| 1. |
|
|
| 2. |
- Kazmi, Bilal, et al.
(författare)
-
Process system analysis on oil processing facility and economic viability from oil well-to-tank
- 2021
-
Ingår i: SN Applied Sciences. - : Springer Science and Business Media LLC. - 2523-3963 .- 2523-3971. ; 3:7
-
Tidskriftsartikel (refereegranskat)abstract
- Hydrocarbon processing from extraction to the final product is an important aspect that needs an optimised technology for consumption-led market growth. This study investigated real data from the oil processing facility and analysed the simulation model for the entire crude oil processing unit based on the process system engineering aspect using Aspen HYSYS. The study mainly emphasises the process optimisation in processing the hydrocarbon for the maximum yield of the product with less energy consumption. The investigation also includes a thorough economic analysis of the processing facility. The datasets for oil properties are obtained from a modern petroleum refinery. The investigation comprises of varying transient conditions, such as well shutdowns using three oil reservoirs (low, intermediate, and heavy oil). The impact of various conditions, including process heating, well shutdown, oil combinations, presence of water on the production, is analysed. The results indicate that the factors involving crude oil processing are significantly affected by the process conditions, such as pressure, volume, and temperature. The vapour recovery unit is integrated with the oil processing model to recover the separator's gas. The optimisation analysis is performed to maximise the liquid recovery with Reid vapour pressure of 7 and minimum water content in oil around 0.5%. Economic analysis provided an overall capital cost of $ 9.7 x 10(6) and an operating cost of $2.1 x 10(6) for the process configuration. The model results further investigate the constraints that maximise the overall energy consumption of the process and reduce the operational cost.
|
|
| 3. |
- Kazmi, Bilal, et al.
(författare)
-
Thermodynamic and economic assessment of cyano functionalized anion based ionic liquid for CO2 removal from natural gas integrated with, single mixed refrigerant liquefaction process for clean energy
- 2022
-
Ingår i: Energy. - : Pergamon Press. - 0360-5442 .- 1873-6785. ; 239
-
Tidskriftsartikel (refereegranskat)abstract
- The study proposes a novel integrated process in which ionic liquid is utilized to control carbon dioxide (CO2) emissions from the natural gas combined with a single mixed refrigerant-based liquefaction process to assist safe transportation over long distances providing a sustainable and cleaner energy. Commercially amines are utilized for CO2 sequestration, but amines entail energy-intensive regeneration with elevated process costs. The present study offers a solvent screening mechanism based on important parameters such as heat of dissolution, viscosity, selectivity, working capacity, vapor pressure, corrosivity, and toxicity. The selected solvents' performance is computed by sensitivity analysis suggesting imidazolium-based cation 1-hexyl-3-methylimidazolium[Hmim] functionalized with tricyanomethanide(tcm) as anion a potential natural gas sweetening solvent in comparison with commercially used solvent monoethanoloamine(MEA), conventional ILs 1-butyl-3-methylimidazolium hexa-fluorophosphate [Bmim][Pf(6)] and 1-butyl-3-methylimidazolium methyl sulfate [Bmim][MeSO4]. The obtained sweet gas is liquefied using a single mixed refrigerant-based process providing 0.99 mol fraction of liquefied CH4 with less overall specific compression power requirement of 0.41 kW/kg of natural gas. Moreover, an exergy analysis demonstrates that the [Hmim][tcm] based process has lower total exergy destruction of 7.49 x 10(3) kW and is found to utilize less overall specific energy consumption 0.49 kWh/kg of NG in contrast to other studied solvents. Furthermore, a detailed economic analysis establishes [Hmim][tcm]-based CO2 integrated with liquefaction technology offers 50.7%, 74.4%, and 85.8% of total annualized cost (TAC) savings compared with the MEA-amim][Pf(6)]-, and [Bmim][MeSO4], respectively. Hence, [Hmim][tcm] for CO2 removal and integration with liquefaction process will incur unit cost based on the total annualized cost to be $2.2 x 10(4)/kmol of purified NG.
|
|
| 4. |
- Kazmi, Bilal, et al.
