| 1. |
- Echelmeier, A., et al.
(författare)
-
Segmented flow generator for serial crystallography at the European X-ray free electron laser
- 2020
-
Ingår i: Nature Communications. - : Nature Research. - 2041-1723. ; 11:1
-
Tidskriftsartikel (refereegranskat)abstract
- Serial femtosecond crystallography (SFX) with X-ray free electron lasers (XFELs) allows structure determination of membrane proteins and time-resolved crystallography. Common liquid sample delivery continuously jets the protein crystal suspension into the path of the XFEL, wasting a vast amount of sample due to the pulsed nature of all current XFEL sources. The European XFEL (EuXFEL) delivers femtosecond (fs) X-ray pulses in trains spaced 100 ms apart whereas pulses within trains are currently separated by 889 ns. Therefore, continuous sample delivery via fast jets wastes >99% of sample. Here, we introduce a microfluidic device delivering crystal laden droplets segmented with an immiscible oil reducing sample waste and demonstrate droplet injection at the EuXFEL compatible with high pressure liquid delivery of an SFX experiment. While achieving ~60% reduction in sample waste, we determine the structure of the enzyme 3-deoxy-D-manno-octulosonate-8-phosphate synthase from microcrystals delivered in droplets revealing distinct structural features not previously reported.
|
|
| 2. |
|
|
| 3. |
- Marras, A., et al.
(författare)
-
Development of CoRDIA : An Imaging Detector for next-generation Synchrotron Rings and Free Electron Lasers
- 2022
-
Ingår i: Journal of Physics. - : Institute of Physics (IOP).
-
Konferensbidrag (refereegranskat)abstract
- An x-ray imager is being developed for use in diffraction-limited synchrotron rings and continuous wave free electron lasers. The imager is named CoRDIA (COntinuous Readout Digitising Imager Array) and aims at achieving continuous operation at a frame rate in excess of 100kHz. Other goals include single-photon sensitivity at 12 keV (or below), a full well in excess of 10k photon/pixel/image, and a 100μm pixel pitch. The detector ASIC will be compatible with multiple sensor materials to cover different energy ranges. Exploratory prototypes of the readout ASIC (basic circuital blocks) have been manufactured in TSMC 65nm technology: they are presently under test.
|
|
| 4. |
- Graafsma, Heinz, et al.
(författare)
-
Detector developments for photon science at DESY
- 2023
-
Ingår i: Frontiers in Physics. - : Frontiers Media SA. - 2296-424X. ; 11
-
Tidskriftsartikel (refereegranskat)abstract
- The past, current and planned future developments of X-ray imagers in the Photon-Science Detector Group at DESY-Hamburg is presented. the X-ray imagers are custom developed and tailored to the different X-ray sources in Hamburg, including the storage ring PETRA III/IV; the VUV-soft X-ray free electron laser FLASH, and the European Free-Electron Laser. Each source puts different requirements on the X-ray detectors, which is described in detail, together with the technical solutions implemented.
|
|
| 5. |
- Klačková, I., et al.
(författare)
-
Five years operation experience with the AGIPD detectors at the European XFEL
- 2023
-
Ingår i: Proceedings of SPIE - The International Society for Optical Engineering. - : SPIE - International Society for Optical Engineering. - 9781510662827
-
Konferensbidrag (refereegranskat)abstract
- The European X-ray Free Electron Laser (EuXFEL) began its user operation five years ago, opening and offering new research possibilities. The facility delivers high brilliance, ultra-short, spatially coherent X-ray pulses with a high repetition rate to six instruments (FXE, SPB/SFX, MID, HED, SCS and SQS) by means of three different beamlines (SASE 1, SASE 2 and SASE 3). One of the first detectors used for early-stage experiments was the Adaptive Gain Integrating Pixel Detector (AGIPD), custom designed to meet the challenging needs of scientific instruments. The AGIPD is a megahertz-rate integrating hybrid megapixel camera with a per-pixel adaptive gain amplification, allowing the integration of up to 104 of 12 keV photons per pixel in its low gain stage. Currently, three scientific instruments, namely SPB/SFX, MID and HED employ the AGIPD systems, the latter mentioned using a prototype, half-megapixel camera with an upgraded version of readout ASICs. The AGIPDs at EuXFEL are successfully used for experimental techniques like serial femtosecond crystallography, MHz single particle imaging, MHz X-ray photon correlation spectroscopy or MHz diffraction of materials under high pressures in a diamond anvil cell. Since September 2017, the AGIPD is continuously used and has become an established detector technology, with further advancements and developments planned. Delivering quality experimental data requires reliable and reproducible detector characterisation and calibration that have to be performed regularly with a continuous improvement of correction methods in close collaboration with scientific instruments. This work summarises five years of experience operating the AGIPD detectors at the EuXFEL scientific instruments. It gives an overview of scientific capabilities and examples of successful studies performed with AGIPD detectors. Moreover, challenges concerning detector calibration and characterisation are presented.
|
|
| 6. |
- Sztuk-Dambietz, J., et al.
