| 1. |
- Abelev, Betty, et al.
(författare)
-
Measurement of prompt J/psi and beauty hadron production cross sections at mid-rapidity in pp collisions at root s=7 TeV
- 2012
-
Ingår i: Journal of High Energy Physics. - 1029-8479. ; :11
-
Tidskriftsartikel (refereegranskat)abstract
- The ALICE experiment at the LHC has studied J/psi production at mid-rapidity in pp collisions at root s = 7 TeV through its electron pair decay on a data sample corresponding to an integrated luminosity L-int = 5.6 nb(-1). The fraction of J/psi from the decay of long-lived beauty hadrons was determined for J/psi candidates with transverse momentum p(t) > 1,3 GeV/c and rapidity vertical bar y vertical bar < 0.9. The cross section for prompt J/psi mesons, i.e. directly produced J/psi and prompt decays of heavier charmonium states such as the psi(2S) and chi(c) resonances, is sigma(prompt J/psi) (p(t) > 1.3 GeV/c, vertical bar y vertical bar < 0.9) = 8.3 +/- 0.8(stat.) +/- 1.1 (syst.)(-1.4)(+1.5) (syst. pol.) mu b. The cross section for the production of b-hadrons decaying to J/psi with p(t) > 1.3 GeV/c and vertical bar y vertical bar < 0.9 is a sigma(J/psi <- hB) (p(t) > 1.3 GeV/c, vertical bar y vertical bar < 0.9) = 1.46 +/- 0.38 (stat.)(-0.32)(+0.26) (syst.) mu b. The results are compared to QCD model predictions. The shape of the p(t) and y distributions of b-quarks predicted by perturbative QCD model calculations are used to extrapolate the measured cross section to derive the b (b) over bar pair total cross section and d sigma/dy at mid-rapidity.
|
|
| 2. |
- Abelev, Betty, et al.
(författare)
-
Long-range angular correlations on the near and away side in p-Pb collisions at root S-NN=5.02 TeV
- 2013
-
Ingår i: Physics Letters. Section B: Nuclear, Elementary Particle and High-Energy Physics. - : Elsevier BV. - 0370-2693. ; 719:1-3, s. 29-41
-
Tidskriftsartikel (refereegranskat)abstract
- Angular correlations between charged trigger and associated particles are measured by the ALICE detector in p-Pb collisions at a nucleon-nucleon centre-of-mass energy of 5.02 TeV for transverse momentum ranges within 0.5 < P-T,P-assoc < P-T,P-trig < 4 GeV/c. The correlations are measured over two units of pseudorapidity and full azimuthal angle in different intervals of event multiplicity, and expressed as associated yield per trigger particle. Two long-range ridge-like structures, one on the near side and one on the away side, are observed when the per-trigger yield obtained in low-multiplicity events is subtracted from the one in high-multiplicity events. The excess on the near-side is qualitatively similar to that recently reported by the CMS Collaboration, while the excess on the away-side is reported for the first time. The two-ridge structure projected onto azimuthal angle is quantified with the second and third Fourier coefficients as well as by near-side and away-side yields and widths. The yields on the near side and on the away side are equal within the uncertainties for all studied event multiplicity and p(T) bins, and the widths show no significant evolution with event multiplicity or p(T). These findings suggest that the near-side ridge is accompanied by an essentially identical away-side ridge. (c) 2013 CERN. Published by Elsevier B.V. All rights reserved.
|
|
| 3. |
- Abelev, Betty, et al.
(författare)
-
Underlying Event measurements in pp collisions at root s=0.9 and 7 TeV with the ALICE experiment at the LHC
- 2012
-
Ingår i: Journal of High Energy Physics. - 1029-8479. ; :7
-
Tidskriftsartikel (refereegranskat)abstract
- We present measurements of Underlying Event observables in pp collisions at root s = 0 : 9 and 7 TeV. The analysis is performed as a function of the highest charged-particle transverse momentum p(T),L-T in the event. Different regions are defined with respect to the azimuthal direction of the leading (highest transverse momentum) track: Toward, Transverse and Away. The Toward and Away regions collect the fragmentation products of the hardest partonic interaction. The Transverse region is expected to be most sensitive to the Underlying Event activity. The study is performed with charged particles above three different p(T) thresholds: 0.15, 0.5 and 1.0 GeV/c. In the Transverse region we observe an increase in the multiplicity of a factor 2-3 between the lower and higher collision energies, depending on the track p(T) threshold considered. Data are compared to PYTHIA 6.4, PYTHIA 8.1 and PHOJET. On average, all models considered underestimate the multiplicity and summed p(T) in the Transverse region by about 10-30%.
|
|
| 4. |
- Ding, Zheli, et al.
