| 1. |
- Shin, Sung-Ho, et al.
(författare)
-
Ion-conductive self-healing hydrogels based on an interpenetrating polymer network for a multimodal sensor
- 2019
-
Ingår i: Chemical Engineering Journal. - : ELSEVIER SCIENCE SA. - 1385-8947 .- 1873-3212. ; 371, s. 452-460
-
Tidskriftsartikel (refereegranskat)abstract
- Conductive self-healing polymer hydrogel and related soft sensor devices are receiving considerable attention from academia to industry because of their impacts on the lifetime and ergonomic design of soft robotics, prosthesis, and health monitoring systems. However, the development of such a material has thus far been limited considering performances and accessibility. Herein, robustness, self-healing, and conductivity for soft electronic skin are realized by an interpenetrating polymer network (IPN) system based on chemical/ionic cross-inked poly(acrylic acid) containing ferric ions, intercalated with physically cross-linked poly(vinyl alcohol). This IPN hydrogel successfully satisfies all three aforementioned capabilities; elongation at break greater than 1400%; recovery to original mechanical properties greater than 80% after 24 h; and 0.14 Sm-1 of ionic conductivity, which is electrically healable. Such ionic conductivity of hydrogels enables multimodal sensing capabilities, i.e., for strain, pressure, and temperature. Particularly, a uniquely designed dual sensor attached to a finger simultaneously detects mechanical folding and pressure changes independently and can undergo large deformation 1000 times repeated and heating up to 90 degrees C.
|
|
| 2. |
- Koo, Jun Mo, et al.
(författare)
-
Nonstop Monomer-to-Aramid Nanofiber Synthesis with Remarkable Reinforcement Ability
- 2019
-
Ingår i: Macromolecules. - : American Chemical Society (ACS). - 0024-9297 .- 1520-5835. ; 52:3, s. 923-934
-
Tidskriftsartikel (refereegranskat)abstract
- Aramid nanofibers (ANFs), typically produced by exfoliating aramid microfibers (Kevlar) in alkaline media, exhibit excellent mechanical properties and have therefore attracted increased attention as nanoscale building blocks. However, the preparation of aramid microfibers involves laborious and hazardous processes, which limits the industrial-scale use of ANFs. This work describes a facile and direct monomer-to-ANF synthesis via an as-synthesized intermediate low-molecular-weight poly(p-phenylene terephthalamide) (PPTA) without requiring the environmentally destructive acids and high-order shearing processes. Under the employed conditions, PPTA immediately dissociates and self-assembles into ANFs within a time period of 15 h, which is much shorter than the time of 180 h (not including the Kevlar preparation time) required for the Kevlar-to-ANF conversion. Interestingly, the fabricated ANFs exhibit nanoscale dimensions and thermoplastic polyurethane (TPU) reinforcing effects similar to those of Kevlar-derived ANFs; i.e., a 1.5-fold TPU toughness improvement and a maximum ultimate tensile strength of 84 MPa are achieved at an ANF content of only 0.04 wt %. Remarkable reinforcement ability investigated by comprehensive analytical data comes from ANFs, which disturb ordered hydrogen bonding in hard segments and induce strain hardening along the elongation pathway. Thus, the developed approach paves the way to industrial-scale production of ANFs and related nanocomposites.
|
|
