1. |
- David, Romain, et al.
(författare)
-
Converging on a Semantic Interoperability Framework for the European Data Space for Science, Research and Innovation (EOSC)
- 2023
-
Konferensbidrag (refereegranskat)abstract
- Semantic interoperability (SI) is at the heart of the FAIR principles and of the design of large scale cross disciplinary infrastructures. The European Open Science Cloud (EOSC) is a European-wide effort towards such an infrastructure, aiming to deepen the regional research collaboration and realising a shared data space for science, research and innovation. In this context, the research community’s voice is represented by the EOSC Association (EOSC-A) and a number of advisory groups with a broad range of representatives from different stakeholder organisations. The advisory group on metadata and data quality has formed a task force focusing on developing and implementing recommendations for SI (EOSC SI Task Force) with the ambition to converge on globally relevant and scalable SI solutions for EOSC. This paper provides context to SI in EOSC, the various components contributing to it, as well as some views on the socio-technical challenges to arriving at a consensus. In particular, the paper provides motivation for exploring the heterogeneity of SI solutions demonstrated across scientific communities and insight into the task force’s planned approach to conduct a survey to identify relevant components and structures. The paper is also an invitation to the global community to align and engage with the task force’s activities going forward.
|
|
2. |
|
|
3. |
- Honorato, Camila, et al.
(författare)
-
Transparent nanocellulose-pigment composite films
- 2015
-
Ingår i: Journal of Materials Science. - : Springer Science and Business Media LLC. - 0022-2461 .- 1573-4803. ; 50:22, s. 7343-7352
-
Tidskriftsartikel (refereegranskat)abstract
- Biodegradable coatings and films of cellulose nanofibers (CNFs) or a combination of CNFs and inorganic fillers, such as clay or calcium carbonate (CaCO3), can provide a replacement for non-biodegradable plastic coatings as barrier layers in packaging boards. In this work, transparent composite films were prepared from CNFs of Pinus radiata and Eucalyptus using different amounts of clay and CaCO3 as fillers. The impact of raw material (softwood vs. hardwood), TEMPO oxidation levels and filler type (clay vs. CaCO3) on film properties was studied. Pinus radiata CNF films had superior mechanical properties to Eucalyptus CNF films, but no significant differences were observed in the barrier and optical properties. Clay seemed to work better as filler compared to CaCO3, in terms of its impact on film properties. Composite films with CaCO3 as filler were highly brittle with inferior properties to clay-CNF films, and an uneven distribution and agglomeration of the CaCO3 mineral particles was evident in SEM images. Based on the results, clay as filler in CNF coatings is preferred for targeting packaging board applications. Rheological characterisation of the CNF suspensions revealed shear-thinning behaviour, with the CNF from Eucalyptus having higher viscosities and lower power-law indices when compared to the CNF from P. radiata.
|
|
4. |
- Koivula, Hanna, et al.
(författare)
-
Temperature and moisture effects on wetting of calcite surfaces by offset ink constituents
- 2011
-
Ingår i: Colloids and Surfaces A. - : Elsevier. - 0927-7757 .- 1873-4359. ; 390, s. 105-111
-
Tidskriftsartikel (refereegranskat)abstract
- Offset printability is influenced by interactions between ink constituents: linseed oil, mineral oil and water (fountain solution), with the mineral surfaces of paper coatings. To exclude complications of the porous structure effects, the influence of temperature and moisture on wetting by offset ink model liquids were studied on cleaved optical calcite surfaces with and without sodium polyacrylate dispersant. Contact angle measurement was chosen as the method of analysis. The results show that a moderate temperature increase from 25 °C to 60 °C, which might occur in the process, does not affect the wetting of these surfaces by mineral oil. Water and linseed oil are affected by the transport of moisture at the surfaces as an indirect consequence of temperature increase. The linseed oil behavior was found to be sensitive to polarity changes of the surfaces.
|
|
5. |
- Rivière, Guillaume N., et al.
(författare)
-
Toward waste valorization by converting bioethanol production residues into nanoparticles and nanocomposite films
- 2021
-
Ingår i: Sustainable Materials and Technologies. - : Elsevier BV. - 2214-9937. ; 28
-
Tidskriftsartikel (refereegranskat)abstract
- A “waste-valorization” approach was developed to transform recalcitrant hydrolysis lignin (HL) from second-generation bioethanol production into multifunctional bio-based products. The hydrolysis lignin (HL) was extracted with aqueous acetone, yielding two fractions enriched in lignin and cellulose, respectively. The soluble hydrolysis lignin (SHL) was converted into anionic and cationic colloidal lignin particles (CLPs and c-CLPs). The insoluble cellulose-rich fraction was transformed into lignocellulosic nanofibrils that were further combined with CLPs or c-CLPs to obtain nanocomposite films with tailored mechanical properties, oxygen permeability and antioxidant properties. To enable prospective applications of lignin in nanocomposite films and beyond, CLPs and c-CLPs were also produced from a soda lignin (SL) and the influence of the lignin type on the particle size and ecotoxicity was evaluated. Finally, the carbon footprint of the entire process from hydrolysis lignin to films was assessed and an integration to industrial scale was considered to reduce the energy consumption. While most previous work utilizes purified lignin and pristine and often purified cellulose fibers to produce nanomaterials, this work provides a proof of concept for utilizing the recalcitrant lignin-rich side stream of the bioethanol process as raw material for functional nanomaterials and renewable composites.
|
|
6. |
|
|