| 1. |
- Rodriguez, D., et al.
(författare)
-
MATS and LaSpec : High-precision experiments using ion traps and lasers at FAIR
- 2010
-
Ingår i: The European physical journal. Special topics. - : Springer Science and Business Media LLC. - 1951-6355 .- 1951-6401. ; 183, s. 1-123
-
Forskningsöversikt (refereegranskat)abstract
- Nuclear ground state properties including mass, charge radii, spins and moments can be determined by applying atomic physics techniques such as Penning-trap based mass spectrometry and laser spectroscopy. The MATS and LaSpec setups at the low-energy beamline at FAIR will allow us to extend the knowledge of these properties further into the region far from stability. The mass and its inherent connection with the nuclear binding energy is a fundamental property of a nuclide, a unique ""fingerprint"". Thus, precise mass values are important for a variety of applications, ranging from nuclear-structure studies like the investigation of shell closures and the onset of deformation, tests of nuclear mass models and mass formulas, to tests of the weak interaction and of the Standard Model. The required relative accuracy ranges from 10(-5) to below 10(-8) for radionuclides, which most often have half-lives well below 1 s. Substantial progress in Penning trap mass spectrometry has made this method a prime choice for precision measurements on rare isotopes. The technique has the potential to provide high accuracy and sensitivity even for very short-lived nuclides. Furthermore, ion traps can be used for precision decay studies and offer advantages over existing methods. With MATS (Precision Measurements of very short-lived nuclei using an Advanced Trapping System for highly-charged ions) at FAIR we aim to apply several techniques to very short-lived radionuclides: High-accuracy mass measurements, in-trap conversion electron and alpha spectroscopy, and trap-assisted spectroscopy. The experimental setup of MATS is a unique combination of an electron beam ion trap for charge breeding, ion traps for beam preparation, and a high-precision Penning trap system for mass measurements and decay studies. For the mass measurements, MATS offers both a high accuracy and a high sensitivity. A relative mass uncertainty of 10(-9) can be reached by employing highly-charged ions and a non-destructive Fourier-Transform Ion-Cyclotron-Resonance (FT-ICR) detection technique on single stored ions. This accuracy limit is important for fundamental interaction tests, but also allows for the study of the fine structure of the nuclear mass surface with unprecedented accuracy, whenever required. The use of the FT-ICR technique provides true single ion sensitivity. This is essential to access isotopes that are produced with minimum rates which are very often the most interesting ones. Instead of pushing for highest accuracy, the high charge state of the ions can also be used to reduce the storage time of the ions, hence making measurements on even shorter-lived isotopes possible. Decay studies in ion traps will become possible with MATS. Novel spectroscopic tools for in-trap high-resolution conversion-electron and charged-particle spectroscopy from carrier-free sources will be developed, aiming e. g. at the measurements of quadrupole moments and E0 strengths. With the possibility of both high-accuracy mass measurements of the shortest-lived isotopes and decay studies, the high sensitivity and accuracy potential of MATS is ideally suited for the study of very exotic nuclides that will only be produced at the FAIR facility. Laser spectroscopy of radioactive isotopes and isomers is an efficient and model-independent approach for the determination of nuclear ground and isomeric state properties. Hyperfine structures and isotope shifts in electronic transitions exhibit readily accessible information on the nuclear spin, magnetic dipole and electric quadrupole moments as well as root-mean-square charge radii. The dependencies of the hyperfine splitting and isotope shift on the nuclear moments and mean square nuclear charge radii are well known and the theoretical framework for the extraction of nuclear parameters is well established. These extracted parameters provide fundamental information on the structure of nuclei at the limits of stability. Vital information on both bulk and valence nuclear properties are derived and an exceptional sensitivity to changes in nuclear deformation is achieved. Laser spectroscopy provides the only mechanism for such studies in exotic systems and uniquely facilitates these studies in a model-independent manner. The accuracy of laser-spectroscopic-determined nuclear properties is very high. Requirements concerning production rates are moderate; collinear spectroscopy has been performed with production rates as few as 100 ions per second and laser-desorption resonance ionization mass spectroscopy (combined with beta-delayed neutron detection) has been achieved with rates of only a few atoms per second. This Technical Design Report describes a new Penning trap mass spectrometry setup as well as a number of complementary experimental devices for laser spectroscopy, which will provide a complete system with respect to the physics and isotopes that can be studied. Since MATS and LaSpec require high-quality low-energy beams, the two collaborations have a common beamline to stop the radioactive beam of in-flight produced isotopes and prepare them in a suitable way for transfer to the MATS and LaSpec setups, respectively.
|
|
| 2. |
- Aurand, Bastian, et al.
