| 1. |
- Rodriguez Martinez, Xabier, et al.
(författare)
-
Air Processing of Thick and Semitransparent Laminated Polymer:Non-Fullerene Acceptor Blends Introduces Asymmetric Current-Voltage Characteristics
- 2023
-
Ingår i: Advanced Functional Materials. - : WILEY-V C H VERLAG GMBH. - 1616-301X .- 1616-3028. ; 33:27
-
Tidskriftsartikel (refereegranskat)abstract
- Non-fullerene acceptors have recently revolutionized indoor organic photovoltaics (OPVs) with power conversion efficiencies exceeding 30% in laboratory scale. Nevertheless, transferring their superior performance to larger-scale prototyping, i.e., air-processing via roll-to-roll compatible techniques, still shows severe challenges. Herein, the industrial potential of the PM6:IO4Cl blend, which is one of the most successful indoor OPV photoactive layers (PALs), is thoroughly investigated. The corresponding thick and semitransparent laminated devices are fabricated entirely in air, by blade and slot-die coating. Their current-voltage (J-V) characteristics show anomalous features depending on the illumination side, with the cathode side generally outperforming the anode counterpart. Electrical and optical modeling reveal that a plausible cause of such a phenomenon is a dead layer that forms at the PAL/anode contact interface that does not contribute to the photocurrent. Said layer becomes undetectable when the PALs are made thin enough (<35 nm each) leading to symmetric J-V curves and improved light utilization efficiency. By screening the photovoltaic performance of multiple donor:acceptor blends, certain all-polymer and polymer:fullerene PALs are identified as adequately symmetric candidates for thick device up-scaling. Finally, ternary blends based on PM6:IO4Cl:fullerene may constitute a viable route to mitigate the electrical asymmetry detected on conventional binary blends.
|
|
| 2. |
- Almora, Osbel, et al.
(författare)
-
Device Performance of Emerging Photovoltaic Materials (Version 1)
- 2020
-
Ingår i: Advanced Energy Materials. - : Wiley. - 1614-6832 .- 1614-6840. ; 11:11
-
Tidskriftsartikel (refereegranskat)abstract
- Emerging photovoltaics (PVs) focus on a variety of applications complementing large scale electricity generation. Organic, dye-sensitized, and some perovskite solar cells are considered in building integration, greenhouses, wearable, and indoor applications, thereby motivating research on flexible, transparent, semitransparent, and multi-junction PVs. Nevertheless, it can be very time consuming to find or develop an up-to-date overview of the state-of-the-art performance for these systems and applications. Two important resources for recording research cells efficiencies are the National Renewable Energy Laboratory chart and the efficiency tables compiled biannually by Martin Green and colleagues. Both publications provide an effective coverage over the established technologies, bridging research and industry. An alternative approach is proposed here summarizing the best reports in the diverse research subjects for emerging PVs. Best performance parameters are provided as a function of the photovoltaic bandgap energy for each technology and application, and are put into perspective using, e.g., the Shockley–Queisser limit. In all cases, the reported data correspond to published and/or properly described certified results, with enough details provided for prospective data reproduction. Additionally, the stability test energy yield is included as an analysis parameter among state-of-the-art emerging PVs.
|
|
| 3. |
- Chen, Xian-Kai, et al.
(författare)
-
A unified description of non-radiative voltage losses in organic solar cells
- 2021
-
Ingår i: Nature Energy. - : Springer Nature. - 2058-7546. ; 6:8, s. 799-806
-
Tidskriftsartikel (refereegranskat)abstract
- Organic solar cells based on non-fullerene acceptors have enabled high efficiencies yet their charge dynamics and its impact on the photovoltaic parameters are not fully understood. Now, Chen et al. provide a general description of non-radiative voltage losses in both fullerene and non-fullerene solar cells. Recent advances in organic solar cells based on non-fullerene acceptors (NFAs) come with reduced non-radiative voltage losses (Delta V-nr). Here we show that, in contrast to the energy-gap-law dependence observed in conventional donor:fullerene blends, the Delta V-nr values in state-of-the-art donor:NFA organic solar cells show no correlation with the energies of charge-transfer electronic states at donor:acceptor interfaces. By combining temperature-dependent electroluminescence experiments and dynamic vibronic simulations, we provide a unified description of Delta V-nr for both fullerene- and NFA-based devices. We highlight the critical role that the thermal population of local exciton states plays in low-Delta V-nr systems. An important finding is that the photoluminescence yield of the pristine materials defines the lower limit of Delta V-nr. We also demonstrate that the reduction in Delta V-nr (for example, <0.2 V) can be obtained without sacrificing charge generation efficiency. Our work suggests designing donor and acceptor materials with high luminescence efficiency and complementary optical absorption bands extending into the near-infrared region.
|
|
| 4. |
- Kirchartz, Thomas, et al.
