| 1. |
- Khaliha, Sara, et al.
(författare)
-
Defective graphene nanosheets for drinking water purification : Adsorption mechanism, performance, and recovery
- 2021
-
Ingår i: FlatChem. - : Elsevier. - 2452-2627. ; 29
-
Tidskriftsartikel (refereegranskat)abstract
- Defect-rich graphene oxide (dGO) was used as sorbent for organic contaminants of emerging concern in tap water, including drugs and dyes, and the performance compared to those of lower-defects graphene types. The role of holes and carbonyl- carboxylic groups on graphene nanosheets surface on the adsorption mechanism and efficiency was investigated. dGO showed enhanced adsorption capacity toward two fluoroquinolone antibiotics (ofloxacin, OFLOX, and ciprofloxacin, CIPRO) in tap water with a maximum capacity of 650 mg/g, compared to 204 mg/g for Hummers derived commercial GO (hGO) and 125 mg/g for less defected Brodie derived GO (bGO) for OFLOX. The role of defects on the selective adsorption of OFLOX was also modelled by MD simulations, highlighting a mechanism mainly driven by the shape complementarity between the graphene holes and the molecules. Adsorption isotherms revealed different adsorption model for dGO, with a Langmuir fitting for dGO and BET fitting for all the other investigated samples. The maximum adsorption capacity of dGO for OFLOX was about six times higher than that of Granular Activated Carbon (95 mg/g), the industrial adsorption standard technology. Finally, it was also demonstrated that dGO can be recovered from treated water by ultrafiltration, this preventing secondary contamination risks and enabling safe use of graphene nanosheets for water purification.
|
|
| 2. |
- Khaliha, Sara, et al.
(författare)
-
Upcycling of plastic membrane industrial scraps and reuse as sorbent for emerging contaminants in water
- 2024
-
Ingår i: Environmental Science: Water Research and Technology. - 2053-1419 .- 2053-1400. ; 10:5, s. 1097-1107
-
Tidskriftsartikel (refereegranskat)abstract
- Scraps obtained as waste of the industrial production of polysulfone and polysulfone-graphene oxide hollow fiber membranes (PSU-HF and PSU-GO-HF, respectively) were converted into granular materials and used as sorbents of several classes of emerging and standard water contaminants, such as drugs, heavy metal ions, and a mixture of per- and poly-fluoroalkyl substances (PFASs). The millimetric sized granules (PSU and PSU-GO, respectively) outperformed granular activated carbon (GAC), the industrial sorbent benchmark, in the adsorption of lead, diclofenac, and PFOA from tap water. Adsorption mechanism insight was achieved by molecular dynamics simulations, demonstrating the key role of graphene oxide (GO) on PSU-GO material performance. With respect to GAC, PSU-GO adsorption capacity was two times higher for diclofenac and PFOA and ten times higher for lead. Material safety was assessed by surface enhanced Raman spectroscopy, excluding GO nanosheets leaching, and combined potability test. Overall, our work proves that scrap conversion and reuse is a valuable strategy to reduce plastic industrial waste disposal and to integrate standard technology for enhanced water purification.
|
|
| 3. |
- Mantovani, Sebastiano, et al.
(författare)
-
Amino acid-driven adsorption of emerging contaminants in water by modified graphene oxide nanosheets
- 2023
-
Ingår i: Environmental Science: Water Research and Technology. - : Royal Society of Chemistry (RSC). - 2053-1419 .- 2053-1400. ; 9:4, s. 1030-1040
-
Tidskriftsartikel (refereegranskat)abstract
- Graphene oxide nanosheets have shown promising adsorption properties toward emerging organic contaminants in drinking water. Here, we report a family of graphene oxide nanosheets covalently modified with amino acids and the study on their adsorption properties toward a mixture of selected contaminants, including pharmaceuticals, additives, and dyes. Graphene oxides modified with l-glutamic acid and l-methionine (GO-Glu and GO-Met) were synthesized and purified with a scalable and fast synthetic and purification procedure, and their structure was studied by combined X-ray photoelectron spectroscopy and elemental analysis. An amino acid loading of about 5% and a slight reduction (from 27% down to 14-20% oxygen) were found and associated with the adsorption selectivity. They were compared to unmodified GO, reduced GO (rGO), GO-lysine, and to the reference sample GO-NaOH. Each type of modified GO possesses a higher adsorption capacity toward bisphenol A (BPA), benzophenone-4 (BP4), and carbamazepine (CBZ) than standard GO and rGO, and the adsorption occurred within the first hour of contact time. The maximum adsorption capacity (estimated from the adsorption isotherms) was strictly related to the amino acid loading. Accordingly, molecular dynamics simulations highlighted higher interaction energies for the modified GOs than unmodified GO, as a result of higher van der Waals and hydrophobic interactions between the contaminants and the amino acid side chains on the nanosheet surface.
|
|
| 4. |
- Moro, Giulia, et al.
