| 1. |
|
|
| 2. |
- Christensen, Beth A., et al.
(författare)
-
Late Miocene Onset of Tasman Leakage and Southern Hemisphere Supergyre Ushers in Near-Modern Circulation
- 2021
-
Ingår i: Geophysical Research Letters. - : American Geophysical Union (AGU). - 0094-8276 .- 1944-8007. ; 48:18
-
Tidskriftsartikel (refereegranskat)abstract
- This study provides a Miocene-to-recent history of Tasman Leakage (TL), driving surface-to-intermediate waters from the Pacific into the Indian Ocean. TL, in addition to Indonesian ThroughFlow (ITF), constitutes an important part of the Southern Hemisphere Supergyre. Here, we employ deep-sea benthic delta C-13 timeseries from the southwestern Pacific and eastern Indian Oceans to identify the history of Tasman Leakage. The delta C-13 results combined with sedimentary evidence show that an inter-ocean connection south of Australia existed from 7 Ma onward. A southward shift in Westerlies combined with a northward movement of Australia created the oceanic corridor necessary for Tasman Leakage (between Australia and the sub-Antarctic Front) at this time. Furthermore, changes in the northern limb of the Supergyre (ITF) are evident in the sedimentary record on Broken Ridge from similar to 3 to 2 Ma when Banda Sea intermediate waters started originating from the North Pacific.
|
|
| 3. |
- Craighero, Mariavittoria, 1995, et al.
(författare)
-
Impact of Oligoether Side-Chain Length on the Thermoelectric Properties of a Polar Polythiophene
- 2024
-
Ingår i: ACS Applied Electronic Materials. - : AMER CHEMICAL SOC. - 2637-6113. ; 6:5, s. 2909-2916
-
Forskningsöversikt (refereegranskat)abstract
- Conjugated polymers with oligoether side chains make up a promising class of thermoelectric materials. In this work, the impact of the side-chain length on the thermoelectric and mechanical properties of polythiophenes is investigated. Polymers with tri-, tetra-, or hexaethylene glycol side chains are compared, and the shortest length is found to result in thin films with the highest degree of order upon doping with the p-dopant 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F(4)TCNQ). As a result, a stiff material with an electrical conductivity of up to 830 +/- 15 S cm(-1) is obtained, resulting in a thermoelectric power factor of about 21 mu W m(-1) K-2 in the case of as-cast films. Aging at ambient conditions results in an initial decrease in thermoelectric properties but then yields a highly stable performance for at least 3 months, with values of about 200 S cm(-1) and 5 mu W m(-1) K-2. Evidently, identification of the optimal side-chain length is an important criterion for the design of conjugated polymers for organic thermoelectrics.
|
|
| 4. |
- Diaz de Zerio Mendaza, Amaia, 1986, et al.
(författare)
-
Neat C60:C70 buckminsterfullerene mixtures enhance polymer solar cell performance
- 2014
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry (RSC). - 2050-7488 .- 2050-7496. ; 2:35, s. 14354-14359
-
Tidskriftsartikel (refereegranskat)abstract
- We demonstrate that bulk-heterojunction blends based on neat, unsubstituted buckminsterfullerenes (C60, C70) and a thiophene–quinoxaline copolymer (TQ1) can be readily processed from solution. Atomic force and transmission electron microscopy as well as photoluminescence spectroscopy reveal that thin films with a fine-grained nanostructure can be spin-coated, which display a good photovoltaic performance. Replacement of substituted fullerenes with C60 or C70 only results in a small drop in open-circuit voltage from 0.9 V to about 0.8 V. Thus, a power conversion efficiency of up to 2.9% can be maintained if C70 is used as the acceptor material. Further improvement in photovoltaic performance to 3.6% is achieved, accompanied by a high internal quantum efficiency of 75%, if a 1 : 1 C60:C70 mixture is used as the acceptor material, due to its improved solubility in ortho-dichlorobenzene.
|
|
| 5. |
- Dyson, M., et al.
