| 1. |
- Putaud, J. -P, et al.
(författare)
-
A European aerosol phenomenology-3 : Physical and chemical characteristics of particulate matter from 60 rural, urban, and kerbside sites across Europe
- 2010
-
Ingår i: Atmospheric Environment. - : Elsevier BV. - 1352-2310 .- 1873-2844. ; 44:10, s. 1308-1320
-
Tidskriftsartikel (refereegranskat)abstract
- This paper synthesizes data on aerosol (particulate matter, PM) physical and chemical characteristics, which were obtained over the past decade in aerosol research and monitoring activities at more than 60 natural background, rural, near-city, urban, and kerbside sites across Europe. The data include simultaneously measured PM10 and/or PM2.5 mass on the one hand, and aerosol particle number concentrations or PM chemistry on the other hand. The aerosol data presented in our previous works (Van Dingenen et al., 2004; Putaud et al., 2004) were updated and merged to those collected in the framework of the EU supported European Cooperation in the field of Scientific and Technical action COST633 (Particulate matter: Properties related to health effects). A number of conclusions from our previous studies were confirmed. There is no single ratio between PM2.5 and PM10 mass concentrations valid for all sites, although fairly constant ratios ranging from 0.5 to 0.9 are observed at most individual sites. There is no general correlation between PM mass and particle number concentrations, although particle number concentrations increase with PM2.5 levels at most sites. The main constituents of both PM10 and PM2.5 are generally organic matter, sulfate and nitrate. Mineral dust can also be a major constituent of PM10 at kerbside sites and in Southern Europe. There is a clear decreasing gradient in SO42- and NO3- contribution to PM10 when moving from rural to urban to kerbside sites. In contrast, the total carbon/PM10 ratio increases from rural to kerbside sites. Some new conclusions were also drawn from this work: the ratio between ultrafine particle and total particle number concentration decreases with PM2.5 concentration at all sites but one, and significant gradients in PM chemistry are observed when moving from Northwestern, to Southern to Central Europe. Compiling an even larger number of data sets would have further increased the significance of our conclusions, but collecting all the aerosol data sets obtained also through research projects remains a tedious task.
|
|
| 2. |
- Baumgardner, D., et al.
(författare)
-
Soot reference materials for instrument calibration and intercomparisons: a workshop summary with recommendations
- 2012
-
Ingår i: Atmospheric Measurement Techniques. - : Copernicus GmbH. - 1867-1381 .- 1867-8548. ; 5:8, s. 1869-1887
-
Tidskriftsartikel (refereegranskat)abstract
- Soot, which is produced from biomass burning and the incomplete combustion of fossil and biomass fuels, has been linked to regional and global climate change and to negative health problems. Scientists measure the properties of soot using a variety of methods in order to quantify source emissions and understand its atmospheric chemistry, reactivity under emission conditions, interaction with solar radiation, influence on clouds, and health impacts. A major obstacle currently limiting progress is the absence of established standards or reference materials for calibrating the many instruments used to measure the various properties of soot. The current state of availability and practicability of soot standard reference materials (SRMs) was reviewed by a group of 50 international experts during a workshop in June of 2011. The workshop was convened to summarize the current knowledge on soot measurement techniques, identify the measurement uncertainties and limitations related to the lack of soot SRMs, and identify attributes of SRMs that, if developed, would reduce measurement uncertainties. The workshop established that suitable SRMs are available for calibrating some, but not all, measurement methods. The community of users of the single-particle soot-photometer (SP2), an instrument using laser-induced incandescence, identified a suitable SRM, fullerene soot, but users of instruments that measure light absorption by soot collected on filters did not. Similarly, those who use thermal optical analysis (TOA) to analyze the organic and elemental carbon components of soot were not satisfied with current SRMs. The workshop, and subsequent, interactive discussions, produced a number of recommendations for the development of new SRMs, and their implementation, that would be suitable for the different soot measurement methods.
|
|
| 3. |
|
|
| 4. |
- Isaxon, Christina, et al.
