| 1. |
- Aartsen, M. G., et al.
(författare)
-
The IceCube Neutrino Observatory : instrumentation and online systems
- 2017
-
Ingår i: Journal of Instrumentation. - : IOP PUBLISHING LTD. - 1748-0221. ; 12
-
Tidskriftsartikel (refereegranskat)abstract
- The IceCube Neutrino Observatory is a cubic-kilometer-scale high-energy neutrino detector built into the ice at the South Pole. Construction of IceCube, the largest neutrino detector built to date, was completed in 2011 and enabled the discovery of high-energy astrophysical neutrinos. We describe here the design, production, and calibration of the IceCube digital optical module (DOM), the cable systems, computing hardware, and our methodology for drilling and deployment. We also describe the online triggering and data filtering systems that select candidate neutrino and cosmic ray events for analysis. Due to a rigorous pre-deployment protocol, 98.4% of the DOMs in the deep ice are operating and collecting data. IceCube routinely achieves a detector uptime of 99% by emphasizing software stability and monitoring. Detector operations have been stable since construction was completed, and the detector is expected to operate at least until the end of the next decade.
|
|
| 2. |
- Arino, I., et al.
(författare)
-
On the relation between surface texture and gloss of injection-molded pigmented plastics
- 2005
-
Ingår i: Polymer Engineering and Science. - : Wiley. - 0032-3888 .- 1548-2634. ; 45:10, s. 1343-1356
-
Tidskriftsartikel (refereegranskat)abstract
- The relation between the surface topography of injection-molded plastic objects with deliberately imposed textures and their gloss, measured by means of a conventional glossmeter at incident angles of 20 degrees, 60 degrees and 85 degrees, was investigated. A modification of the general scalar Kirchhoff approximation, which accounts for geometrical features of the glossmeter, is used to describe the experimental gloss values of the textured surfaces. The agreement between the measured and the calculated values for incidence angles of 20 degrees and 60 degrees confirms the usefulness of the approach, though several of the textured surfaces used here are too rough for the Kirchhoff theory to be strictly valid. A poorer agreement, however, was noted at higher incidence angles (85 degrees in this case). For very smooth surfaces (without any texture), the classical Bennett-Porteus theory could in many cases describe the gloss level with sufficient accuracy. The influence on the measured gloss of the polymer material (in terms of its refractive index) and the color of the injection-molded object is also discussed. Light beige specimens in three different polymeric materials (acrylonitrile-butadiene-styrene, acrylonitrile-butadiene-styrene/polycarbonate blend, and polypropylene) as well as three acrylonitrile-butadiene-styrene products with different colors were used. The refractive index of the polymer had no major influence on the measured gloss. The gloss level increased slightly with increasing lightness of the specimens, which can be associated with an increased contribution from the bulk scattering. However, the surface texture governed most of the gloss variations.
|
|
| 3. |
|
|
| 4. |
|
|
