapy (RAV) have jointly published recommendations for the treatment of HIV infection on seven previous occasions (2002, 2003, 2005, 2007, 2009, 2011 and 2014). In February 2016, an expert group under the guidance of RAV once more revised the guidelines. The most important updates in the present guidelines are as follows: Tenofovir alafenamide (TAF) has recently been registered. TAF has several advantages over tenofovir disoproxilfumarate (TDF) and is recommended instead of TDF in most cases. First-line treatment for previously untreated individuals includes dolutegravir, boosted darunavir or efavirenz with either abacavir/lamivudine or tenofovir (TDF/TAF)/emtricitabine. Pre-exposure prophylaxis (PrEP) is recommended for high-risk individuals. As in the case of the previous publication, recommendations are evidence-graded in accordance with the Oxford Centre for Evidence Based Medicine ( http://www.cebm.net/oxford-centre-evidence-based-medicine-levels-evidence-march-2009/ ) ( Table 1 ). This document does not cover treatment of opportunistic infections and tumours. [Table: see text].
|
|
| 6. |
|
|
| 7. |
|
|
| 8. |
- Ferritsius, Olof, et al.
(författare)
-
Process considerations and its demands on TMP property measurements - A study on tensile index
- 2017
-
Ingår i: Nordic Pulp & Paper Research Journal. - 0283-2631 .- 2000-0669. ; 32:1, s. 45-53
-
Tidskriftsartikel (refereegranskat)abstract
- As a vital component in the strive towards improved energy efficiency in the operation of TMP refining processes, this work highlights the importance of well- designed procedures when collecting and analysing pulp properties with respect to process conditions. Process data and pulp from a CD82 chip refiner have been used to show that tensile index has strong covariance with fibre residence time calculated by the extended entropy model. A combination of theoretical and practical analysis methods has shown that, in order to assure representative, reliable results, pulp sampling procedures should comprise composite pulp samples collected during a sampling period of about three minutes. In addition, at least four subsequently collected composite pulp samples should be included in the analysis to effectively dampen effects from fast process variations as well as from slow process drift. An in-depth study on tensile index measurements clarifies that 40-60 strips should be used in the case we studied regardless if machine made paper or handsheets are considered.
|
|
| 9. |
- Ferritsius, Rita, et al.
(författare)
-
On energy efficiency in chip refining
- 2014
-
Ingår i: International Mechanical Pulping Conference, IMPC 2014. - : Paper Engineers' Association (PI). - 9780000000002
-
Konferensbidrag (refereegranskat)abstract
- The quality of TMP has been investigated for a CD82 chip refiner both with respect to normal variations and as a result of step changes of production rate, dilution water feed rates and plate gaps. A given level of tensile index was reached over a wide range in specific energy input. The energy efficiency with respect to tensile index decreased if the pulp consistency in the blow line exceeded 55 %. The extended entropy model applied on the refiner showed that the calculated pulp consistency after the flat zone could be extremely high, leading to lower energy efficiency. This was not possible to detect by the measured values for the pulp consistency in the blow line. The short time variations in tensile index correlated more strongly with the model based total residence time in the two refining zones than with the motor load.
|
|
| 10. |
- Ferritsius, Rita, et al.
(författare)
-
TMP properties and refiner conditions in a CD82 chip refiner at different operation points. Part II: Comparison of the five tests
- 2018
-
Ingår i: Nordic Pulp and Paper Research Journal. - : Walter de Gruyter GmbH. - 2000-0669 .- 0283-2631. ; 33:1, s. 82-94
-
Tidskriftsartikel (refereegranskat)abstract
- This paper is part two of a study on a CD 82 TMP chip refiner where relations between changes in the process conditions and changes in the properties of the produced pulp are investigated. Focus is on the ratio between tensile index and specific energy consumption when results from five tests are compared. Pulp properties were measured for composite pulp samples taken from the refiner blow line. Residence times and pulp consistencies were estimated by use of the extended entropy model. Clearly, an increase in specific energy does not necessarily implicate an increase in strength properties of the pulp produced. It is of high importance to have access to information about the refining zone conditions when searching for an optimal operation point in terms of the ratio between tensile index and specific energy. In these tests, this ratio had a maximum at about 55 % measured blow line consistency. Unfavourable operating conditions were identified at high pulp consistencies, especially after the FZ, where pulp consistencies well above 70 % were observed. The estimated residence time for each refining zone responded differently when applying changes in production rate, plate gaps and dilution water flow rates. In conclusion, the results associated with estimated pulp consistencies where easier to interpret compared with results for residence times, implying that additional tests are required for the latter variable. In addition to tensile index, pulp properties like freeness, Somerville shives and light scattering coefficient were included in the analysis.
|
|
