| 1. |
|
|
| 2. |
-
- 2019
-
Tidskriftsartikel (refereegranskat)
|
|
| 3. |
|
|
| 4. |
- Arheimer, Berit, et al.
(författare)
-
The IAHS Science for Solutions decade, with Hydrology Engaging Local People IN a Global world (HELPING)
- 2024
-
Ingår i: Hydrological Sciences Journal. - 0262-6667 .- 2150-3435.
-
Tidskriftsartikel (refereegranskat)abstract
- The new scientific decade (2023-2032) of the International Association of Hydrological Sciences (IAHS) aims at searching for sustainable solutions to undesired water conditions - may it be too little, too much or too polluted. Many of the current issues originate from global change, while solutions to problems must embrace local understanding and context. The decade will explore the current water crises by searching for actionable knowledge within three themes: global and local interactions, sustainable solutions and innovative cross-cutting methods. We capitalise on previous IAHS Scientific Decades shaping a trilogy; from Hydrological Predictions (PUB) to Change and Interdisciplinarity (Panta Rhei) to Solutions (HELPING). The vision is to solve fundamental water-related environmental and societal problems by engaging with other disciplines and local stakeholders. The decade endorses mutual learning and co-creation to progress towards UN sustainable development goals. Hence, HELPING is a vehicle for putting science in action, driven by scientists working on local hydrology in coordination with local, regional, and global processes.
|
|
| 5. |
- Gao, Xindi, et al.
(författare)
-
Cryptococcal Hsf3 controls intramitochondrial ROS homeostasis by regulating the respiratory process
- 2022
-
Ingår i: Nature Communications. - : Springer Science and Business Media LLC. - 2041-1723. ; 13:1
-
Tidskriftsartikel (refereegranskat)abstract
- Mitochondrial quality control prevents accumulation of intramitochondrial-derived reactive oxygen species (mtROS), thereby protecting cells against DNA damage, genome instability, and programmed cell death. However, underlying mechanisms are incompletely understood, particularly in fungal species. Here, we show that Cryptococcus neoformans heat shock factor 3 (CnHsf3) exhibits an atypical function in regulating mtROS independent of the unfolded protein response. CnHsf3 acts in nuclei and mitochondria, and nuclear- and mitochondrial-targeting signals are required for its organelle-specific functions. It represses the expression of genes involved in the tricarboxylic acid cycle while promoting expression of genes involved in electron transfer chain. In addition, CnHsf3 responds to multiple intramitochondrial stresses; this response is mediated by oxidation of the cysteine residue on its DNA binding domain, which enhances DNA binding. Our results reveal a function of HSF proteins in regulating mtROS homeostasis that is independent of the unfolded protein response.
|
|
| 6. |
- Huang, Tao, et al.
(författare)
-
Uplink Tx Switching Application Optimization Based on XGBoost Algorithm
- 2023
-
Ingår i: Lecture Notes in Electrical Engineering. - Singapore : Springer Nature Singapore. - 1876-1119 .- 1876-1100. ; 996 LNEE, s. 1121-1129
-
Konferensbidrag (refereegranskat)abstract
- Uplink Tx Switching is an important technology in multi-frequency cooperation, which can effectively improve the uplink capacity of the network by switching the uplink transmitting antenna of the terminal to realize the time-division uplink transmission of two carriers. The paper analyzes the technical principle and implementation of Uplink Tx Switching and compares the characteristics of SUL-based and UL CA-based schemes. Then it introduces an intelligent scheme to turn on Uplink Tx Switching when uplink capacity enhancement is required. The paper uses XGBoost Model to predict the uplink PRB utilization of the serving carriers when the uplink PRB utilization of the serving carrier is higher than the threshold, the target station turns on Uplink Tx Switching while the secondary carrier selection is also based on the uplink PRB utilization of the candidate carriers. Finally, the validity of XGBoost prediction is verified by the actual operation data in Hangzhou.
|
|
| 7. |
|
|
| 8. |
- Jiang, Bing-Xin, et al.
