| 1. |
- Edelbro, Catrin, et al.
(författare)
-
Engaging with Program Stakeholders to Support Program Development
- 2017
-
Ingår i: The 13th International CDIO Conference Proceedings - Full Papers. - Calgary.
-
Konferensbidrag (refereegranskat)abstract
- Luleå University of Technology (LTU) has adopted CDIO as the framework for developing its engineering programs. At the Department of Civil, Environmental and Natural Resources Engineering, there are two programs focusing on tunnelling, mining and rock excavation. Despite very positive prospects for professionals in the field, the number of students has decreased for the last two years. Further, program content might not reflect recent developments or new requirements in the industry. Therefore, the programs and their courses are taken under renewed consideration. Given the nature of the challenges facing the programs, it is in this case particularly important to inform of the planned development through a dialogue with stakeholders. Stakeholder dialogue is also a key feature of a CDIO curriculum development (CDIO Standard 2). This paper reports on a process of engagement with industry representatives, initiated through a meeting to discuss the competence of newly graduated from LTU as well as the future needs in the industry. The input will make it more visible what programme and course development work needs to be done in the nearest future. A continued support and feedback from the industry is warranted during the programme development.
|
|
| 2. |
- Ahlberg Tidblad, Annika, et al.
(författare)
-
Future Material Developments for Electric Vehicle Battery Cells Answering Growing Demands from an End-User Perspective
- 2021
-
Ingår i: Energies. - : MDPI. - 1996-1073. ; 14:14
-
Forskningsöversikt (refereegranskat)abstract
- Nowadays, batteries for electric vehicles are expected to have a high energy density, allow fast charging and maintain long cycle life, while providing affordable traction, and complying with stringent safety and environmental standards. Extensive research on novel materials at cell level is hence needed for the continuous improvement of the batteries coupled towards achieving these requirements. This article firstly delves into future developments in electric vehicles from a technology perspective, and the perspective of changing end-user demands. After these end-user needs are defined, their translation into future battery requirements is described. A detailed review of expected material developments follows, to address these dynamic and changing needs. Developments on anodes, cathodes, electrolyte and cell level will be discussed. Finally, a special section will discuss the safety aspects with these increasing end-user demands and how to overcome these issues.
|
|
| 3. |
- Ahlgren, Per, 1960-, et al.
(författare)
-
A bibliometric analysis of battery research with the BATTERY 2030+ roadmap as point of departure
- 2022
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- In this bibliometric study, we analyze the six battery research subfields identified in the BATTERY 2030+ roadmap: Battery Interface Genome, Materials Acceleration Platform, Recyclability, Smart functionalities: Self-healing, Smart functionalities: Sensing, and Manufacturability. In addition, we analyze the entire research field related to BATTERY 2030+ as a whole, using two operationalizations. We (a) evaluate the European standing in the subfields/the BATTERY 2030+ field in comparison to the rest of the world, and (b) identify strongholds of the subfields/the BATTERY 2030+ field across Europe. For each subfield and the field as a whole, we used seed articles, i.e. articles listed in the BATTERY 2030+ roadmap or cited by such articles, in order to generate additional, similar articles located in an algorithmically obtained classification system. The output of the analysis is publication volumes, field normalized citation impact values with comparisons between country/country aggregates and between organizations, co-publishing networks between countries and organizations, and keyword co-occurrence networks. For the results related to (a), the performance of EU & associated (countries) is similar to China and the aggregate Japan-South Korea-Singapore and well below North America regarding citation impact and with respect to the field as a whole. Exceptions are, however, the subfields Battery Interface Genome and Recyclability. For the results related to (b), there is a large variability in the EU & associated organizations regarding volume in the different subfields. For citation impact, examples of high-performing EU & associated organizations are ETH Zurich and Max Planck Society for the Advancement of Science.
|
|
| 4. |
- Ahlgren, Per, 1960-, et al.
(författare)
-
BATTERY 2030+ and its Research Roadmap : A Bibliometric Analysis.
- 2023
-
Ingår i: ChemSusChem. - : Wiley. - 1864-5631 .- 1864-564X. ; 16:21
-
Tidskriftsartikel (refereegranskat)abstract
- In this bibliometric study, we analyze two of the six battery research subfields identified in the BATTERY 2030+ roadmap: Materials Acceleration Platform and Smart functionalities: Sensing. In addition, we analyze the entire research field related to BATTERY 2030+ as a whole. We (a) evaluate the European standing in the two subfields/the BATTERY 2030+ field in comparison to the rest of the world, and (b) identify strongholds of the two subfields/the BATTERY 2030+ field across Europe. For each subfield and the field as a whole, we used seed articles, i. e. articles listed in the BATTERY 2030+ roadmap or cited by such articles, in order to generate additional, similar articles located in an algorithmically obtained classification system. The output of the analysis is publication volumes, field normalized citation impact values with comparisons between country/country aggregates and between organizations, co-publishing networks between countries and organizations, and keyword co-occurrence networks.
|
|
| 5. |
- Aktekin, Burak, et al.