(författare)
-
Operational experience with Adaptive Gain Integrating Pixel Detectors at European XFEL
- 2024
-
Ingår i: Frontiers in Physics. - : Frontiers Media SA. - 2296-424X. ; 11
-
Forskningsöversikt (refereegranskat)abstract
- The European X-ray Free Electron Laser (European XFEL) is a cutting-edge user facility that generates per second up to 27,000 ultra-short, spatially coherent X-ray pulses within an energy range of 0.26 to more than 20 keV. Specialized instrumentation, including various 2D X-ray detectors capable of handling the unique time structure of the beam, is required. The one-megapixel AGIPD (AGIPD1M) detectors, developed for the European XFEL by the AGIPD Consortium, are the primary detectors used for user experiments at the SPB/SFX and MID instruments. The first AGIPD1M detector was installed at SPB/SFX when the facility began operation in 2017, and the second one was installed at MID in November 2018. The AGIPD detector systems require a dedicated infrastructure, well-defined safety systems, and high-level control procedures to ensure stable and safe operation. As of now, the AGIPD1M detectors installed at the SPB/SFX and MID experimental end stations are fully integrated into the European XFEL environment, including mechanical integration, vacuum, power, control, data acquisition, and data processing systems. Specific high-level procedures allow facilitated detector control, and dedicated interlock systems based on Programmable Logic Controllers ensure detector safety in case of power, vacuum, or cooling failure. The first 6 years of operation have clearly demonstrated that the AGIPD1M detectors provide high-quality scientific results. The collected data, along with additional dedicated studies, have also enabled the identification and quantification of issues related to detector performance, ensuring stable operation. Characterization and calibration of detectors are among the most critical and challenging aspects of operation due to their complex nature. A methodology has been developed to enable detector characterization and data correction, both in near real-time (online) and offline mode. The calibration process optimizes detector performance and ensures the highest quality of experimental results. Overall, the experience gained from integrating and operating the AGIPD detectors at the European XFEL, along with the developed methodology for detector characterization and calibration, provides valuable insights for the development of next-generation detectors for Free Electron Laser X-ray sources.
|
|
| 7. |
- Jo, W., et al.
(författare)
-
Nanosecond X-ray photon correlation spectroscopy using pulse time structure of a storage-ring source
- 2021
-
Ingår i: IUCrJ. - : International Union of Crystallography. - 2052-2525. ; 8, s. 124-130
-
Tidskriftsartikel (refereegranskat)abstract
- X-ray photon correlation spectroscopy (XPCS) is a routine technique to study slow dynamics in complex systems at storage-ring sources. Achieving nanosecond time resolution with the conventional XPCS technique is, however, still an experimentally challenging task requiring fast detectors and sufficient photon flux. Here, the result of a nanosecond XPCS study of fast colloidal dynamics is shown by employing an adaptive gain integrating pixel detector (AGIPD) operated at frame rates of the intrinsic pulse structure of the storage ring. Correlation functions from single-pulse speckle patterns with the shortest correlation time of 192 ns have been calculated. These studies provide an important step towards routine fast XPCS studies at storage rings. © 2021.
|
|
| 8. |
- Marras, A., et al.
(författare)
-
Development of the Continuous Readout Digitising Imager Array detector
- 2024
-
Ingår i: Journal of Instrumentation. - : IOP Publishing. - 1748-0221. ; 19:3
-
Tidskriftsartikel (refereegranskat)abstract
- The CoRDIA project aims to develop an X-ray imager capable of continuous operation in excess of 100 kframe/s. The goal is to provide a suitable instrument for Photon Science experiments at diffraction-limited Synchrotron Rings and Free Electron Lasers considering Continuous Wave operation. Several chip prototypes were designed in a 65 nm process: in this paper we will present an overview of the challenges and solutions adopted in the ASIC design.
|
|
| 9. |
- Mezza, D., et al.
(författare)
-
Calibration methods for charge integrating detectors
- 2022
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 1024
-
Tidskriftsartikel (refereegranskat)abstract
- Since the introduction of the extremely intense X-ray free electron lasers, the need for low noise, high dynamic range and potentially fast charge integrating detectors has increased significantly. Among all the problems that research and development groups have to face in the development of such detectors, their calibration represents one of the most challenging and the collaboration between the detector development and user groups is of fundamental importance. The main challenge is to develop a calibration suite that is capable to test the detector over a wide dynamic range, with a high granularity and a very high linearity, together with a certain radiation tolerance and the possibility to well define the timings and the synchronization with the detector. Practical considerations have also to be made like the possibility to calibrate the detector in a reasonable time, the availability of the calibration source at the experimental place and so on. Such a calibration test suite is often not represented by a single source but by several sources that can cover different parts of the dynamic range and that need to be cross calibrated to have a final calibration curve. In this respect an essential part of the calibration is also to develop a mathematical model that allows calibrating the entire dynamic range, taking into account features that are calibration source and/or detector specific. The aim of this contribution is to compare the calibration for the AGIPD detector using several calibration sources such as internal current source, backside pulsing, IR pulsed laser, LED light and mono-energetic protons. The mathematical procedure used to calibrate the different sources will be discussed in great detail showing how to take into account a few shortcomings (like pixel coupling) that are common for many charge integrating detectors. This work has been carried out in the frame of the AGIPD project for the European X-ray Free Electron Laser.
|
|
| 10. |
- Mezza, D., et al.
(författare)
-
Characterization of the AGIPD1.1 readout chip and improvements with respect to AGIPD1.0
- 2019
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier BV. - 0168-9002 .- 1872-9576. ; 945
-
Tidskriftsartikel (refereegranskat)abstract
- AGIPD, the Adaptive Gain Integrating Pixel Detector, is a hybrid detector with a frame rate of 4.5 MHz, a dynamic range up to 104⋅ 12.4 keV photons, as well as single photon resolution, developed for the European XFEL (Eu.XFEL). The final 1 Mpixel detector system consists of 16 tiled modules each one with 16 readout chips. The single ASIC is 64 x 64 pixels, each with a size of 200 x 200 μm2. Each pixel can store up to 352 images. This work is focused on the characterization of AGIPD1.1, the second version of the full scale ASIC, and the improvements with respect to AGIPD1.0. From the measurements presented in this paper we show that the flaws observed in AGIPD1.0 (i.e. ghosting, crosstalk, slow readout speed) have been fixed in AGIPD1.1. In addition the main performance parameters such as noise, dynamic range and so on were measured for the new version of the ASIC and will be summarized.
|
|
