| 1. |
- Florea, Cristina, et al.
(författare)
-
A combined experimental atomic force microscopy-based nanoindentation and computational modeling approach to unravel the key contributors to the time-dependent mechanical behavior of single cells
- 2017
-
Ingår i: Biomechanics and Modeling in Mechanobiology. - : Springer Berlin/Heidelberg. - 1617-7959 .- 1617-7940. ; 16:1, s. 297-311
-
Tidskriftsartikel (refereegranskat)abstract
- Cellular responses to mechanical stimuli are influenced by the mechanical properties of cells and the surrounding tissue matrix. Cells exhibit viscoelastic behavior in response to an applied stress. This has been attributed to fluid flow-dependent and flow-independent mechanisms. However, the particular mechanism that controls the local time-dependent behavior of cells is unknown. Here, a combined approach of experimental AFM nanoindentation with computational modeling is proposed, taking into account complex material behavior. Three constitutive models (porohyperelastic, viscohyperelastic, poroviscohyperelastic) in tandem with optimization algorithms were employed to capture the experimental stress relaxation data of chondrocytes at 5 % strain. The poroviscohyperelastic models with and without fluid flow allowed through the cell membrane provided excellent description of the experimental time-dependent cell responses (normalized mean squared error (NMSE) of 0.003 between the model and experiments). The viscohyperelastic model without fluid could not follow the entire experimental data that well (NMSE = 0.005), while the porohyperelastic model could not capture it at all (NMSE = 0.383). We also show by parametric analysis that the fluid flow has a small, but essential effect on the loading phase and short-term cell relaxation response, while the solid viscoelasticity controls the longer-term responses. We suggest that the local time-dependent cell mechanical response is determined by the combined effects of intrinsic viscoelasticity of the cytoskeleton and fluid flow redistribution in the cells, although the contribution of fluid flow is smaller when using a nanosized probe and moderate indentation rate. The present approach provides new insights into viscoelastic responses of chondrocytes, important for further understanding cell mechanobiological mechanisms in health and disease.
|
|
| 2. |
- Lammi, Mikko, 1961-, et al.
(författare)
-
Undersulfated chondroitin sulfate does not increase in osteoarthritic cartilage.
- 2004
-
Ingår i: Journal of Rheumatology. - : Journal of Rheumatology. - 0315-162X .- 1499-2752. ; 31:12, s. 2449-2453
-
Tidskriftsartikel (refereegranskat)abstract
- OBJECTIVE: To test whether there is undersulfation of chondroitin sulfate in osteoarthritic bovine articular cartilage to support the hypothesis that sulfate deficiency is involved with the development of osteoarthritis.METHODS: Cartilage samples from bovine patellae (n = 32) were divided into 3 groups based on their osteoarthritic progression, as assessed by modified Mankin score. Uronic acid contents of the samples were determined. Fragmentation of the proteoglycans due to proteolytic processing was estimated with agarose gel electrophoresis. The molar ratios of chondroitin sulfate isoforms in the extracted proteoglycans were determined with fluorophore-assisted carbohydrate electrophoresis.RESULTS: Loss of proteoglycans and accumulation of tissue water was evident in groups II and III, and progressive OA increased heterogeneity of aggrecan population in groups II and III. Importantly, the molar ratio of nonsulfated disaccharide was decreased in the osteoarthritic articular cartilage.CONCLUSION: The structure of chondroitin sulfate in degenerated bovine cartilage did not support the hypothesis that sulfate depletion is present in osteoarthritic joint.
|
|
| 3. |
- Pulkkinen, Hertta, et al.
(författare)
-
Cellulose sponge as a scaffold for cartilage tissue engineering.
- 2006
-
Ingår i: Bio-medical materials and engineering. - : IOS Press. - 0959-2989 .- 1878-3619. ; 16:4 Suppl, s. S29-S35
-
Tidskriftsartikel (refereegranskat)abstract
- One goal of functional tissue engineering is to manufacture scaffolds infiltrated with chondrocytes which are suitable for transplantation into the lesion areas of articular cartilage. Various research strategies are used to fabricate cartilage transplants which would have the correct phenotype, contain enough extracellular matrix components, and have structural and biomechanical properties equivalent to normal articular cartilage. We have investigated the suitability of viscose cellulose sponges as a scaffold for cartilage tissue engineering. The sponges were tested alone, or with recombinant human type II collagen cross-linked inside the material. Scanning electron microscopy and confocal microscopy were used to study the structure of the scaffold during four weeks of cultivation. Cellulose and cellulose/recombinant type II collagen sponges were biocompatible for at least four weeks in cultivation, and gradual filling of the scaffold was observed. However, the constructs remained soft during the observation period, and were devoid of extracellular matrix composition typical for normal articular cartilage.
|
|
| 4. |
- Saarakkala, Simo, et al.
