1. |
- Fenstermacher, M.E., et al.
(författare)
-
DIII-D research advancing the physics basis for optimizing the tokamak approach to fusion energy
- 2022
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 62:4
-
Tidskriftsartikel (refereegranskat)abstract
- DIII-D physics research addresses critical challenges for the operation of ITER and the next generation of fusion energy devices. This is done through a focus on innovations to provide solutions for high performance long pulse operation, coupled with fundamental plasma physics understanding and model validation, to drive scenario development by integrating high performance core and boundary plasmas. Substantial increases in off-axis current drive efficiency from an innovative top launch system for EC power, and in pressure broadening for Alfven eigenmode control from a co-/counter-I p steerable off-axis neutral beam, all improve the prospects for optimization of future long pulse/steady state high performance tokamak operation. Fundamental studies into the modes that drive the evolution of the pedestal pressure profile and electron vs ion heat flux validate predictive models of pedestal recovery after ELMs. Understanding the physics mechanisms of ELM control and density pumpout by 3D magnetic perturbation fields leads to confident predictions for ITER and future devices. Validated modeling of high-Z shattered pellet injection for disruption mitigation, runaway electron dissipation, and techniques for disruption prediction and avoidance including machine learning, give confidence in handling disruptivity for future devices. For the non-nuclear phase of ITER, two actuators are identified to lower the L-H threshold power in hydrogen plasmas. With this physics understanding and suite of capabilities, a high poloidal beta optimized-core scenario with an internal transport barrier that projects nearly to Q = 10 in ITER at ∼8 MA was coupled to a detached divertor, and a near super H-mode optimized-pedestal scenario with co-I p beam injection was coupled to a radiative divertor. The hybrid core scenario was achieved directly, without the need for anomalous current diffusion, using off-axis current drive actuators. Also, a controller to assess proximity to stability limits and regulate β N in the ITER baseline scenario, based on plasma response to probing 3D fields, was demonstrated. Finally, innovative tokamak operation using a negative triangularity shape showed many attractive features for future pilot plant operation.
|
|
2. |
|
|
3. |
- Klionsky, Daniel J., et al.
(författare)
-
Guidelines for the use and interpretation of assays for monitoring autophagy
- 2012
-
Ingår i: Autophagy. - : Informa UK Limited. - 1554-8635 .- 1554-8627. ; 8:4, s. 445-544
-
Forskningsöversikt (refereegranskat)abstract
- In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field.
|
|
4. |
|
|
5. |
- Klionsky, Daniel J., et al.
(författare)
-
Guidelines for the use and interpretation of assays for monitoring autophagy in higher eukaryotes
- 2008
-
Ingår i: Autophagy. - : Landes Bioscience. - 1554-8627 .- 1554-8635. ; 4:2, s. 151-175
-
Forskningsöversikt (refereegranskat)abstract
- Research in autophagy continues to accelerate,1 and as a result many new scientists are entering the field. Accordingly, it is important to establish a standard set of criteria for monitoring macroautophagy in different organisms. Recent reviews have described the range of assays that have been used for this purpose.2,3 There are many useful and convenient methods that can be used to monitor macroautophagy in yeast, but relatively few in other model systems, and there is much confusion regarding acceptable methods to measure macroautophagy in higher eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers of autophagosomes versus those that measure flux through the autophagy pathway; thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from fully functional autophagy that includes delivery to, and degradation within, lysosomes (in most higher eukaryotes) or the vacuole (in plants and fungi). Here, we present a set of guidelines for the selection and interpretation of the methods that can be used by investigators who are attempting to examine macroautophagy and related processes, as well as by reviewers who need to provide realistic and reasonable critiques of papers that investigate these processes. This set of guidelines is not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to verify an autophagic response.
|
|
6. |
|
|
7. |
|
|
8. |
- Na, Yong-Su, et al.
(författare)
-
On benchmarking of simulations of particle transport in ITER
- 2019
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 59:7
-
Tidskriftsartikel (refereegranskat)abstract
- We report results of benchmarking of core particle transport simulations by a collection of codes widely used in transport modelling of tokamak plasmas. Our analysis includes formulation of transport equations, difference between electron and ion solvers, comparison of modules of the pellet and edge gas fuelling on the ITER baseline scenario. During the first phase of benchmarking we address the particle transport effects in the stationary phase. Firstly, simulations are performed with identical sources, sinks, transport coefficients, and boundary conditions prescribed in the flattop H-mode phase. The transformation of ion particle transport equations is introduced so to directly compare their results to electron transport solvers. Secondly, the pellet fuelling models are benchmarked in various conditions to evaluate the dependency of the pellet deposition on the pellet volume, injection side, pedestal, and separatrix parameters. Thirdly, edge gas fuelling is benchmarked to assess sensitivities of source profile predictions to uncertainties in plasma conditions and detailed model assumptions. At the second phase, we address particle transport effects in the time- evolving plasma including the current ramp-up to the ramp-down phase. The ion and the electron solvers are benchmarked together. Differences between the simulation results of the solvers are investigated in terms of equilibrium, grid resolution, radial coordinate, radial grid distribution, and plasma volume evolution term. We found that the selection of the radial coordinate can yield prominent differences between the solvers mainly due to differences in the edge grid distribution. The simulations reveal that electron and ion solvers predict noticeably different density peaking for the same diffusion and pinch velocity while with the peaked profile of helium, expected in fusion reactors. The fuelling benchmarking shows that gas puffing is not efficient for core fuelling in H-modes and density control should be done by the high field side pellet injection in contrast to present machines.
|
|
9. |
- Chaudhuri, K Ray, et al.