(författare)
-
A thermo-chemical and biotechnological approaches for bamboo waste recycling and conversion to value added product: Towards a zero-waste biorefinery and circular bioeconomy
- 2023
-
Ingår i: Fuel. - : Elsevier BV. - 0016-2361 .- 1873-7153. ; 333
-
Tidskriftsartikel (refereegranskat)abstract
- Fast growth of bamboo species make them a suitable candidate for eco-restoration, while its lignocellulosic substrate could be used for production of high-value green products such as biofuels, chemicals, and biomaterials. Within these frameworks, this review comprehensively explored the thermochemical and biological conversion of bamboo biomass to value-added fuels and chemicals. Additionally, this review stretches an in-depth understanding of bamboo biomass lignin extraction technologies and bioengineered methodologies, as well as their biorefinery conversion strategies. Additionally, bamboo biomass often utilized in biorefineries are mostly constituted of cellulose, hemicellulose, and lignin, along with proteins, lipids, and a few micronutrients which are not utilized efficientely by current bioengineered techniques. The results indicates that the potential for producing high-value products from bamboo biomass has not been adequately explored. However, enormous potential is still available to make bamboo biorefinery technologies cost-effective, and environmentally sustainable, which are discussed in the current review comprehensively. Furthermore, processes such as pretreatment, enzymatic hydrolysis, and fermentation are essential to obtain final high-value bio-based products from bamboo biomass, therefore, this review critically designed to explore the current state of the art of these technologies. Overall, the current review establishes a zero-waste suastainable approachs for the reformation of bamboo biomass into chemicals, biofuels, and value-added products.
|
|
| 5. |
- Wainaina, Steven, et al.
(författare)
-
Resource recovery and circular economy from organic solid waste using aerobic and anaerobic digestion technologies
- 2020
-
Ingår i: Bioresource Technology. - : Elsevier BV. - 0960-8524 .- 1873-2976.
-
Tidskriftsartikel (refereegranskat)abstract
- With the inevitable rise in human population, resource recovery from waste stream is becoming important for a sustainable economy, conservation of the ecosystem as well as for reducing the dependence on the finite natural resources. In this regard, a bio-based circular economy considers organic wastes and residues as potential resources that can be utilized to supply chemicals, nutrients, and fuels needed by mankind. This review explored the role of aerobic and anaerobic digestion technologies for the advancement of a bio-based circular society. The developed routes within the anaerobic digestion domain, such as the production of biogas and other high-value chemicals (volatile fatty acids) were discussed. The potential to recover important nutrients, such as nitrogen through composting, was also addressed. An emphasis was made on the innovative models for improved economics and process performance, which include co-digestion of various organic solid wastes, recovery of multiple bio-products, and integrated bioprocesses.
|
|
| 6. |
- Duan, Yumin, et al.
(författare)
-
Succession of keratin-degrading bacteria and associated health risks during pig manure composting
- 2020
-
Ingår i: Journal of Cleaner Production. - : Elsevier. - 0959-6526 .- 1879-1786. ; 258
-
Tidskriftsartikel (refereegranskat)abstract
- The alteration of microbial dynamics and their divergence were evaluated in bristles containing pig manure (PM) compost with different concentrations of coconut shell biochar [0% (T1), 2.5% (T2), 5.0% (T3), 7.5% (T4) and 10% (T5)] amendment. The results revealed that the CB amendment significantly increased the keratin degradation efficiency and bacterial diversity during composting. The richest bacterial diversity and the highest keratin reduction of 39.1% were observed in the PM compost with a 7.5% CB amendment. The most abundant phyla were Firmicutes and Actinobacteria (which accounted for 87.91% and 12.09%, respectively), and the superior genera were Bacilli and Clostridia (which accounted for 23.52% and 61.17%, respectively). In addition, a dimensionality analysis from principal coordinate’s analysis and non-metric multidimensional scaling showed that the bacterial community had a significant divergence among the different dosages of CB. Furthermore, the correlation found in a canonical correspondence analysis illustrated that the physio-chemical environmental factors were more relevant for the bacterial community within the CB in the compost than in that in the control sample. Overall, the application of biochar for composting altered the typical selectivity for functional bacteria and further influenced the organic waste biotransformation during bristle-containing PM composting. (C) 2020 Elsevier Ltd. All rights reserved.
|
|
| 7. |
- Jena, Anjan Kumar, et al.
