| 1. |
- Antzutkin, Oleg, et al.
(författare)
-
Optically dectected ESR (OD-ESR) of iron-radical pairs in colored solutions : observation of transient trans-Azobenzene radical cation
- 1993
-
Ingår i: Applied Magnetic Resonance. - : Springer- Verlag. - 0937-9347 .- 1613-7507. ; 5:1, s. 77-86
-
Tidskriftsartikel (refereegranskat)abstract
- Trans-azobenzene dissolved in different liquid hydrocarbons absorbs fluorescence arising from all acceptors previously used in Fluorescence Detected Magnetic Resonance (FDMR) and Optically Detected ESR (OD ESR) spectroscopy making optical detection impossible. In this report a new acceptor, rubrene, having sufficient quantum yield of fluorescence in the red band 550-620 nm, has been proven successful. OD ESR spectra of the radical-ion pair trans-azobenzene+/rubrene- were detected in liquid squalane (2,6,10,15,19,23-hexamethyl-tetracosane) solution in the temperature range 294-243 K. The experimental isotropic hyperfine splittings of the radical cation of trans-azobenzene (a(N) = 1.4 mT) have been compared with those from MNDO/INDO calculations and with those of earlier work using freon matrix studies.
|
|
| 2. |
- Botero Vega, Carlos Alberto, et al.
(författare)
-
Additive Manufacturing of a Cold-Work Tool Steel using Electron Beam Melting
- 2020
-
Ingår i: Steel Research International. - : Wiley. - 1611-3683 .- 1869-344X. ; 19:5, s. 1-6
-
Tidskriftsartikel (refereegranskat)abstract
- Metal additive manufacturing (AM) is on its way to industrialization. One of the most promising techniques within this field, electron beam melting (EBM), is nowadays used mostly for the fabrication of high‐performance Ti‐based alloy components for the aerospace and medical industry. Among the industrial applications envisioned for the future of EBM, the fabrication of high carbon steels for the tooling industry is of great interest. In this context, the process windows for dense and crack‐free specimens for a highly alloyed (Cr–Mo–V) cold‐work steel powder are presented in this article. High‐solidification rates during EBM processing lead to very fine and homogeneous microstructures. The influence of process parameters on the resulting microstructure and the chemical composition is investigated. In addition, preliminary results show very promising mechanical properties regarding the as‐built and heat‐treated microstructure of the obtained material.
|
|
| 3. |
|
|
| 4. |
- Carle, Fredrik, et al.
(författare)
-
Portable rescue device and a method for locating such a device
- 2007
-
Patent (populärvet., debatt m.m.)abstract
- A portable rescue device and a method for locating, by means of a first rescue device set in a search mode, a second rescue device set in a distress mode. In the method, a distress signal carrying a device identification is received from said second rescue device. A first bearing and a second bearing to the second rescue device are obtained. The first and second bearings are taken from a first and a second position, respectively. A distance between these positions is determined. A current distance and a current bearing to the second rescue device are determined on basis of the first and second bearings and the distance. The current bearing and the current distance are communicated to a user of the first rescue device. The portable rescue device is used for performing the method and for that purpose it includes a first communication unit for distress signal transmission and reception; a compass; a processor; a user interface; and a mode switch for switching between a search mode and a distress signal mode. The first communication device has an antenna structure that provides directional capability.
|
|
| 5. |
- Chudinova, Ekaterina A., et al.
(författare)
-
Adhesion, proliferation, and osteogenic differentiation of human mesenchymal stem cells on additively manufactured Ti6Al4V alloy scaffolds modified with calcium phosphate nanoparticles
- 2019
-
Ingår i: Colloids and Surfaces B. - : Elsevier BV. - 0927-7765 .- 1873-4367. ; 176, s. 130-139
-
Tidskriftsartikel (refereegranskat)abstract
- In the present study, biocomposites based on 3D porous additively manufactured Ti6Al4V (Ti64) scaffolds modified with biocompatible calcium phosphate nanoparticles (CaPNPs) were investigated. Ti64 scaffolds were manufactured via electron beam melting technology using an Arcam machine. Electrophoretic deposition was used to modify the scaffolds with CaPNPs, which were synthesized by precipitation in the presence of polyethyleneimine (PEI). Dynamic light scattering revealed that the CaP/PEI nanoparticles had an average size of 46 ± 18 nm and a zeta potential of +22 ± 9 mV. Scanning electron microscopy (SEM) revealed that the obtained spherical CaPNPs had an average diameter of approximately 90 nm. The titanium-based scaffolds coated with CaPNPs exhibited improved hydrophilic surface properties, with a water contact angle below 5°. Cultivation of human mesenchymal stem cells (hMSCs) on the CaPNPs-coated Ti64 scaffolds indicated that the improved hydrophilicity was beneficial for the attachment and growth of cells in vitro. The Ti6Al4V/CaPNPs scaffold supported an increase in the alkaline phosphatase (ALP) activity of cells. In addition to the favourable cell proliferation and differentiation, Ti6Al4V/CaPNPs scaffolds displayed increased mineralization compared to non-coated Ti6Al4V scaffolds. Thus, the developed composite 3D scaffolds of Ti6Al4V functionalized with CaPNPs are promising materials for different applications related to bone repair.
|
|
| 6. |
- Chudinova, Ekaterina, et al.