(författare)
-
Amino acid modified graphene oxide for the simultaneous capture and electrochemical detection of glyphosate
- 2024
-
Ingår i: Materials Today Chemistry. - 2468-5194. ; 36
-
Tidskriftsartikel (refereegranskat)abstract
- Amino acid modified graphene oxide derivatives (GO-AA) are herein proposed as active materials for the capture and consequent electrochemical detection of organic pollutants in aqueous media. Glyphosate (GLY), an herbicide present in many water compartments, was chosen as benchmark species to test the effectiveness of these materials for its electroactive nature, allowing direct evidence of the capture event. L-Lysine, L-Arginine or L-Methionine were grafted on GO surface through epoxide ring opening reaction, promoting the amino acids binding and the concomitant partial reduction of GO. The synthetic process results in a charge resistance drop from 8.1 KΩ for GO to 0.8–2.1 KΩ for the various GO-AA, supporting the applicability of these materials in electrochemical sensing. The resulting GO-Lysine, GO-Arginine and GO-Methionine were exploited for GLY adsorption from water. GO-Lysine was found to have the strongest interaction with GLY, with a removal efficiency of 76 % after 1 h, which is about two-fold higher than those of granular activated carbon, the industrial benchmark adsorbent. GO-AAs outperform the pristine unmodified material also when exploited as active materials for the capturing and following electrochemical detection of GLY. GO-Lysine showed the best sensitivity and allowed the recognition of GLY in water even when present at concentration levels down to 2 μg/L. Molecular dynamics simulations confirmed that the enhanced performance of this material can be ascribed to the hydrogen bond and salt bridge interactions between Lys moieties and GLY, originated from hydrogen bond and salt bridge interactions.
|
|
| 5. |
- Tunioli, Francesca, et al.
(författare)
-
Adsorption of emerging contaminants by graphene related materials and their alginate composite hydrogels
- 2023
-
Ingår i: Journal of Environmental Chemical Engineering. - : Elsevier BV. - 2213-3437 .- 2213-2929. ; 11:2
-
Tidskriftsartikel (refereegranskat)abstract
- Graphene nanosheets and nanoplatelets -alginate composite hydrogels were prepared by ionic gelation and the resulting gel beads were exploited for the removal of a mixture of eight selected emerging contaminants (ECs) in tap water, including bisphenol A, ofloxacin and diclofenac. The role of graphene related materials (GRM) on the gel bead structure, adsorption selectivity, kinetic, mechanism, and efficiency was investigated. Combined Scanning Electron Microscopy (SEM) and confocal Raman microscopy mapping showed a porous structure with pore size in the range of 100–200 µm and a homogeneous distribution of graphene nanosheets or nanoplatelets at the pores surface. The adsorption kinetic of GRM was much faster than that of granular activated carbon (GAC), the industrial sorbent benchmark, with removal capacity of ofloxacin from 2.9 to 4.3 times higher. A maximum adsorption capacity of 178 mg/g for rhodamine B was estimated by adsorption isotherm studies for reduced graphene oxide-based beads (a value comparable to that of powered activated carbon). Regeneration test performed on saturated beads by washing with EtOH, and subsequent reiterated reuses, showed no loss of adsorption performance up to the fourth reuse cycle.
|
|
| 6. |
- Zambianchi, Massimo, et al.
(författare)
-
Graphene oxide-polysulfone hollow fibers membranes with synergic ultrafiltration and adsorption for enhanced drinking water treatment
- 2022
-
Ingår i: Journal of Membrane Science. - : Elsevier BV. - 1873-3123 .- 0376-7388. ; 658
-
Tidskriftsartikel (refereegranskat)abstract
- Polysulfone-graphene oxide hollow fiber membranes (PSU-GO HFs) with simultaneous adsorption and ultrafiltration capabilities are herein described and proposed for enhanced and simplified Point-of-Use (POU) drinking water purification. The PSU-GO HFs were prepared by phase inversion extrusion by a customized semi-industrial plant and their morphology, surface properties, and porosity were investigated by combined Scanning Electron Microscopy (SEM), contact angle and Raman confocal microscopy, in relation to different GO:PSU ratios (1–5% w/w GO vs PSU) and to the final adsorption-ultrafiltration properties. Filtration modules of PSU-GO HFs of filtering surface (FS) in the range 0,015–0,28 m2 showed same ultrafiltration capability of PSU-HF standard filters. Synergic adsorption properties were demonstrated by studying the adsorption maximum capacity of ciprofloxacin antibiotic (CIPRO) vs GO ratio in dead end in-out configuration, the standard configuration used for PSU HFs commercial modules. Loading of 3,5% GO vs PSU was selected as case study, representing the best compromise between performance and GO nanofiller amount. Heavy metals (Pb, Cu and Cr(III)) and polyfluoroalkyl substances (PFAS) removal capabilities from tap water were competitive and in some cases outperformed Granular Activated Carbon (GAC), the standard industrial sorbent. Ciprofloxacin removal from tap water was also under real operational conditions. Moreover, release of GO from working PSU-GO modules was excluded by Surface Enhanced Raman Spectroscopy (SERS) analysis of treated water having the state-of-the-art limit of quantification of 0.1 μg/L for GO nanosheets.
|
|