(författare)
-
Cation Ordering and Oxygen Release in LiNi0.5-xMn1.5+xO4-y (LNMO) : In Situ Neutron Diffraction and Performance in Li Ion Full Cells
- 2019
-
Ingår i: ACS Applied Energy Materials. - : AMER CHEMICAL SOC. - 2574-0962. ; 2:5, s. 3323-3335
-
Tidskriftsartikel (refereegranskat)abstract
- Lithium ion cells utilizing LiNi0.5Mn1.5O4 (LNMO) as the positive electrode are prone to fast capacity fading, especially when operated in full cells and at elevated temperatures. The crystal structure of LNMO can adopt a P4(3)32 (cation-ordered) or Fd (3) over barm (disordered) arrangement, and the fading rate of cells is usually mitigated when samples possess the latter structure. However, synthesis conditions leading to disordering also lead to oxygen deficiencies and rock-salt impurities and as a result generate Mn3+. In this study, in situ neutron diffraction was performed on disordered and slightly Mn-rich LNMO samples to follow cation ordering-disordering transformations during heating and cooling. The study shows for the first time that there is not a direct connection between oxygen release and cation disordering, as cation disordering is observed to start prior to oxygen release when the samples are heated in a pure oxygen atmosphere. This result demonstrates that it is possible to tune disordering in LNMO without inducing oxygen deficiencies or forming the rock-salt impurity phase. In the second part of the study, electrochemical testing of samples with different degrees of ordering and oxygen content has been performed in LNMO vertical bar vertical bar LTO (Li4Ti5O12) full cells. The disordered sample exhibits better performance, as has been reported in other studies; however, we observe that all cells behave similarly during the initial period of cycling even when discharged at a 10 C rate, while differences arise only after a period of cycling. Additionally, the differences in fading rate were observed to be time-dependent rather than dependent on the number of cycles. This performance degradation is believed to be related to instabilities in LNMO at higher voltages, that is, in its lower lithiation states. Therefore, it is suggested that future studies should target the individual effects of ordering and oxygen content. It is also suggested that more emphasis during electrochemical testing should be placed on the stability of samples in their delithiated state.
|
|
| 6. |
- Aktekin, Burak, et al.
(författare)
-
Cation Ordering and Oxygen Release in LiNi0.5-xMn1.5+xO4-y (LNMO)—In Situ Neutron Diffraction and Performance in Li-Ion Full Cells
- 2018
-
Konferensbidrag (refereegranskat)abstract
- LiNi0.5Mn1.5O4 (LNMO) is a promising spinel-type positive electrode for lithium ion batteries as it operates at high voltage and possesses high power capability. However, rapid performance degradation in full cells, especially at elevated temperatures, is a problem. There has been a considerable interest in its crystal structure as this is known to affect its electrochemical performance. LNMO can adopt a P4332 (cation ordered) or Fd-3m (cation disordered) arrangement depending on the synthesis conditions. Most of the studies in literature agree on better electrochemical performance for disordered LNMO [1], however, a clear understanding of the reason for this behaviour is still lacking. This partly arises from the fact that synthesis conditions leading to disordering also lead to oxygen deficiency, rock-salt impurities and therefore generate some Mn3+ [2]. Most commonly, X-ray diffraction is used to characterize these materials, however, accurate structural analysis is difficult due to the near identical scattering lengths of Mn and Ni. This is not the case for neutron diffraction. In this study, an in-situ neutron diffraction heating-cooling experiment was conducted on slightly Mn-rich LNMO under pure oxygen atmosphere in order to investigate relationship between disordering and oxygen deficiency. The study shows for the first time that there is no direct relationship between oxygen loss and cation disordering, as disordering starts prior to oxygen release. Our findings suggest that it is possible to obtain samples with varying degrees of ordering, yet with the same oxygen content and free from impurities. In the second part of the study, highly ordered, partially ordered and fully disordered samples have been tested in LNMO∥LTO (Li4Ti5O12) full cells at 55 °C. It is shown that differences in their performances arise only after repeated cycling, while all the samples behave similarly at the beginning of the test. The difference is believed to be related to instabilities of LNMO at higher voltages, that is, in its lower lithiation states.[1] A. Manthiram, K. Chemelewski, E.-S. Lee, Energy Environ. Sci. 7 (2014) 1339.[2] M. Kunduraci, G.G. Amatucci, J. Power Sources. 165 (2007) 359–367.
|
|
| 7. |
- Aktekin, Burak, et al.