(författare)
-
Enhanced radiation pressure-assisted acceleration by temporally tuned counter-propagating pulses
- 2014
-
Ingår i: Nuclear Instruments & Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors, and Associated Equipment. - : Elsevier BV. - 0167-5087 .- 0168-9002. ; 740, s. 83-86
-
Tidskriftsartikel (refereegranskat)abstract
- Within the last decade, laser-ion acceleration has become a field of broad interest. The possibility to generate short proton- or heavy ion bunches with an energy of a few tens of MeV by table-top laser systems could open new opportunities for medical or technical applications. Nevertheless, today's laser-acceleration schemes lead mainly to a temperature-like energy distribution of the accelerated ions, a big disadvantage compared to mono-energetic beams from conventional accelerators. Recent results 111 of laser-ion acceleration using radiation-pressure appear promising to overcome this drawback. In this paper, we demonstrate the influence of a second counter-propagating laser pulse interacting with a nm-thick target, creating a well defined pre-plasma. (C) 2013 Elsevier B.V. All rights reserved.
|
|
| 3. |
- Aurand, Bastian, et al.
(författare)
-
Radiation pressure-assisted acceleration of ions using multi-component foils in high-intensity laser-matter interactions
- 2013
-
Ingår i: New Journal of Physics. - : IOP Publishing. - 1367-2630. ; 15
-
Tidskriftsartikel (refereegranskat)abstract
- Experimental results on the acceleration of protons and carbon ions from ultra-thin polymer foils at intensities of up to 6x10(19)Wcm(-2) are presented revealing quasi-monoenergetic spectral characteristics for different ion species at the same time. For carbon ions and protons, a linear correlation between the cutoff energy and the peak energy is observed when the laser intensity is increased. Particle-in-cell simulations supporting the experimental results imply an ion acceleration mechanism driven by the radiation pressure as predicted for multi-component foils at these intensities.
|
|
| 4. |
- Cerutti, P. O., et al.
(författare)
-
The socioeconomic and environmental impacts of wood energy value chains in Sub-Saharan Africa : A systematic map protocol
- 2015
-
Ingår i: Environmental Evidence. - : Springer Science and Business Media LLC. - 2047-2382. ; 4:1
-
Tidskriftsartikel (refereegranskat)abstract
- Background: The vast majority of households in Sub-Saharan Africa (SSA) depend on wood energy - comprising firewood and charcoal - for their daily energetic needs. Such consumption trends are expected to remain a common feature of SSA's wood energy production and supply chains, at least in the short- to medium-terms. Notwithstanding its importance, wood energy generally has low priority in SSA national policies. However, the use of wood energy is often considered a key driver of unsustainable management and negative environmental consequences in the humid and dry forests. To date, unsystematic assessments of the socio-economic and environmental consequences of wood energy use have underplayed its significance, thus further hampering policy debates. Therefore, a more balanced approach which considers both demand and supply dynamics is needed. This systematic map aims at providing a comprehensive approach to understanding the role and impacts of wood energy across all regions and aspects in SSA. Methods: The objective of this systematic map is to collate evidence from studies of environmental and socio-economic impacts of wood energy value chains, by considering both demand and supply within SSA. The map questions are framed using a Populations, Exposure, Comparators and Outcomes (PECO) approach. We name the supply and demand of wood energy as the "exposure," composed of wood energy production, harvesting, processing, and consumption. The populations of interest include both the actors involved in these activities and the forest sites where these activities occur. The comparator is defined as those cases where the same wood energy activities occur with i) available/accessible alternative energy sources, ii) regulatory frameworks that govern the sector and iii) alternative technologies for efficient use. The outcomes of interest encompass both socioeconomic and environmental impacts that can affect more than the populations named above. For instance, in addition to the direct socioeconomic impacts felt by participants in the wood energy value chain, forest dwellers may experience livelihood changes due to forest degradation caused by external harvesters. Moreover, intensified deforestation in one area may concurrently lead to forest regeneration in another.
|
|
