| 1. |
- Cohen, Adi, et al.
(författare)
-
Diverging Expressions of Anharmonicity in Halide Perovskites
- 2022
-
Ingår i: Advanced Materials. - : Wiley-V C H Verlag GMBH. - 0935-9648 .- 1521-4095. ; 34:14
-
Tidskriftsartikel (refereegranskat)abstract
- Lead-based halide perovskite crystals are shown to have strongly anharmonic structural dynamics. This behavior is important because it may be the origin of their exceptional photovoltaic properties. The double perovskite, Cs2AgBiBr6, has been recently studied as a lead-free alternative for optoelectronic applications. However, it does not exhibit the excellent photovoltaic activity of the lead-based halide perovskites. Therefore, to explore the correlation between the anharmonic structural dynamics and optoelectronic properties in lead-based halide perovskites, the structural dynamics of Cs2AgBiBr6 are investigated and are compared to its lead-based analog, CsPbBr3. Using temperature-dependent Raman measurements, it is found that both materials are indeed strongly anharmonic. Nonetheless, the expression of their anharmonic behavior is markedly different. Cs2AgBiBr6 has well-defined normal modes throughout the measured temperature range, while CsPbBr3 exhibits a complete breakdown of the normal-mode picture above 200 K. It is suggested that the breakdown of the normal-mode picture implies that the average crystal structure may not be a proper starting point to understand the electronic properties of the crystal. In addition to our main findings, an unreported phase of Cs2AgBiBr6 is also discovered below approximate to 37 K.
|
|
| 2. |
- Ji, Fuxiang, 1991-, et al.
(författare)
-
Remarkable Thermochromism in the Double Perovskite Cs2NaFeCl6
- 2024
-
Ingår i: Advanced Optical Materials. - : John Wiley & Sons. - 2162-7568 .- 2195-1071. ; 12:8
-
Tidskriftsartikel (refereegranskat)abstract
- Lead-free halide double perovskites (HDPs) have emerged as a new generation of thermochromic materials. However, further materials development and mechanistic understanding are required. Here, a highly stable HDP Cs2NaFeCl6 single crystal is synthesized, and its remarkable and fully reversible thermochromism with a wide color variation from light-yellow to black over a temperature range of 10 to 423 K is investigated. First-principles, density functional theory (DFT)-based calculations indicate that the thermochromism in Cs2NaFeCl6 is an effect of electron-phonon coupling. The temperature sensitivity of the bandgap in Cs2NaFeCl6 is up to 2.52 meVK(-1) based on the Varshni equation, which is significantly higher than that of lead halide perovskites and many conventional group-IV, III-V semiconductors. Meanwhile, this material shows excellent environmental, thermal, and thermochromic cycle stability. This work provides valuable insights into HDPs' thermochromism and sheds new light on developing efficient thermochromic materials.
|
|
| 3. |
- Klarbring, Johan, 1989-
(författare)
-
A First-Principles Study of Highly Anharmonic and Dynamically Disordered Solids
- 2020
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- This thesis is a first-principles theoretical investigation of solid materials with high degrees of anharmonicity. These are systems where the dynamics of the constituent atoms is too complex to be well-described by a set of uncoupled harmonic oscillators. While theoretical studies of such systems pose a significant challenge, they are under increasing demand due to the prevalence of these sytems in next-generation technological applications. Indeed, very anharmonic systems are ubiquitous in envisioned materials for future solid-state batteries and fuel-cells, thermoelectrics and optoelectronics. In some of these cases, the anharmonicity is a “side-effect” that simply has to be dealt with in order to accurately model certain properties, while in other cases the anharmonicity is the origin of the high-performance of the material.There are two main parts to the thesis: The first is on materials with perovskite-related structures. This is a very large class of materials, members of which are typically highly anharmonic, not least in relation to a series of complex phase transformations between different structural modifications. In the thesis, I have studied a specific class of such phase-transformations that relate to tilting of the framework of octahedra that make up the structure. The oxide CaMnO3 and a set of inorganic halide perovskites were taken as model systems. The results shed some light on the experimentally observed differences between the local and average atomic structure in these systems. I have further studied Cs2AgBiBr6, a member of the so-called lead-free halide double perovskites. I rationalized its temperature induced phase transformation and found high degrees of anharmonicity and ultra-low thermal conductivity. Finally, I studied the influence of nuclear quantum effects, which are often ignored in computational modelling, on the structure and bonding in the hybrid organic-inorganic lead-halide perovskite, CH3NH3PbI3.The second part of the thesis deals with theoretical studies of the phase stability of dynamically disordered solids. These are solids which have some sort of time-averaged long-range order, characteristic of a crystalline solid, but where the anharmonicity is so strong that the basic concept of an equilibrium atomic position cannot be statically assigned to all atoms. Examples include certain solids with very fast ionic conduction, so called superionics, and solids with rotating molecular units. This absence of equilibrium atomic positions makes many standard computational techniques to evaluate phase-stability inapplicable. I outline a method to deal with this issue, which is based on a stress-strain thermodynamic integration on a deformation path from an ordered variant to the dynamically disordered phase itself. I apply the method to study the phase stability of the high-temperature δ-phase of Bi2O3, which is the fastest know solid oxide ion conductor, and to Li2C2, whose high temperature cubic phase contains rotating C2 dimers.The thesis exemplifies the need to go beyond many of the standard approximations used in first-principles computational materials science if accurate theoretical predictions are to be made. This is true, in particular, for many emerging material classes in the field of energy materials.