(författare)
-
Concentrated LiFSI-€“Ethylene Carbonate Electrolytes and Their Compatibility with High-Capacity and High-Voltage Electrodes
- 2022
-
Ingår i: ACS Applied Energy Materials. - : American Chemical Society (ACS). - 2574-0962. ; 5:1, s. 585-595
-
Tidskriftsartikel (refereegranskat)abstract
- The unusual physical and chemical properties of electrolytes with excessive salt contents have resulted in rising interest in highly concentrated electrolytes, especially for their application in batteries. Here, we report strikingly good electrochemical performance in terms of conductivity and stability for a binary electrolyte system, consisting of lithium bis(fluorosulfonyl)imide (LiFSI) salt and ethylene carbonate (EC) solvent. The electrolyte is explored for different cell configurations spanning both high-capacity and high-voltage electrodes, which are well known for incompatibilities with conventional electrolyte systems: Li metal, Si/graphite composites, LiNi0.33Mn0.33Co0.33O2 (NMC111), and LiNi0.5Mn1.5O4 (LNMO). As compared to a LiTFSI counterpart as well as a common LP40 electrolyte, it is seen that the LiFSI:EC electrolyte system is superior in Li-metal–Si/graphite cells. Moreover, in the absence of Li metal, it is possible to use highly concentrated electrolytes (e.g., 1:2 salt:solvent molar ratio), and a considerable improvement on the electrochemical performance of NMC111-Si/graphite cells was achieved with the LiFSI:EC 1:2 electrolyte both at the room temperature and elevated temperature (55 °C). Surface characterization with scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) showed the presence of thicker surface film formation with the LiFSI-based electrolyte as compared to the reference electrolyte (LP40) for both positive and negative electrodes, indicating better passivation ability of such surface films during extended cycling. Despite displaying good stability with the NMC111 positive electrode, the LiFSI-based electrolyte showed less compatibility with the high-voltage spinel LNMO electrode (4.7 V vs Li+/Li).
|
|
| 8. |
|
|
| 9. |
- Aktekin, Burak, et al.
(författare)
-
How Mn/Ni Ordering Controls Electrochemical Performance in High-Voltage Spinel LiNi0.44Mn1.56O4 with Fixed Oxygen Content
- 2020
-
Ingår i: ACS Applied Energy Materials. - : AMER CHEMICAL SOC. - 2574-0962. ; 3:6, s. 6001-6013
-
Tidskriftsartikel (refereegranskat)abstract
- The crystal structure of LiNi0.5O4 (LNMO) can adopt either low-symmetry ordered (Fd (3) over barm) or high-symmetry disordered (P4(3)32) space group depending on the synthesis conditions. A majority of published studies agree on superior electrochemical performance of disordered LNMO, but the underlying reasons for improvement remain unclear due to the fact that different thermal history of the samples affects other material properties such as oxygen content and particle morphology. In this study, ordered and disordered samples were prepared with a new strategy that renders samples with identical properties apart from their cation ordering degree. This was achieved by heat treatment of powders under pure oxygen atmosphere at high temperature with a final annealing step at 710 degrees C for both samples, followed by slow or fast cooling. Electrochemical testing showed that cation disordering improves the stability of material in charged (delithiated) state and mitigates the impedance rise in LNMO parallel to LTO (Li4Ti5O12) and LNMO parallel to Li cells. Through X-ray photoelectron spectroscopy (XPS), thicker surface films were observed on the ordered material, indicating more electrolyte side reactions. The ordered samples also showed significant changes in the Ni 2p XPS spectra, while the generation of ligand (oxygen) holes was observed in the Ni-O environment for both samples using X-ray absorption spectroscopy (XAS) and resonant inelastic X-ray scattering (RIXS). Moreover, high-resolution transmission electron microscopy (HRTEM) images indicated that the ordered samples show a decrease in ordering near the particle surface after cycling and a tendency toward rock-salt-like phase transformations. These results show that the structural arrangement of Mn/Ni (alone) has an effect on the surface and "nearsurface" properties of LNMO, particularly in delithiated state, which is likely connected to the bulk electronic properties of this electrode material.
|
|
| 10. |
- Aktekin, Burak, et al.
(författare)
-
The Effect of the Fluoroethylene Carbonate Additive in LiNi0.5Mn1.5O4 - Li4Ti5O12 Lithium-Ion Cells
- 2017
-
Ingår i: Journal of the Electrochemical Society. - : ELECTROCHEMICAL SOC INC. - 0013-4651 .- 1945-7111. ; 164:4, s. A942-A948
-
Tidskriftsartikel (refereegranskat)abstract
- The effect of the electrolyte additive fluoroethylene carbonate (FEC) for Li-ion batteries has been widely discussed in literature in recent years. Here, the additive is studied for the high-voltage cathode LiNi0.5Mn1.5O4 (LNMO) coupled to Li4Ti5O12 (LTO) to specifically study its effect on the cathode side. Electrochemical performance of full cells prepared by using a standard electrolyte (LP40) with different concentrations of FEC (0, 1 and 5 wt%) were compared and the surface of cycled positive electrodes were analyzed by X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). The results show that addition of FEC is generally of limited use for this battery system. Addition of 5 wt% FEC results in relatively poor cycling performance, while the cells with 1 wt% FEC showed similar behavior compared to reference cells prepared without FEC. SEM and XPS analysis did not indicate the formation of thick surface layers on the LNMO cathode, however, an increase in layer thickness with increased FEC content in the electrolyte could be observed. XPS analysis on LTO electrodes showed that the electrode interactions between positive and negative electrodes occurred as Mn and Ni were detected on the surface of LTO already after 1 cycle. (C) The Author(s) 2017. Published by ECS. All rights reserved.
|
|