(författare)
-
Towards a sustainable future : Bio-hydrogen production from food waste for clean energy generation
- 2024
-
Ingår i: Process Safety and Environmental Protection. - : Institution of Chemical Engineers. - 0957-5820 .- 1744-3598. ; 183, s. 555-567
-
Tidskriftsartikel (refereegranskat)abstract
- To address climate change, energy security, and waste management, new sustainable energy sources must be developed. This study uses Aspen Plus software to extract bio-H2 from food waste with the goal of efficiency and environmental sustainability. Anaerobic digestion, optimised to operate at 20–25 °C and keep ammonia at 3%, greatly boosted biogas production. The solvent [Emim][FAP], which is based on imidazolium, had excellent performance in purifying biogas. It achieved a high level of methane purity while consuming a minimal amount of energy, with a solvent flow rate of 13.415 m³ /h. Moreover, the utilization of higher temperatures (600–700 °C) during the bio-H2 generation phase significantly enhanced both the amount and quality of hydrogen produced. Parametric and sensitivity assessments were methodically performed at every stage. This integrated method was practicable and environmentally friendly, according to the economic assessment. H2 generation using steam reforming results in a TCC of 1.92 × 106 USD. The CO2 separation step has higher costs (TCC of 2.15 ×107 USD) due to ionic liquid washing and CO2 liquefaction. Compressor electricity consumption significantly impacts total operating cost (TOC), totaling 4.73 × 108 USD. showing its ability to reduce greenhouse gas emissions, optimize resource utilization, and promote energy sustainability. This study presents a sustainable energy solution that addresses climate and waste challenges.
|
|
| 5. |
- Naqvi, Salman Raza, et al.
(författare)
-
Techno economic analysis for advanced methods of green hydrogen production
- 2024
-
Ingår i: Current Opinion in Green and Sustainable Chemistry. - : Elsevier. - 2452-2236. ; 48
-
Forskningsöversikt (refereegranskat)abstract
- In the ongoing effort to reduce carbon emissions on a worldwide scale, green hydrogen, which is generated through environmentally responsible processes, has emerged as a significant driving force. As the demand for clean energy continues to rise, it is becoming increasingly important to have a solid understanding of the technological and economic elements of modern techniques of producing green hydrogen. In the context of green hydrogen generation understanding green hydrogen production’s techno-economic features is necessary to reduce carbon emissions and transition to a low-carbon economy associated with breakthroughs in technology, the present study examines the most fascinating and relevant aspects of techno-economic analysis. Despite challenges, green hydrogen can help the world move to a cleaner, more sustainable energy future with solid analytical frameworks and legislation.
|
|
| 6. |
- Taqvi, Syed Ali Ammar, et al.
(författare)
-
State-of-the-Art Review of Biomass Gasification : Raw to Energy Generation
- 2024
-
Ingår i: ChemBioEng Reviews. - : John Wiley & Sons. - 2196-9744.
-
Forskningsöversikt (refereegranskat)abstract
- Despite the increasing global need for sustainable energy, biomass gasification is becoming a highly promising method for transforming raw biomass into usable energy. The present review article analyzes the essential aspects of biomass-based energy production, starting with an assessment of existing energy needs and the crucial contribution that biomass can make in fulfilling these demands. The research investigates recent advancements in several biomass gasification methods, explaining their mechanics and discussing the related difficulties. The research conducts a thorough evaluation of the efficiency, yield, and environmental consequences of biomass gasification, aiming to determine the feasibility of the technique. In addition, the study rigorously assesses the techno-economic factors of energy generation from biomass, providing valuable information on the economic viability and scalability of various biomass gasification techniques. The present study is focused on providing a comprehensive understanding of biomass gasification by analyzing current improvements and conducting a techno-economic comparison to make well-informed decisions for a sustainable energy future. This review article examines the key aspects of energy production using biomass. It begins with an evaluation of our current energy requirements and the significant role that biomass can play in meeting these demands. The research explores recent developments in various biomass gasification techniques, explaining their mechanisms and discussing the challenges that come with them. The research conducts a comprehensive assessment of the effectiveness, productivity, and environmental impact of biomass gasification.
|
|
