| 1. |
- Bahti, Soukaina, et al.
(författare)
-
Structures, stabilities, optoelectronic and photocatalytic properties of Janus aluminium mono-chalcogenides Al(Ga, In)STe monolayers
- 2022
-
Ingår i: Physica. E, Low-Dimensional systems and nanostructures. - : Elsevier. - 1386-9477 .- 1873-1759. ; 142
-
Tidskriftsartikel (refereegranskat)abstract
- Computational design of new two-dimensional materials constitutes an effective and promising approach in the development and exploration of a wide range of emerging applications such as optoelectronics, photocatalysis, energy storage, and conversion. Within the framework of this work, we systematically investigated for the first time, the structural, stability, optoelectronic, and pho-tocatalytic properties of new predicted Al(Ga, In)STe monolayers derived from Janus Aluminium mono-chalcogenides through Density Functional Theory and Ab-Initio molecular dynamic simulations. After a full optimization of both struc-tures, their dynamics and thermal stability was confirmed through the calculations of phonon spectrum and ab-initio molecular dynamics at a chosen temperature, respectively. Subsequently, the electronic and optical properties were explored and findings revealed that both monolayers exhibit a semiconducting characteristic with a direct and indirect electronic band gap of about 2.23 and 2.69 eV using HSE06 hybrid functional for AlGaSTe and AlInSTe monolayers, re-spectively. Furthermore, the optical absorption indicates a strong absorption of light in the range between 3 and 18 eV. More noticeably, Both Janus monolayers considered exhibiting a promising optical absorption in the visible wavelength region with an absorption coefficient greater than 105 cm−1. In addition, the photocatalytic properties of these structures were investigated by plotting the band edge positions straddle the reduction potential of H2 and the oxidation potential H2O. Based on our results, we conclude that both monolayers offer good thermodynamic stability allowing them to be processed experimentally and can be used as very appropriate candidates for optoelectronics and photocatalytic applications.
|
|
| 2. |
- Banerjee, Amitava, et al.
(författare)
-
Promise and reality of organic electrodes from materials design and charge storage perspective
- 2022
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry (RSC). - 2050-7488 .- 2050-7496. ; 10:29, s. 15215-15234
-
Forskningsöversikt (refereegranskat)abstract
- Organic electrode materials are becoming increasingly important as they reduce the C-footprint as well as the production cost of currently used and studied rechargeable batteries. With increasing demand for high-energy-density devices, over the past few decades, various innovative new materials based on the fundamental structure-property relationships and molecular design have been explored to enable high-capacity next-generation battery chemistries. One critical dimension that catalyzes this study is the building up of an in-depth understanding of the structure-property relationship and mechanism of alkali ion batteries. In this review, we present a critical overview of the progress in the technical feasibility of organic battery electrodes for use in long-term and large-scale electrical energy-storage devices based on the materials designing, working mechanisms, performance, and battery safety. Specifically, we discuss the underlying alkali ion storage mechanisms in specific organic batteries, which could provide the designing requirements to overcome the limitations of organic batteries. We also discuss the promising future research directions in the field of alkali ion organic batteries, especially multivalent organic batteries along with monovalent alkali ion organic batteries.
|
|
| 3. |
- Benhouria, Y., et al.
(författare)
-
Carbides-anti-perovskites Mn3(Sn, Zn)C : Potential candidates for an application in magnetic refrigeration
- 2020
-
Ingår i: Physica. E, Low-Dimensional systems and nanostructures. - : Elsevier BV. - 1386-9477 .- 1873-1759. ; 124
-
Tidskriftsartikel (refereegranskat)abstract
- In the present study, the combination of the First-principles density functional theory (DFT) calculations and Monte Carlo (MC) methods are investigated on the structural, magneto-electronic and magneto-caloric properties of the anti-perovskite carbides Mn3XC with X = Sn, Zn. Firstly, the electronic band structure and total/partial density of state of both Mn3SnC and Mn3ZnC are computed and compared to other theoretical and experimental works. Our results reveal that both Mn3SnC and Mn3ZnC structures exhibit a metallic behavior and the valence (VB) and conduction (CB) bands overlap considerably. Additionally, the magnetic and magneto-caloric properties including heat capacity (C), the entropy change (ΔS), adiabatic temperature (ΔT) and the refrigerant capacity (RC) were studied under the magnetic field ranging between 0 and 5 T for both anti-perovskites. Our findings suggest that both anti-perovskite carbide (Mn3SnC and Mn3ZnC) can act as an effective substrate for magnetic refrigeration.
|
|
| 4. |
- Haman, Zakaryae, et al.