|
|
| 4. |
- Knoop, Florian, et al.
(författare)
-
TDEP:Temperature Dependent Effective Potentials
- 2024
-
Ingår i: Journal of Open Source Software. - : Open journals. - 2475-9066. ; 9:94
-
Tidskriftsartikel (refereegranskat)abstract
- The Temperature Dependent Effective Potential (TDEP) method is a versatile and efficient approach to include temperature in a binitio materials simulations based on phonon theory. TDEP can be used to describe thermodynamic properties in classical and quantum ensembles, and several response properties ranging from thermal transport to Neutron and Raman spectroscopy. A stable and fast reference implementation is given in the software package of the same name described here. The underlying theoretical framework and foundation is briefly sketched with an emphasis on discerning the conceptual difference between bare and effective phonon theory, in both self-consistent and non-self-consistent formulations. References to numerous applications and more in-depth discussions of the theory are given.
|
|
| 5. |
- Mopoung, Kunpot, et al.
(författare)
-
Understanding Antiferromagnetic Coupling in Lead-Free Halide Double Perovskite Semiconductors
- 2024
-
Ingår i: The Journal of Physical Chemistry C. - : AMER CHEMICAL SOC. - 1932-7447 .- 1932-7455. ; 128:12, s. 5313-5320
-
Tidskriftsartikel (refereegranskat)abstract
- Solution-processable semiconductors with antiferromagnetic (AFM) order are attractive for future spintronics and information storage technology. Halide perovskites containing magnetic ions have emerged as multifunctional materials, demonstrating a cross-link between structural, optical, electrical, and magnetic properties. However, stable optoelectronic halide perovskites that are antiferromagnetic remain sparse, and the critical design rules to optimize magnetic coupling still must be developed. Here, we combine the complementary magnetometry and electron-spin-resonance experiments, together with first-principles calculations to study the antiferromagnetic coupling in stable Cs-2(Ag:Na)FeCl6 bulk semiconductor alloys grown by the hydrothermal method. We show the importance of nonmagnetic monovalence ions at the B-I site (Na/Ag) in facilitating the superexchange interaction via orbital hybridization, offering the tunability of the Curie-Weiss parameters between -27 and -210 K, with a potential to promote magnetic frustration via alloying the nonmagnetic B-I site (Ag:Na ratio). Combining our experimental evidence with first-principles calculations, we draw a cohesive picture of the material design for B-site-ordered antiferromagnetic halide double perovskites.
|
|
| 6. |
- Yuan, Fanglong, et al.
(författare)
-
Bright and stable near-infrared lead-free perovskite light-emitting diodes
- 2024
-
Ingår i: Nature Photonics. - : NATURE PORTFOLIO. - 1749-4885 .- 1749-4893. ; 18, s. 170-176
-
Tidskriftsartikel (refereegranskat)abstract
- Long-wavelength near-infrared light-emitting diodes (NIR LEDs) with peak emission wavelengths beyond 900 nm are of critical importance for various applications including night vision, biomedical imaging, sensing and optical communications. However, the low radiance and poor operational stability of state-of-the-art long-wavelength NIR LEDs based on soft materials remain the most critical factors limiting their practical applications. Here we develop NIR LEDs emitting beyond 900 nm with improved performance through the rational manipulation of p doping in all-inorganic tin perovskites (CsSnI3) by retarding and controlling the crystallization process of perovskite precursors in tin-rich conditions. The resulting NIR LEDs exhibit a peak emission wavelength at 948 nm, high radiance of 226 W sr-1 m-2 and long operational half-lifetime of 39.5 h at a high constant current density of 100 mA cm-2. Our demonstration of efficient and stable NIR LEDs operating at high current densities may also open up new opportunities towards electrically pumped lasers. Controlling the intrinsic doping of lead-free perovskites enables near-infrared LEDs emitting at 948 nm with a peak radiance of 226 W sr-1 m-2 and a half-lifetime of 39.5 h.
|
|