(författare)
-
Ultrasound indentation of normal and spontaneously degenerated bovine articular cartilage.
- 2003
-
Ingår i: Osteoarthritis and Cartilage. - : Saunders Elsevier. - 1063-4584 .- 1522-9653. ; 11:9, s. 697-705
-
Tidskriftsartikel (refereegranskat)abstract
- OBJECTIVE: We have previously developed a handheld ultrasound indentation instrument for the diagnosis of cartilage degeneration. The instrument has been demonstrated to be capable of quantifying mechanical and acoustic properties of enzymatically degraded and normal bovine articular cartilage in vitro and in situ. The aim of this study was to investigate the sensitivity of the instrument to distinguish between normal and spontaneously degenerated (e.g., in osteoarthrosis) articular cartilage in vitro.DESIGN: Thirty articular cartilage samples were prepared from the bovine lateral patellae: 19 patellae with different degenerative stages and 11 patellae with visually normal appearance. Cartilage thickness, stiffness (dynamic modulus) and ultrasound reflection from the cartilage surface were measured with the handheld instrument. Subsequently, biomechanical, histological and biochemical reference measurements were conducted.RESULTS: Reproducibility of the measurements with the ultrasound indentation instrument was good. Standardized coefficient of variation was < or =6.1% for thickness, dynamic modulus and reflection coefficient. Linear correlation between the dynamic modulus, measured with the ultrasound indentation instrument, and the reference dynamic modulus was high (r=0.993, n=30, P<0.05). Ultrasound reflection coefficient, as determined from the cartilage surface, showed high linear correlations (typically r(2)>0.64, n=30, P<0.05) with the cartilage composition and histological or mechanical properties. The instrument was superior compared to visual evaluation in detecting tissue degeneration.CONCLUSION: This study indicates that the ultrasound indentation technique and instrument may significantly improve the early diagnosis of cartilage degeneration. The results revealed that visual evaluation is insensitive for estimating the structural and mechanical properties of articular cartilage at the initial stages of degeneration.
|
|
| 5. |
- Töyräs, Juha, et al.
(författare)
-
Speed of sound in normal and degenerated bovine articular cartilage.
- 2003
-
Ingår i: Ultrasound in Medicine and Biology. - : Elsevier. - 0301-5629 .- 1879-291X. ; 29:3, s. 447-454
-
Tidskriftsartikel (refereegranskat)abstract
- The unknown and variable speed of sound may impair accuracy of the acoustic measurement of cartilage properties. In this study, relationships between the speed of sound and cartilage composition, mechanical properties and degenerative state were studied in bovine knee and ankle cartilage (n = 62). Further, the effect of speed variation on the determination of cartilage thickness and stiffness with ultrasound (US) indentation was numerically simulated. The speed of sound was significantly (n = 32, p < 0.05) dependent on the cartilage water content (r = -0.800), uronic acid content (per wet weight, r = 0.886) and hydroxyproline content (per wet weight, r = 0.887, n = 28), Young's modulus at equilibrium (r = 0.740), dynamic modulus (r = 0.905), and degenerative state (i.e., Mankin score) (r = -0.727). In addition to cartilage composition, mechanical and acoustic properties varied significantly between different anatomical locations. In US indentation, cartilage is indented with a US transducer. Deformation and thickness of tissue are calculated using a predefined speed of sound and used in determination of dynamic modulus. Based on the simulations, use of the mean speed of sound of 1627 m/s (whole material) induced a maximum error of 7.8% on cartilage thickness and of 6.2% on cartilage dynamic modulus, as determined with the US indentation technique (indenter diameter 3 mm). We believe that these errors are acceptable in clinical US indentation measurements.
|
|