(författare)
-
King's Parkinson's disease pain scale, the first scale for pain in PD: An international validation.
- 2015
-
Ingår i: Movement Disorders. - : Wiley. - 0885-3185. ; 30:12, s. 1623-1631
-
Tidskriftsartikel (refereegranskat)abstract
- Pain is a key unmet need and a major aspect of non-motor symptoms of Parkinson's disease (PD). No specific validated scales exist to identify and grade the various types of pain in PD. We report an international, cross-sectional, open, multicenter, one-point-in-time evaluation with retest study of the first PD-specific pain scale, the King's PD Pain Scale. Its seven domains include 14 items, each item scored by severity (0-3) multiplied by frequency (0-4), resulting in a subscore of 0 to 12, with a total possible score range from 0 to 168. One hundred seventy-eight PD patients with otherwise unexplained pain (age [mean ± SD], 64.38 ± 11.38 y [range, 29-85]; 62.92% male; duration of disease, 5.40 ± 4.93 y) and 83 nonspousal non-PD controls, matched by age (64.25 ± 11.10 y) and sex (61.45% males) were studied. No missing data were noted, and floor effect was observed in all domains. The difference between mean and median King's PD Pain Scale total score was less than 10% of the maximum observed value. Skewness was marginally high (1.48 for patients). Factor analysis showed four factors in the King's PD Pain Scale, explaining 57% of the variance (Kaiser-Mayer-Olkin, 0.73; sphericity test). Cronbach's alpha was 0.78, item-total correlation mean value 0.40, and item homogeneity 0.22. Correlation coefficients of the King's PD Pain Scale domains and total score with other pain measures were high. Correlation with the Scale for Outcomes in PD-Motor, Non-Motor Symptoms Scale total score, and quality of life measures was high. The King's PD Pain Scale seems to be a reliable and valid scale for grade rating of various types of pain in PD. © 2015 International Parkinson and Movement Disorder Society.
|
|
10. |
- Coccolini, F., et al.
(författare)
-
Aortic balloon occlusion (REBOA) in pelvic ring injuries: preliminary results of the ABO Trauma Registry
- 2020
-
Ingår i: Updates in Surgery. - : Springer Science and Business Media LLC. - 2038-131X .- 2038-3312. ; 2020:72, s. 527-536
-
Tidskriftsartikel (refereegranskat)abstract
- EndoVascular and Hybrid Trauma Management (EVTM) has been recently introduced in the treatment of severe pelvic ring injuries. This multimodal method of hemorrhage management counts on several strategies such as the REBOA (resuscitative endovascular balloon occlusion of the aorta). Few data exist on the use of REBOA in patients with a severely injured pelvic ring. The ABO (aortic balloon occlusion) Trauma Registry is designed to capture data for all trauma patients in hemorrhagic shock where management includes REBOA placement. Among all patients included in the ABO registry, 72 patients presented with severe pelvic injuries and were the population under exam. 66.7% were male. Mean and median ISS were respectively 43 and 41 (SD ± 13). Isolated pelvic injuries were observed in 12 patients (16.7%). Blunt trauma occurred in 68 patients (94.4%), penetrating in 2 (2.8%) and combined in 2 (2.8%). Type of injury: fall from height in 15 patients (23.1%), traffic accident in 49 patients (75.4%), and unspecified impact in 1 patient (1.5%). Femoral access was gained pre-hospital in 1 patient, in emergency room in 43, in operating room in 12 and in angio-suite in 16. REBOA was positioned in zone 1 in 59 patients (81,9%), in zone 2 in 1 (1,4%) and in zone 3 in 12 (16,7%). Aortic occlusion was partial/periodical in 35 patients (48,6%) and total occlusion in 37 patients (51,4%). REBOA associated morbidity rate: 11.1%. Overall mortality rate was 54.2% and early mortality rate (≤ 24h) was 44.4%. In the univariate analysis, factors related to early mortality (≤ 24h) are lower pH values (p = 0.03), higher base deficit (p = 0.021), longer INR (p = 0.012), minor increase in systolic blood pressure after the REBOA inflation (p = 0.03) and total aortic occlusion (p = 0.008). None of these values resulted significant in the multivariate analysis. In severe hemodynamically unstable pelvic trauma management, REBOA is a viable option when utilized in experienced centers as a bridge to other treatments; its use might be, however, accompanied with severe-to-lethal complications. © 2020, Italian Society of Surgery (SIC).
|
|