(författare)
-
Structure/Property/Processing Relationships for Organic Solar Cells
- 2018
-
Ingår i: RSC Nanoscience and Nanotechnology. - : The Royal Society of Chemistry. - 1757-7136. - 9781782626749 ; 2018-January:45, s. 182-225
-
Bokkapitel (övrigt vetenskapligt/konstnärligt)abstract
- Rapid developments in the field of organic solar cells have been driven by this technology's potentially advantageous traits: the environmentally friendly, low-cost generation of energy with the possibility of large area manufacturing of flexible, lightweight, semi-transparent devices, with predicted low energy payback times. Major step changes leading to vastly improved devices with ever-increasing performance have been achieved through new insights into materials design and an improved understanding of the often complex microstructure and phase morphology of organic solar cell systems. This chapter summarises the advances in synthesis, concentrating on the relevant structure/property relations and how the chemical structure affects processing and the microstructure. This is followed by a detailed discussion of classical materials science approaches that assist in gaining insights into complex materials systems, such as organic solar cell blends from the molecular to the micrometre scale, with a focus on polymer-based systems and how to apply this knowledge to future larger area processing of organic photovoltaic architectures.
|
|
| 6. |
- Enquist, Henrik, et al.
(författare)
-
FemtoMAX - An X-ray beamline for structural dynamics at the short-pulse facility of MAX IV
- 2018
-
Ingår i: Journal of Synchrotron Radiation. - 0909-0495. ; 25:2, s. 570-579
-
Tidskriftsartikel (refereegranskat)abstract
- The FemtoMAX beamline facilitates studies of the structural dynamics of materials. Such studies are of fundamental importance for key scientific problems related to programming materials using light, enabling new storage media and new manufacturing techniques, obtaining sustainable energy by mimicking photosynthesis, and gleaning insights into chemical and biological functional dynamics. The FemtoMAX beamline utilizes the MAX IV linear accelerator as an electron source. The photon bursts have a pulse length of 100fs, which is on the timescale of molecular vibrations, and have wavelengths matching interatomic distances (Å). The uniqueness of the beamline has called for special beamline components. This paper presents the beamline design including ultrasensitive X-ray beam-position monitors based on thin Ce:YAG screens, efficient harmonic separators and novel timing tools.The FemtoMAX beamline facilitates studies of the structural dynamics of materials on the femtosecond timescale. The first commissioning results are presented.
|
|
| 7. |
- Fu, Michael, 1963, et al.
(författare)
-
Trends in myocarditis incidence, complications and mortality in Sweden from 2000 to 2014.
- 2022
-
Ingår i: Scientific reports. - : Springer Science and Business Media LLC. - 2045-2322. ; 12:1
-
Tidskriftsartikel (refereegranskat)abstract
- Investigate trends in myocarditis incidence and prognosis in Sweden during 2000-2014. Little data exist concerning population-trends in incidence of hospitalizations for myocarditis and subsequent prognosis. Linking Swedish National Patient and Cause of Death Registers, we identified individuals≥16years with first-time diagnosis of myocarditis during 2000-2014. Reference population, matched for age and birth year (n=16,622) was selected from Swedish Total Population Register. Among the 8 679 cases (75% men, 64%<50years), incidence rate/100,000 inhabitants rose from 6.3 to 8.6 per 100,000, mostly in men and those<50years. Incident heart failure/dilated cardiomyopathy occurred in 6.2% within 1year after index hospitalization and in 10.2% during 2000-2014, predominantly in those≥50years (12.1% within 1year, 20.8% during 2000-2014). In all 8.1% died within 1year, 0.9% (<50years) and 20.8% (≥50years). Hazard ratios (adjusted for age, sex) for 1-year mortality comparing cases and controls were 4.00 (95% confidence interval 1.37-11.70), 4.48 (2.57-7.82), 4.57 (3.31-6.31) and 3.93 (3.39-4.57) for individuals aged<30, 30 to<50, 50 to<70, and≥70years, respectively. The incidence of myocarditis during 2000-2014 increased, predominantly in men<50years. One-year mortality was low, but fourfold higher compared with reference population.
|
|
| 8. |
- George, Zandra, 1985, et al.