(författare)
-
Characteristics of Welding Fume Aerosol Investigated in Three Swedish Workshops
- 2009
-
Ingår i: Inhaled Particles X. - : IOP Publishing. - 1742-6596 .- 1742-6588. ; 151
-
Konferensbidrag (refereegranskat)abstract
- Potentially high human exposures to nanometer sized airborne particles occur due to welding and other thermal processes in industrial environments. Detailed field measurements of physical and chemical particle characteristics were performed in three work-shops in Sweden. Measurements were performed both in the plume 5-20 cm above the welding point and in the background air (more than 5 m away from the nearest known particle source). Particle number and mass concentrations were measured on-line. A low pressure impactor was used for size-resolved chemical particle composition. The in-plume measurements generated the chemical signatures for different welding processes. These signatures were then used to identify contributions from various processes to the particle concentrations in different size classes. The background number and mass concentrations increased by more than an order of magnitude during intense activities in the work-shops compared to low activities during breaks.
|
|
| 5. |
- Samoli, E, et al.
(författare)
-
Exposure to ultrafine particles and respiratory hospitalisations in five European cities
- 2016
-
Ingår i: The European respiratory journal. - : European Respiratory Society (ERS). - 1399-3003 .- 0903-1936. ; 48:3, s. 674-682
-
Tidskriftsartikel (refereegranskat)abstract
- Epidemiological evidence on the associations between exposure to ultrafine particles (UFP), with aerodynamic electrical mobility diameters <100 nm, and health is limited. We gathered data on UFP from five European cities within 2001–2011 to investigate associations between short-term changes in concentrations and respiratory hospitalisations.We applied city-specific Poisson regression models and combined city-specific estimates to obtain pooled estimates. We evaluated the sensitivity of our findings to co-pollutant adjustment and investigated effect modification patterns by period of the year, age at admission and specific diagnoses.Our results for the whole time period do not support an association between UFP and respiratory hospitalisations, although we found suggestive associations among those 0–14 years old. We nevertheless report consistent adverse effect estimates during the warm period of the year, statistically significant after lag 2 when an increase by 10 000 particles per cm3 was associated with a 4.27% (95% CI 1.68–6.92%) increase in hospitalisations. These effect estimates were robust to particles' mass or gaseous pollutants adjustment.Considering that our findings during the warm period may reflect better exposure assessment and that the main source of non-soluble UFP in urban areas is traffic, our results call for improved regulation of traffic emissions.
|
|
| 6. |
|
|
| 7. |
|
|
| 8. |
- Baalousha, M., et al.
(författare)
-
Modeling nanomaterial fate and uptake in the environment: current knowledge and future trends
- 2016
-
Ingår i: Environmental Science-Nano. - : Royal Society of Chemistry (RSC). - 2051-8153 .- 2051-8161. ; 3:2, s. 323-345
-
Tidskriftsartikel (refereegranskat)abstract
- Modeling the environmental fate of nanomaterials (NMs) and their uptake by cells and organisms in the environment is essential to underpin experimental research, develop overarching theories, improve our fundamental understanding of NM exposure and hazard, and thus enable risk assessment of NMs. Here, we critically review the state-of-the-art of the available models that can be applied/adapted to quantify/predict NM fate and uptake in aquatic and terrestrial systems and make recommendations regarding future directions for model development. Fate models have evolved from substance flow analysis models that lack nano-specific processes to more advanced mechanistic models that (at least partially) take nano-specific (typically non-equilibrium, dynamic) processes into account, with a focus on key fate processes such as agglomeration, sedimentation and dissolution. Similarly, NM uptake by organisms is driven by dynamic processes rather than by equilibrium partitioning. Hence, biokinetic models are more suited to model NM uptake, compared with the simple bio-accumulation factors used for organic compounds. Additionally, biokinetic models take speciation processes (e.g. particulate versus ionic uptake) into account, although identifying essential environment-specific processes to include in models remains a challenge. The models developed so far require parameterization, calibration and validation with available data, e.g. field data (if available), or experimental data (e.g. aquatic and terrestrial mesocosms), rather than extension to more complex and sophisticated models that include all possible transformation processes. Collaborative efforts between experimentalists and modelers to generate appropriate ground-truth data would advance the field most rapidly.
|
|