(författare)
-
Computational identification of efficient 2D Aluminium chalcogenides monolayers for optoelectronics and photocatalysts applications
- 2021
-
Ingår i: Applied Surface Science. - : Elsevier BV. - 0169-4332 .- 1873-5584. ; 556
-
Tidskriftsartikel (refereegranskat)abstract
- The massive consumption of traditional fossil fuel like oil, coal and natural gas has led to serious environmental issues, which drove the search for cleaner renewable energy sources. One such option is photocatalytic water splitting that has attracted much attention as a viable process for the large scale production of hydrogen as a renewable fuel. Within this perspective, we methodically studied the structural, optoelectronic, and photocatalytic properties of two-dimensional aluminum monochalcogenide monolayers with the chemical formula AlX (X = O, S, Se, and Te) based on the framework of Density Functional Theory (DFT). All considered structures are full relaxed and their thermodynamic stabilities are confirmed by computing the phonon spectrum and Ab Initio Molecular Dynamics (AIMD) simulations. The electronic characteristics are also performed on the basis of both exchange correlation functional GGA-PBE and HSE06 in order to obtain the accurate electronic band gap. According to our calculations, all the four monolayers posses indirect band gaps ranging between 1.937 and 2.46 eV. Furthermore, based on desirable electronic band gaps, the optical performance features were further explored including complex refractive index, absorption coefficient and energy loss function by means of the complex dielectric function. It is found that all the four materials present a high absorption coefficient in the visible and Ultra-Violet regions. Finally, the band edge positions of our monolayers straddle the reduction potential of H2 and the oxidation potential H2O. Also, it was found that the Gibbs free energy of 2D AlO monolayer is 0.02 eV at certain applied external electric field and very close to ideal catalysts which suggest that the AlO monolayer is better candidate for hydrogen production. Our findings demonstrate that AlX monolayers are suitable materials for optoelectronics and hydrogen production via photocatalytic water splitting.
|
|
| 5. |
- Haman, Zakaryae, et al.
(författare)
-
Janus Aluminum Oxysulfide Al2OS : A promising 2D direct semiconductor photocatalyst with strong visible light harvesting
- 2022
-
Ingår i: Applied Surface Science. - : Elsevier. - 0169-4332 .- 1873-5584. ; 589
-
Tidskriftsartikel (refereegranskat)abstract
- Hydrogen production via solar light-driven water dissociation has been regarded as an artificial and effective process to overcome the environmental problem as well as solving the current energy crisis. In this regard, numerous works have mainly been devoted to developing the appropriate photocatalyst which satisfies the conditions for water splitting and understanding the photocatalysis process. In this study, we propose for the first time the potential application of the two-dimensional Janus aluminum oxysulfide Al2OS as an efficient photocatalyst material for hydrogen-production H-2 through the first-principles calculations. Janus Al2OS monolayer has been designed from the parental binary aluminum sulfide AlS by substituting one sub-layer of sulfide atoms (S) to oxygen atoms (O). The electronic properties of the pristine AlS and the derived Janus Al2OS were computed using GGA-PBE and HSE06 functionals. According to the band structure, AlS monolayer shows a semiconductor behavior with an indirect bandgap of 2.14 eV whereas, the Janus Al2OS exhibits a direct bandgap of 1.579 eV. Motivated by the desirable bandgap of the Janus Al2OS, the absorption-coefficient of Janus Al2OS shows strong visible light harvesting compared to the parental AlS. Furthermore, the photocatalytic performance of Al2OS has been investigated. Our calculations demonstrate that the band edge position of Al2OS is suitable for the hydrogen evolution reaction (HER). More importantly, based on the reaction coordinate, it was found that the Gibbs free-energy Delta G(H*) of Al2OS is 0.97 eV which is smaller than of the two-dimensional Janus Ga2XY (X, Y = S, Se, Te with X not equal Y) reported recently. Moreover, this value decreases from 0.97 eV to 0.69 eV under 0.5 V/angstrom of an external electrical field. Our results indicate that Janus Al2OS fulfills the fundamental requirements for efficient photo-catalyst under visible light and provides new guidance for hydrogen-production via water splitting.
|
|
| 6. |
- Haman, Zakaryae, et al.
