| 1. |
- Edstrom, K., et al.
(författare)
-
The NordBatt Conferences: The Journey so Far and the Future Ahead
- 2023
-
Ingår i: Batteries and Supercaps. - 2566-6223. ; 6:11
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- All great things have humble beginnings. In 2013 when NordBatt started, we had no lithium-ion battery manufacturing in the Nordic countries and we had rather few EVs on the roads, although things were clearly starting to move – Tesla Model S in fact topped the monthly new car sales of Norway in September that very year. Yet, even if the field was advancing and lively, relatively few Nordic research groups were doing any kind of battery R&D. Now, in 2023, almost everything is different; batteries and “electrify everything” are seen, not only by us, as the next industrial revolution – it is a topic gathering considerably many more actors in academia as well as in the whole ecosystem of batteries.
|
|
| 2. |
- Laisné, Ewen, et al.
(författare)
-
Box-Behnken design for the synthesis optimization of mesoporous sulfur-doped carbon-based materials from birch waste : promising candidates for environmental and energy storage application
- 2024
-
Ingår i: Colloids and Surfaces A. - : Elsevier. - 0927-7757 .- 1873-4359. ; 692
-
Tidskriftsartikel (refereegranskat)abstract
- The development of biomass-based carbon materials has accelerated the research interest in environmental (e.g., adsorbents for wastewater decontamination) and energy applications (e.g., batteries). In this paper, we developed a series of carbon materials (CMs) using a sulfur doping strategy to improve the physicochemical, adsorptive and energy storage properties of the aforementioned CMs. CMs were prepared and optimized using an experimental design denoted as the Box-Behnken design approach with three independent factors (i.e., the temperature of pyrolysis, zinc chloride: biomass ratio and sulfur: biomass ratio), and the responses were evaluated, namely the Specific Surface Area (SBET), mesopore area (AMeso) and micropore area (AMicro) with the help of Nitrogen Physisorption. According to the statistical analysis, under the studied conditions, the responses were mainly influenced by the pyrolysis temperature and ZnCl2 ratio, while the sulfur content did not give rise to any remarkable differences in the selected responses. The physicochemical characterization of the CMs suggested that very high Specific Surface Areas ranging from 1069 to 1925 m2 g−1 were obtained. The sulfur doping resulted in up to 7.33wt.% of sulfur in the CM structure, which yielded CMs with more defects and hydrophilic surfaces. When tested as adsorbents, CMs exhibited a very high adsorption capacity (190 – 356mgg-1), and as anodes, they demonstrated a competitive Lithium Ion Battery (LIB) storage capacity, at least during the first five cycles (306 mAhg-1 at 1C for CM9). However, further studies on long-term cyclability are required to prove the CM materials suitability in LIBs. This work extends our understanding of how pyrolysis and sulfur doping of biomass feedstock affects carbon materials' usability, final characteristics and potential to use in wastewater decontamination by adsorption and as anodes in LIBs.
|
|
| 3. |
- Li, Jiajia, et al.
(författare)
-
Recent Applications of Ionic Liquids in Quasi-Solid-State Lithium Metal Batteries
- 2021
-
Ingår i: Green Chemical Engineering. - : Elsevier. - 2666-9528. ; 2:3, s. 253-265
-
Forskningsöversikt (refereegranskat)abstract
- Quasi-solid-state lithium metal batteries are considered as one of the most promising energy storage devices, and the application of ionic liquids (ILs) as a new generation of functionalized electrolyte components in lithium metal batteries has become one of the research focuses. In this review, the very recent research work related to using IL to develop quasi-solid-state electrolytes and their influences on the performances of quasi-solid-state lithium metal batteries were surveyed and summarized, suggesting that the introduction of ILs can improve the ionic conductivity, broaden the electrochemical stability window, and enhance the electrochemical stability of selected electrolytes. Moreover, using ILs to prepare high-performance electrodes with unique microstructures and uniform distribution of fillers were also introduced. The composite quasi-solid-state electrolytes were suggested as the mainstream of electrolytes in the future due to the combination of the advantages of inorganic and polymer quasi-solid-state electrolytes, and their development challenges in high energy and high safety quasi-solid-state lithium metal batteries were also discussed.
|
|
| 4. |
- Simões Dos Reis, Glaydson, et al.
(författare)
-
Preparation and characterization of pulp and paper mill sludge-activated biochars using alkaline activation : a Box-Behnken design approach
- 2022
-
Ingår i: ACS Omega. - : American Chemical Society (ACS). - 2470-1343. ; 7:36, s. 32620-32630
-
Tidskriftsartikel (refereegranskat)abstract
- This study utilized pulp and paper mill sludge as a carbon source to produce activated biochar adsorbents. The response surface methodology (RSM) application for predicting and optimizing the activated biochar preparation conditions was investigated. Biochars were prepared based on a Box-Behnken design (BBD) approach with three independent factors (i.e., pyrolysis temperature, holding time, and KOH:biomass ratio), and the responses evaluated were specific surface area (SSA), micropore area (Smicro), and mesopore area (Smeso). According to the RSM and BBD analysis, a pyrolysis temperature of 800 °C for 3 h of holding and an impregnation ratio of 1:1 (biomass:KOH) are the optimum conditions for obtaining the highest SSA (885 m2 g-1). Maximized Smicro was reached at 800 °C, 1 h and the ratio of 1:1, and for maximizing Smeso (569.16 m2 g-1), 800 °C, 2 h and ratio 1:1.5 (445-473 m2 g-1) were employed. The biochars presented different micro- and mesoporosity characteristics depending on pyrolysis conditions. Elemental analysis showed that biochars exhibited high carbon and oxygen content. Raman analysis indicated that all biochars had disordered carbon structures with structural defects, which can boost their properties, e.g., by improving their adsorption performances. The hydrophobicity-hydrophilicity experiments showed very hydrophobic biochar surfaces. The biochars were used as adsorbents for diclofenac and amoxicillin. They presented very high adsorption performances, which could be explained by the pore filling, hydrophobic surface, and π-πelectron-donor-acceptor interactions between aromatic rings of both adsorbent and adsorbate. The biochar with the highest surface area (and highest uptake performance) was subjected to regeneration tests, showing that it can be reused multiple times.
|
|
| 5. |
- Suopajärvi, Hannu, et al.
(författare)
-
Use of biomass in integrated steelmaking – Status quo, future needs and comparison to other low-CO2 steel production technologies
- 2018
-
Ingår i: Applied Energy. - : Elsevier BV. - 0306-2619 .- 1872-9118. ; 213, s. 384-407
-
Tidskriftsartikel (refereegranskat)abstract
- This paper provides a fundamental and critical review of biomass application as a reducing agent and fuel in integrated steelmaking. The basis for the review is derived from the current process and product quality requirements that also biomass-derived fuels should fulfill. The availability and characteristics of different sources of biomass are discussed and suitable pretreatment technologies for their upgrading are evaluated. The existing literature concerning biomass application in bio-coke making, blast furnace injection, iron ore sintering and production of carbon composite agglomerates is reviewed and research gaps filled by providing insights and recommendations to the unresolved challenges. Several possibilities to integrate the production of biomass-based reducing agents with existing industrial infrastructures to lower the cost and increase the total efficiency are given. A comparison of technical challenges and CO2 emission reduction potential between biomass-based steelmaking and other emerging technologies to produce low-CO2 steel is made.
|
|