(författare)
-
The Influence of Alkoxy Substitutions on the Properties of Diketopyrrolopyrrole-Phenyl Copolymers for Solar Cells
- 2013
-
Ingår i: Materials. - : MDPI AG. - 1996-1944. ; 6:7, s. 3022-3034
-
Tidskriftsartikel (refereegranskat)abstract
- A previously reported diketopyrrolopyrrole (DPP)-phenyl copolymer is modified by adding methoxy or octyloxy side chains on the phenyl spacer. The influence of these alkoxy substitutions on the physical, opto-electronic properties, and photovoltaic performance were investigated. It was found that the altered physical properties correlated with an increase in chain flexibility. Well-defined oligomers were synthesized to verify the observed structure-property relationship. Surprisingly, methoxy substitution on the benzene spacer resulted in higher melting and crystallization temperatures in the synthesized oligomers. This trend is not observed in the polymers, where the improved interactions are most likely counteracted by the larger conformational possibilities in the polymer chain upon alkoxy substitution. The best photovoltaic performance was obtained for the parent polymer: fullerene blends whereas the modifications on the other two polymers result in reduced open-circuit voltage and varying current densities under similar processing conditions. The current densities could be related to different polymer: fullerene blend morphologies. These results show that supposed small structural alterations such as methoxy substitution already significantly altered the physical properties of the parent polymer and also that oligomers and polymers respond divergent to structural alterations made on a parent structure.
|
|
| 9. |
- Grytsan, Andrii, 1986-
(författare)
-
Abdominal aortic aneurysm inception and evolution - A computational model
- 2016
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Abdominal aortic aneurysm (AAA) is characterized by a bulge in the abdominal aorta. AAA development is mostly asymptomatic, but such a bulge may suddenly rupture, which is associated with a high mortality rate. Unfortunately, there is no medication that can prevent AAA from expanding or rupturing. Therefore, patients with detected AAA are monitored until treatment indication, such as maximum AAA diameter of 55 mm or expansion rate of 1 cm/year. Models of AAA development may help to understand the disease progression and to inform decision-making on a patient-specific basis. AAA growth and remodeling (G&R) models are rather complex, and before the challenge is undertaken, sound clinical validation is required.In Paper A, an existing thick-walled model of growth and remodeling of one layer of an AAA slice has been extended to a two-layered model, which better reflects the layered structure of the vessel wall. A parameter study was performed to investigate the influence of mechanical properties and G&R parameters of such a model on the aneurysm growth.In Paper B, the model from Paper A was extended to an organ level model of AAA growth. Furthermore, the model was incorporated into a Fluid-Solid-Growth (FSG) framework. A patient-specific geometry of the abdominal aorta is used to illustrate the model capabilities.In Paper C, the evolution of the patient-specific biomechanical characteristics of the AAA was investigated. Four patients with five to eight Computed Tomography-Angiography (CT-A) scans at different time points were analyzed. Several non-trivial statistical correlations were found between the analyzed parameters.In Paper D, the effect of different growth kinematics on AAA growth was investigated. The transverse isotropic in-thickness growth was the most suitable AAA growth assumption, while fully isotropic growth and transverse isotropic in-plane growth produced unrealistic results. In addition, modeling of the tissue volume change improved the wall thickness prediction, but still overestimated thinning of the wall during aneurysm expansion.
|
|
| 10. |
- Henriksson, Patrik, 1983, et al.
(författare)
-
Stability study of quinoxaline and pyrido pyrazine based co-polymers for solar cell applications
- 2014
-
Ingår i: Solar Energy Materials and Solar Cells. - : Elsevier BV. - 0927-0248 .- 1879-3398. ; 130, s. 138-143
-
Tidskriftsartikel (refereegranskat)abstract
- We present two co-polymer families; one based on a thiophene-quinoxaline unit and one on a thiophene-pyrido pyrazine unit. Co-polymerization of these monomers with thiophene-hexylthiophene was performed to create polymers with an optical absorption that fully covers the visible part of the solar spectrum with the aim to enhance the solar cell performances of these polymers. We have also studied how increasing the fraction of thiophene-hexylthiophene affects the photo-oxidative stability of these polymers. Thiophene-pyrido pyrazine solar cells displayed increased device efficiency upon addition of the thiophene-hexylthiophene and, in addition, the stability is retained upon inclusion of these units. In contrast, we found that for the thiophene-quinoxaline based co-polymer, both device efficiency and stability decreased with increasing thiophene-hexylthiophene fraction. Moreover, our results indicate that the photo-oxidative stability of the thiophene-quinoxaline co-polymer is independent of the polymer molecular weight as well as of the film thickness.
|
|