(författare)
-
Photocatalytic and thermoelectric performance of asymmetrical two-dimensional Janus aluminum chalcogenides
- 2023
-
Ingår i: Journal of Physics. - : IOP Publishing. - 2515-7655. ; 5:3
-
Tidskriftsartikel (refereegranskat)abstract
- Through a density functional theory-driven survey, a comprehensive investigation of two-dimensional (2D) Janus aluminum-based monochalcogenides (Al2XY with X/Y = S, Se, and Te) has been performed within this study. To begin with, it is established that the examined phase, in which the Al-atoms are located at the two inner planes while the (S, Se, and Te)-atoms occupy the two outer planes in the unit cell, are energetically, mechanically, dynamically, and thermally stable. To address the electronic and optical properties, the hybrid function HSE06 has been employed. It is at first revealed that all three monolayers display a semiconducting nature with an indirect band gap ranging from 1.82 to 2.79 eV with a refractive index greater than 1.5, which implies that they would be transparent materials. Furthermore, the monolayers feature strong absorption spectra of around 10(5) cm(-1) within the visible and ultraviolet regions, suggesting their potential use in optoelectronic devices. Concerning the photocatalytic performance, the conduction band-edge positions straddle the hydrogen evolution reaction redox level. Also, it is observed that the computed Gibbs free energy is around 1.15 eV, which is lower and comparable to some recently reported 2D-based Janus monolayers. Additionally, the thermoelectric properties are further investigated and found to offer a large thermal power as well as a high figure of merit (ZT) around 1.03. The aforementioned results strongly suggest that the 2D Janus Al-based monochalcogenide exhibits suitable characteristics as a potential material for high-performance optoelectronic and thermoelectric applications.
|
|
| 7. |
- Khossossi, Nabil, et al.
(författare)
-
Ab initio study of a 2D h-BAs monolayer : a promising anode material for alkali-metal ion batteries
- 2019
-
Ingår i: Physical Chemistry, Chemical Physics - PCCP. - : ROYAL SOC CHEMISTRY. - 1463-9076 .- 1463-9084. ; 21:33, s. 18328-18337
-
Tidskriftsartikel (refereegranskat)abstract
- The selection of a suitable two dimensional anode material is one of the key steps in the development of alkali metal ion batteries to achieve superior performance with an ultrahigh rate of charging/discharging capability. Here, we have used state of the art density functional theory (DFT) to explore the feasibility of two dimensional (2D) honeycomb boron arsenide (h-BAs) as a potential anode for alkali-metal (Li/Na/K)-ion batteries. The structural and dynamic stability has been confirmed from the formation energy and the non-negative phonon frequency. The h-BAs monolayer exhibits negative adsorption-energy values of -0.422, -0.321 and -0.814 eV, for the Li, Na, and K-ions, respectively. Subsequently, during the charging process the adsorption-energy increases considerably without an energy-barrier when any of the A-atoms achieve a crucial distance (similar to 8 angstrom). In addition, it has been observed that insertion of the mono alkali metal atom into the h-BAs surface results in the semi-conducting nature of the monolayer being transformed into a metallic-state. The low energy barriers for Li (0.522 eV), Na (0.248), and K (0.204 eV) active ion migration imply high diffusion over the h-BAs surface, hence suggesting it has a high charge/discharge capability. Moreover, we have obtained low average operating voltages of 0.49 V (Li), 0.35 V (Na) and 0.26 V (K) and high theoretical capacities of 522.08 mA h g(-1) (for Li and Na) and 209.46 mA h g(-1) (for K) in this study. The aforementioned findings indicate that a h-BAs monolayer could be a promising anode material in the search for low cost and high performance alkali metal ion batteries.
|
|
| 8. |
- Khossossi, Nabil, et al.