(författare)
-
Additive manufactured Ti6Al4V scaffolds with the RF-magnetron sputter deposited hydroxyapatite coating
- 2016
-
Ingår i: Journal of Physics: Conference Series. - : Institute of Physics Publishing (IOPP). - 1742-6588 .- 1742-6596.
-
Konferensbidrag (refereegranskat)abstract
- Present paper reports on the results of surface modification of the additively manufactured porous Ti6Al4V scaffolds. Radio frequency (RF) magnetron sputtering was used to modify the surface of the alloy via deposition of the biocompatible hydroxyapatite (HA) coating. The surface morphology, chemical and phase composition of the HA-coated alloy were studied. It was revealed that RF magnetron sputtering allows preparing a homogeneous HA coating onto the entire surface of scaffolds.
|
|
| 7. |
- Chudinova, E., et al.
(författare)
-
Determination of the properties and loading efficiency of encapsulated BSA-FITC and dexamethasone for drug delivery systems
- 2019
-
Ingår i: IOP Conference Series. - : Institute of Physics Publishing (IOPP).
-
Konferensbidrag (refereegranskat)abstract
- In this work porous microparticles of calcium carbonate were synthesized with bovine serum albumin - fluorescein isothiocyanate conjugate (BSA-FITC) and dexamethasone, and then used for encapsulation in polymer microcapsules by means of layer-by-layer assembly (LbL). The properties of the obtained microcapsules were characterized by scanning electron microscopy, dynamic light scattering, infrared-, ultraviolet- and visible spectroscopy. According to the performed DLS measurements, an average hydrodynamic diameter ranged from 4 to 8 m and zeta-potential for all types of capsules was determined as -18 and -21 mV. BSA-FITC was encapsulated using this approach yielded a loading efficiency of 49 % protein. This value calculated for dexamethasone was of 38%. The microcapsules filled with an encapsulated drug may find applications in the field of biotechnology, biochemistry, and medicine.
|
|
| 8. |
- Chudinova, E., et al.
(författare)
-
Surface modification of Ti6Al4V alloy scaffolds manufactured by electron beam melting
- 2019
-
Konferensbidrag (refereegranskat)abstract
- In this paper, the results of the surface functionalization of the Ti6Al4V alloy scaffolds with different structures for use as a material for medical implants are presented. Radio frequency magnetron sputtering was used to modify the surface of the porous structures by deposition of the biocompatible hydroxyapatite (HA) coating with the thickness of 86050 nm. The surface morphology, elemental and phase composition of the HA-coated scaffolds were studied. According to energy-dispersive X-ray spectroscopy, the stoichiometric ratio of Ca/P for flat, orthorhombic and cubic scaffolds is 1.65, 1.60, 1.53, respectively, which is close to that of stoichiometric ratio for HA (Ca/P = 1.67). It was revealed that this method of deposition makes it possible to obtain the homogeneous crystalline coating both on the dense sample and in the case of scaffolds of complex geometry with different lattice cell structure.
|
|
| 9. |
- Douglas, Timothy E. L., et al.
(författare)
-
Pectin coatings on titanium alloy scaffolds produced by additive manufacturing : Promotion of human bone marrow stromal cell proliferation
- 2018
-
Ingår i: Materials letters (General ed.). - : Elsevier BV. - 0167-577X .- 1873-4979. ; 227, s. 225-228
-
Tidskriftsartikel (refereegranskat)abstract
- Ti6Al4V is a popular biomaterial for load-bearing implants for bone contact, which can be fabricated by additive manufacturing technologies. Their long-term success depends on their stable anchoring in surrounding bone, which in turn depends on formation of new bone tissue on the implant surface, for which adhesion and proliferation of bone-forming cells is a pre-requisite. Hence, surface coatings which promote cell adhesion and proliferation are desirable. Here, Ti6Al4V discs prepared by additive manufacturing (EBM) were coated with layers of pectins, calcium-binding polysaccharides derived from citrus (C) and apple (A), which also contained alkaline phosphatase (ALP), the enzyme responsible for mineralization of bone tissue. Adhesion and proliferation of human bone marrow stromal cells (hBMSC) were assessed. Proliferation after 7 days was increased by A-ALP coatings and, in particular, by C-ALP coatings. Cell morphology was similar on coated and uncoated samples. In conclusion, ALP-loaded pectin coatings promote hBMSC adhesion and proliferation.
|
|
| 10. |
|
|