(författare)
-
Strain-mediated ferromagnetism and low-field magnetic reversal in Co doped monolayer WS2
- 2022
-
Ingår i: Scientific Reports. - : Springer Nature. - 2045-2322. ; 12:1
-
Tidskriftsartikel (refereegranskat)abstract
- Strain-mediated magnetism in 2D materials and dilute magnetic semiconductors hold multifunctional applications for future nano-electronics. Herein, First principles calculations are employed to study the influence of biaxial strain on the magnetic properties of Co-doped monolayer WS2. The non-magnetic WS2 shows ferromagnetic signature upon Co doping due to spin polarization, which is further improved at low compressive (-2 %) and tensile (+2 %) strains. From the PDOS and spin density analysis, the opposite magnetic ordering is found to be favourable under the application of compressive and tensile strains. The double exchange interaction and p-d hybridization mechanisms make Co-doped WS2 a potential host for magnetism. More importantly, the competition between exchange and crystal field splittings, i.e. (Delta(ex) > Delta(cfs)), of the Co-atom play pivotal roles in deciding the values of the magnetic moments under applied strain. Micromagnetic simulation reveals, the ferromagnetic behavior calculated from DFT exhibits low-field magnetic reversal (190 Oe). Moreover, the spins of Co-doped WS2 are slightly tilted from the easy axis orientations showing slanted ferromagnetic hysteresis loop. The ferromagnetic nature of Co-doped WS2 suppresses beyond +/- 2 strain, which is reflected in terms of decrease in the coercivity in the micromagnetic simulation. The understanding of low-field magnetic reversal and spin orientations in Co-doped WS2 may pave the way for next-generation spintronics and straintronics applications.
|
|
| 8. |
- Marichelvam, M.K., et al.
(författare)
-
Investigation on mechanical properties of novel natural fiber-epoxy resin hybrid composites for engineering structural applications
- 2023
-
Ingår i: Case Studies in Construction Materials. - : Elsevier. - 2214-5095. ; 19
-
Tidskriftsartikel (refereegranskat)abstract
- Polymers and fibers are the main components of cementitious composite materials to reinforce concrete. The synthetic fibers used in concrete composites typically weigh and also, and they are easily subjected to thermal degradation. To tackle the above issues, researchers developed various natural fiber-based composites. In the paper, the mechanical characteristics of hybrid composites were examined. The hybrid composites were developed using Madar, Gongura, and Hibiscus cannabinus fibers. The polyester resin was the matrix. The fibers were treated chemically using a 5% sodium hydroxide (NaOH) solution. The fibers were then carefully cleaned with distilled water twice and baked for 70 min at 60 °C. For the evaluation of the tensile, flexural, and impact properties of the hybrid composites, specimens were made in accordance with ASTM standards. The treated composite sample (S3) specimen exhibits a tensile strength (TS) of approximately 34.720 N/mm2, flexural strength (FS) of 77.957 MPa, and flexural modulus (FM) of 1548.588 GPa. The average water absorption of the sample is only 2.45%. The hardness and impact strength (IS) of the samples are also superior to those of several other composites studied in the literature. Hence, the proposed hybrid composites could be a potential material for reinforcing the concrete composites to provide a higher service rate and greater durability to the structures.
|
|
| 9. |
- Mukesh Kumar, Awasthi, et al.
(författare)
-
A critical review of organic manure biorefinery models toward sustainable circular bioeconomy: Technological challenges, advancements, innovations, and future perspectives
- 2019
-
Ingår i: Renewable & sustainable energy reviews. - : Elsevier BV. - 1364-0321 .- 1879-0690. ; , s. 115-131
-
Tidskriftsartikel (refereegranskat)abstract
- Total livestock emissions account for up to 14.5% of man-made greenhouse gas emissions. Counteractive measures, such as circular economy concepts and negative emission technologies are necessary to limit global warming below 1.5 °C. Possible treatment options for organic manure include anaerobic digestion, combustion, gasification, hydrothermal liquefaction and composting. The choice of treatment varies depending on the economics, the requirement of a specific product, and sociocultural factors. Commercialization of these treatments needs a blend of appropriate technology, feasible economics, policy support and agreeable socio-cultural conditions. Key findings of this study include the following: 1. Increasing scientific awareness about manure management and treatment; 2. Building a sustainable cooperative model to commercialize technologies; 3. Creating a market for manure recycling products; 4. The role of policy in supporting technologies and consumers; and 5. The codigestion of substrates for better efficacy. Current trends show minimal actions in place as opposed to the high-rate of acceleration that is necessary.
|
|
| 10. |
|
|