(författare)
-
Exploring the Possibility of beta-Phase Arsenic-Phosphorus Polymorph Monolayer as Anode Materials for Sodium-Ion Batteries
- 2020
-
Ingår i: Advanced Theory and Simulations. - : Wiley-VCH Verlag. - 2513-0390. ; 3:8
-
Tidskriftsartikel (refereegranskat)abstract
- Graphite anode have shown commercial success for over two decades, since the start of their use in commercial Li-ion batteries, due to their high practical specific capacity, conductivity, and low lithiation potential. Graphite is to a large extent thermodynamically unfavorable for sodium-ion intercalation and thus limits advancement in Na-ion batteries. In this work, a beta-phase arsenic-phosphorus monolayer is studied, which has recently been predicted to have semiconducting behavior and to be dynamically stable. First-principles calculations based on density functional theory are used to explore the role of beta-AsP monolayer as a negative electrode for Na-ion batteries. Cohesive energy, phonon spectrum, and molecule dynamics simulations confirm the thermodynamic stability and the possibility of experimentally synthesizing this material. The Na-ion adsorption-energies are found to be high (>-1.2 eV) on both sides (As- and P-side). The ultra-fast energy barriers for Na (0.046/0.053 V) over both sides imply high diffusion of Na-ions on the surfaces of beta-AsP. During the evaluation of Na-ion anode performance, the fully sodiated state is found to be Na2AsP, which yields a high theoretical-specific capacity of 506.16 mAh g(-1)and low average sodiation potential of 0.43 V versus Na/Na+.
|
|
| 9. |
- Khossossi, Nabil, et al.
(författare)
-
Flexible 3D porous boron nitride interconnected network as a high-performance Li-and Na-ion battery electrodes
- 2022
-
Ingår i: Electrochimica Acta. - : Elsevier. - 0013-4686 .- 1873-3859. ; 421
-
Tidskriftsartikel (refereegranskat)abstract
- To achieve the high-rate efficiency in a electrochemical energy storage technologies, it is vital for the battery anode to be electronically as well as ionically conductive. Such a requirement has boosted the survey of three-dimensional (3D) porous networks made up of light-weight non-metallic elements, like carbon, boron, and nitride. A wide range of 3D porous materials composed of carbon and/or boron for Li/Na-ion batteries have been recently reported, whereas analogous efforts for lightest 3D porous boron nitride are yet to be addressed. In this work, we explore the 3D porous boron nitride network namely sp3-linked zigzag BN nanoribbons (BNNRs) with a width of 1 (lz1-BN) by assembling the 2D zigzag BNNRs and its first ever application as battery anodes for Li and Na ion batteries. Upon a consistent DFT and AIMD computations, It is revealed that the 3D porous lz1-BN ma-terial is chemically and thermally stable and yields a high specific capacity of about 539.94 mAh/g with respect to the commercialized graphite (372 mAh/g for LIBs) and recently reported Janus-graphite anode (≈332 mAh/g for SIBs), fast (Li+,Na+)-ionic diffusion, low potential voltage, and slight volume-expansion. Such puzzling electrochemical characteristics, along with the light-weight and high abundance of B and N elements, strongly support the possibility of 3D porous BN as a desirable candidate for Li and Na-ion battery anodes.
|
|
| 10. |
- Khossossi, Nabil, et al.
(författare)
-
High-Specific-Capacity and High-Performing Post-Lithium-Ion Battery Anode over 2D Black Arsenic Phosphorus
- 2021
-
Ingår i: ACS Applied Energy Materials. - : American Chemical Society (ACS). - 2574-0962. ; 4:8, s. 7900-7910
-
Tidskriftsartikel (refereegranskat)abstract
- Nowadays, secondary batteries based on sodium (Na), potassium (K), and magnesium (Mg) stimulate curiosity as eventually high-availability, nontoxic, and eco-friendly alternatives of lithium-ion batteries (LIBs). Against this background, a spate of studies has been carried out over the past few years on anode materials suitable for post-lithium-ion battery (PLIBs), in particular sodium-, potassium- and magnesium-ion batteries. Here, we have consistently studied the efficiency of a 2D alpha-phase arsenic phosphorus (alpha-AsP) as anodes through density functional theory (DFT) basin-hopping Monte Carlo algorithm (BHMC) and ab initio molecular dynamics (AIMD) calculations. Our findings show that alpha-AsP is an optimal anode material with very high stabilities, high binding strength, intrinsic metallic characteristic after (Na/K/Mg) adsorption, theoretical specific capacity, and ultralow ion diffusion barriers. The ultralow energy barriers are found to be 0.066 eV (Na), 0.043 eV (K), and 0.058 eV (Mg), inferior to that of the widely investigated MXene materials. During the charging process, a wide (Na+/K+/Mg2+) concentration storage from which a high specific capacity of 759.24/506.16/253.08 mAh/g for Na/K/Mg ions was achieved with average operating voltages of 0.84, 0.93, and 0.52 V, respectively. The above results provide valuable insights for the experimental setup of outstanding anode material for post-Li-ion battery.
|
|
