| 1. |
-
- 2019
-
Tidskriftsartikel (refereegranskat)
|
|
| 2. |
- Berglund, Martin, 1985-, et al.
(författare)
-
Dynamic characterization and modelling of a dual-axis beam steering device for performance understanding, optimization, and control design
- 2013
-
Ingår i: Journal of Micromechanics and Microengineering. - : IOP Publishing. - 0960-1317 .- 1361-6439. ; 23:4, s. 045020-
-
Tidskriftsartikel (refereegranskat)abstract
- This paper presents a lumped thermal model of a dual-axis laser micromirror device for beam steering in a free-space optical (FSO) communication system, designed for fractionated spacecraft. An FSO communication system provides several advantages, such as larger bandwidth, smaller size and weight of the communication payload and less power consumption. A dual-axis mirror device is designed and realized using microelectromechanical systems technology. The fabrication is based on a double-sided, bulk micromachining process, where the mirror actuates thermally by joints consisting of v-grooves filled with the SU-8 polymer. The size of the device, consisting of a mirror, which is deflectable versus its frame in one direction, and through deflection of the frame in the other, is 15.4 × 10.4 × 0.3 mm3. In order to further characterize and understand the micromirror device, a Simulink state-space model of the actuator is set up using thermal and mechanical properties from a realized actuator. A deviation of less than 2% between the modelled and measured devices was obtained in an actuating temperature range of 20–200 °C. The model of the physical device was examined by evaluating its performance in vacuum, and by changing physical parameters, such as thickness and material composition. By this, design parameters were evaluated for performance gain and usability. For example, the crosstalk between the two actuators deflecting the mirror along its two axes in atmospheric pressure is projected to go down from 97% to 6% when changing the frame material from silicon to silicon dioxide. A feedback control system was also designed around the model in order to examine the possibility to make a robust control system for the physical device. In conclusion, the model of the actuator presented in this paper can be used for further understanding and development of the actuator system.
|
|
| 3. |
- Berglund, Martin, 1985-, et al.
(författare)
-
Microfluidics integrable plasma source powered by a silicon through-substrate split-ring resonator
- 2013
-
Ingår i: Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS EUROSENSORS XXVII). ; , s. 2608-2611
-
Konferensbidrag (övrigt vetenskapligt/konstnärligt)abstract
- A novel microplasma source, based on a microstrip split-ring resonator design with electrodes integrated in its silicon substrate, was designed, manufactured and evaluated. This device should offer straightforward integration with other MEMS components, and has a plasma discharge gap with a controlled volume and geometry, with potential for microfluidics. Two realized devices were resonant at around 2.9 GHz with quality factors of 26.6 and 18.7. Two different plasma ignition modes were observed, where the plasma at low pressures was not confined to the gap but rather appeared between the ends of the electrodes on the backside.
|
|
| 4. |
- Bruhn, Fredrik, et al.
(författare)
-
A Preliminary Design for a Spherical Inflatable Microrover for Planetary Exploration
- 2008
-
Ingår i: Acta Astronautica. - : Elsevier BV. - 0094-5765 .- 1879-2030. ; 63:5-6, s. 618-631
-
Tidskriftsartikel (refereegranskat)abstract
- The Spherical Mobile Investigator for Planetary Surface (SMIPS) concept aims at making use of the latest developments within extreme miniaturization of space systems. The introduction of Microelectromechanical Systems (MEMSs) and higher level Multifunctional Microsystems (MMSs) design solutions gives the robot high performance per weight unit. The untraditional spherical shape makes it easily maneuverable and thus provides a platform for scientific investigations of interplanetary bodies. Preliminary investigations of the SMIPS concept show several advantages over conventional robots and rovers in maneuverability, coverage, size, and mass. A locomotion proof-of-concept has been Studied together with a new distributed on-board data system configuration. This paper discusses theoretical robot analysis, an overall concept, possible science, enabling technologies, and how to perform scientific investigations. A preliminary design of an inflatable multifunctional shell is proposed.
|
|
| 5. |
|
|
| 6. |
- Böhnke, Tobias, et al.
(författare)
-
Surfaces with high solar reflectance and high thermal emittance on structured silicon for spacecraft thermal control
- 2008
-
Ingår i: Optical materials (Amsterdam). - : Elsevier BV. - 0925-3467 .- 1873-1252. ; 30:9, s. 1410-1421
-
Tidskriftsartikel (refereegranskat)abstract
- Presented here is an examination of unstructured and structured (by anisotropic etching), monocrystalline silicon wafers coated with sputter deposited aluminum and chemical vapor deposited silicon dioxide for high solar reflectance and high thermal emittance, respectively. The topography of the samples was characterized with optical and scanning electron microscopy. Optical properties were examined with reflectance and transmittance spectroscopy, partly by usage of an integrating sphere. The measurement results were used to estimate the equilibrium temperature of the surfaces in space. The suitability of the surfaces with high solar reflectance and high thermal emittance to aid in the thermal control of miniaturized, highly integrated components for space applications is discussed. A silicon dioxide layer on a metal layer results in a slightly lower reflectance when compared to surfaces with only a metal layer, but might be beneficial for miniaturized space components and modules that have to dissipate internally generated heat into open space. Additionally, it is an advantage to microstructure the emitting surface for enhanced radiation of excess heat.
|
|
| 7. |
- Cheng, Shi, et al.