(författare)
-
Research Update : Recombination and open-circuit voltage in lead-halide perovskites
- 2018
-
Ingår i: APL Materials. - : AIP Publishing. - 2166-532X. ; 6:10
-
Tidskriftsartikel (refereegranskat)abstract
- The high open-circuit voltage and the slow recombination in lead-halide perovskite solar cells has been one of the main contributors to their success as photovoltaic materials. Here, we review the knowledge on recombination in perovskite-based solar cells, compare the situation with silicon solar cells, and introduce the parameters used to describe recombination and open-circuit voltage losses in solar cells. We first discuss the effect of lifetimes and surface recombination velocities on photovoltaic performance before we study the microscopic origin of charge-carrier lifetimes. The lifetimes depend on defect positions and densities and on the kinetic prefactors that control the phonon-assisted interaction between the extended states in the conduction and valence band and the localized defect states. We finally argue that the key to understand the long lifetimes and high open-circuit voltages is a combination of a low density of deep defects and a slow dissipation of energy via multiphonon processes due to the low phonon energies in the lead-halide perovskites.
|
|
| 5. |
- Suchan, Klara, et al.
(författare)
-
Rationalizing Performance Losses of Wide Bandgap Perovskite Solar Cells Evident in Data from the Perovskite Database
-
Ingår i: Advanced Energy Materials. - 1614-6832.
-
Tidskriftsartikel (refereegranskat)abstract
- Metal halide perovskites (MHPs) have become a widely studied class of semiconductors for various optoelectronic devices. The possibility to tune their bandgap (Eg) over a broad spectral range from 1.2 eV to 3 eV by compositional engineering makes them particularly attractive for light emitting devices and multi-junction solar cells. In this metadata study, data from Peer-reviewed publications available in the Perovskite Database (www.perovskitedatabase.com) is used to evaluate the current state of Eg tuning in wide Eg MHP semiconductors. Recent literature on wide Eg MHP semiconductors is examined and the data is extracted and uploaded onto the Perovskite Database. Beyond describing recent highlights and scientific breakthroughs, general trends are drawn from 45,000 individual experimental datasets of MHP solar cell devices. The historical evolution of MHP solar cells is recapitulated, and general conclusions are drawn about the current limits of device performance. Three dominant causes are identified and discussed for the degradation of performance relative to the Shockley-Queisser (SQ) model's theoretical limit for single-junction solar cells: 1) energetically mismatched selective transport materials for wide Eg MHPs, 2) lower optoelectronic quality of wide Eg MHP absorbers, and 3) dynamically evolving compositional heterogeneity due to light-induced phase segregation phenomena.
|
|
| 6. |
- Wang, Yuming, et al.
(författare)
-
Optical Gaps of Organic Solar Cells as a Reference for Comparing Voltage Losses
- 2018
-
Ingår i: Advanced Energy Materials. - : WILEY-V C H VERLAG GMBH. - 1614-6832 .- 1614-6840. ; 8:28
-
Tidskriftsartikel (refereegranskat)abstract
- The voltage loss, determined by the difference between the optical gap (E-g) and the open-circuit voltage (V-OC), is one of the most important parameters determining the performance of organic solar cells (OSCs). However, the variety of different methods used to determine E-g makes it hard to fairly compare voltages losses among different material systems. In this paper, the authors discuss and compare various E-g determination methods and show how they affect the detailed calculation of voltage losses, as well as predictions of the maximum achievable power conversion efficiency. The aim of this paper is to make it possible for the OSC community to compare voltage losses in a consistent and reasonable way. It is found that the voltage losses for strongly absorbed photons in state-of-the-art OSCs are not much less than 0.6 V, which still must be decreased to further enhance efficiency.
|
|
| 7. |
|
|