(författare)
-
Fabrication and bonding of In bumps on Micro-LED with 8 μ m pixel pitch
- 2024
-
Ingår i: ENGINEERING RESEARCH EXPRESS. - 2631-8695. ; 6:2
-
Tidskriftsartikel (refereegranskat)abstract
- Indium (In) is currently used to fabricate metal bumps on micro-light-emitting diode (Micro-LED) chips due to its excellent physical properties. However, as Micro-LED pixel size and pitch decrease, achieving high-quality In bumps on densely packed Micro-LED chips often presents more challenges. This paper describes the process of fabricating In bumps on micro-LEDs using thermal evaporation, highlighting an issue where In tends to grow laterally within the photoresist pattern, ultimately blocking the pattern and resulting in undersized and poorly dense In bumps on the Micro-LED chip. To address this issue, we conducted numerous experiments to study the height variation of In bumps within a range of photoresist aperture sizes (3 mu m -7 mu m) under two different resist thickness conditions (3.8 mu m and 4.8 mu m). The results showed that the resist thickness had a certain effect on the height of In bumps on the Micro-LED chip electrodes. Moreover, we found that, with the photoresist pattern size increasing under constant resist thickness conditions, the height and quality of the bumps significantly improved. Based on this finding, we rationalized the adjustment of the photoresist pattern size within a limited emission platform range to compensate for the height difference of In bumps caused by different resist thicknesses between the cathode and anode regions. Consequently, well-shaped and dense In bumps with a maximum height of up to 4.4 mu m were fabricated on 8 mu m pitch Micro-LED chips. Afterwards, we bonded the Micro-LED chip with indium bumps to the CMOS chip, and we found that we could successfully control the CMOS chip to drive the Micro-LED chip to display specific characters through the Flexible Printed Circuit (FPC). This work is of significant importance for the fabrication of In bumps on Micro-LED chips with pitches below 10 mu m and subsequent bonding processes.
|
|
| 9. |
- Lan, Meng, et al.
(författare)
-
Highly redispersible CNT dough for better processiblity
- 2023
-
Ingår i: Journal of Materials Science & Technology. - : Elsevier BV. - 1005-0302. ; 152, s. 65-74
-
Tidskriftsartikel (refereegranskat)abstract
- Carbon nanotubes (CNTs) have received considerable attention for their excellent thermal and electrical conductivity as well as scalable production. However, CNT dispersions are prone to settling and have a short shelf time, especially under high concentration, which significantly hinders their further processing and increases transportation costs. Here, we report a highly concentrated CNT dough enabled by ionic liquid crystal (ILC) as auxiliaries. Benefiting from the temperature-controlled physical transformation of the ILC, the CNTs of the powder state are successfully transferred to highly processable dough with excellent electrical conductivity, flame retardancy, and outstanding redispersibility even after 180 days of storage. In particular, the CNT dough exhibits excellent self-healing properties and good reshapable capability. Various bulk form CNT derived from the ILC armored CNT dough are realized by facile processing technique. Hybrid nanocomposite papers with ANF nanofiber exhibited excellent photothermal conversion and Joule heating properties. The redispersible CNT doughs presented here promise to revolutionize traditional CNT powder and dispersions as the primary raw material for building CNT-based architectures and facilitate the large-scale application of CNTs.
|
|
| 10. |
- Li, Chenglei, et al.
(författare)
-
Room-temperature direct regeneration of spent LiFePO4 cathode using the external short circuit strategy
- 2023
-
Ingår i: Next Sustainability. - : Elsevier. - 2949-8236.
-
Tidskriftsartikel (refereegranskat)abstract
- Lithium iron phosphate batteries (LFP), widely used as power sources, are forecasted to reach the terawatt-hour scale, inevitably leading to battery waste and expediating the urgency for effective recycling processes for LFP. The modern recycling methodologies based on material recovery face significant economic, environmental, and energy consumption challenges. This research attempts to resolve these challenges by providing direct cathode regeneration based on the principles of an external short-circuit to replenish lithium lost in the spent cathode with lithiated materials (LiC6, Li metal). Given that most active lithium loss in the cathode is caused by the growth of the solid electrolyte interphase rather than structural damage, restoring the lost lithium can revitalize a spent cathode battery’s electrochemical performance to a near-original state. The lithium loss in LFP cathodes ranging from 20% to 80% was renewed by supplementing lithium. Relithiation of 10Ah commercial LFP spent cathode showed revitalized electrochemical performance. Compared to the modern recycling methods, direct cathode regeneration improves the economic benefits of recycling by 33%, decreases energy consumption by 48%, and reduces carbon emissions by 62%. Direct cathode regeneration provides a scaffold for the next generation of recycling methods to improve recycling efficiency while reducing their environmental footprint.
|
|