(författare)
-
79 GHz Slot Antennas Based on Substrate Integrated Waveguides (SIW) in a Flexible Printed Circuit Board
- 2009
-
Ingår i: IEEE Transactions on Antennas and Propagation. - 0018-926X .- 1558-2221. ; 57:1, s. 64-71
-
Tidskriftsartikel (refereegranskat)abstract
- The design, fabrication and characterization of 79 GHz slot antennas based on substrate integrated waveguides (SIW) are presented in this paper. All the prototypes are fabricated in a polyimide flex foil using printed circuit board (PCB) fabrication processes. A novel concept is used to minimize the leakage losses of the SlWs at millimeter wave frequencies. Different losses in the SlWs are analyzed. SIW-based single slot antenna, longitudinal and four-by-four slot array antennas are numerically and experimentally studied. Measurements of the antennas show approximately 4.7%, 5.4% and 10.7% impedance bandwidth (S-11 = -10 dB) with 2.8 dBi, 6.0 dBi and 11.0 dBi maximum antenna gain around 79 GHz, respectively. The measured results are in good agreement with the numerical simulations.
|
|
| 8. |
- Hansen, C. J., et al.
(författare)
-
Silver and palladium help unveil the nature of a second r-process
- 2012
-
Ingår i: Astronomy & Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 545
-
Tidskriftsartikel (refereegranskat)abstract
- Context. The rapid neutron-capture process, which created about half of the heaviest elements in the solar system, is believed to have been unique. Many recent studies have shown that this uniqueness is not true for the formation of lighter elements, in particular those in the atomic number range 38 < Z < 48. Among these, palladium (Pd) and especially silver (Ag) are expected to be key indicators of a possible second r-process, but until recently they have been studied only in a few stars. We therefore target Pd and Ag in a large sample of stars and compare these abundances to those of Sr, Y, Zr, Ba, and Eu produced by the slow (s-) and rapid (r-) neutron-capture processes. Hereby we investigate the nature of the formation process of Ag and Pd. Aims. We study the abundances of seven elements (Sr, Y, Zr, Pd, Ag, Ba, and Eu) to gain insight into the formation process of the elements and explore in depth the nature of the second r-process. Methods. By adopting a homogeneous one-dimensional local thermodynamic equilibrium (1D LTE) analysis of 71 stars, we derive stellar abundances using the spectral synthesis code MOOG, and the MARCS model atmospheres. We calculate abundance ratio trends and compare the derived abundances to site-dependent yield predictions (low-mass O-Ne-Mg core-collapse supernovae and parametrised high-entropy winds), to extract characteristics of the second r-process. Results. The seven elements are tracers of different (neutron-capture) processes, which in turn allows us to constrain the formation process(es) of Pd and Ag. The abundance ratios of the heavy elements are found to be correlated and anti-correlated. These trends lead to clear indications that a second/weak r-process, is responsible for the formation of Pd and Ag. On the basis of the comparison to the model predictions, we find that the conditions under which this process takes place differ from those for the main r-process in needing lower neutron number densities, lower neutron-to-seed ratios, and lower entropies, and/or higher electron abundances. Conclusions. Our analysis confirms that Pd and Ag form via a rapid neutron-capture process that differs from the main r-process, the main and weak s- processes, and charged particle freeze-outs. We find that this process is efficiently working down to the lowest metallicity sampled by our analysis ([Fe/H] = -3.3). Our results may indicate that a combination of these explosive sites is needed to explain the variety in the observationally derived abundance patterns.
|
|
| 9. |
|
|
| 10. |
- Janhunen, Pekka, et al.
(författare)
-
Electric Solar Wind Sail in tailwind
- 2011
-
Ingår i: EPSC-DPS Joint Meeting 2011.
-
Konferensbidrag (refereegranskat)abstract
- The Electric Solar Wind Sail (E-sail) is a novelpropulsion concept that enables faster space travel tomany solar system targets. E-sail uses charged solarwind particles as the source of its propulsion. This isachieved by deploying long, conducting and chargedtethers, which get pushed by the solar wind byCoulomb drag [1].E-sail technology is being developed to technicalreadiness level (TRL) 4-5 by the European Union’sSeventh Framework Programme for Research andTechnological Development, EU FP7, in a projectnamed ESAIL (http://www.electric-sailing.fi/fp7).Prototypes of the key parts are to be produced. Thedesign will be scalable so that a real solar winddemonstration mission could be scaled up from them.We review here the latest results of the constantlyevolving E-sail project.
|
|
