| 1. |
- Darmadi, Iwan, 1990, et al.
(författare)
-
Bulk-Processed Pd Nanocube-Poly(methyl methacrylate) Nanocomposites as Plasmonic Plastics for Hydrogen Sensing
- 2020
-
Ingår i: ACS Applied Nano Materials. - : American Chemical Society (ACS). - 2574-0970. ; 3:8, s. 8438-8445
-
Tidskriftsartikel (refereegranskat)abstract
- Nanoplasmonic hydrogen sensors are predicted to play a key role in safety systems of the emerging hydrogen economy. Pd nanoparticles are the active material of choice for sensor prototype development due to their ability to form a hydride at ambient conditions, which creates the optical contrast. Here, we introduce plasmonic hydrogen sensors made from a thermoplastic nanocomposite material, that is, a bulk material that can be molded with standard plastic processing techniques, such as extrusion and three-dimensional (3D) printing, while at the same time being functionalized at the nanoscale. Specifically, our plasmonic plastic is composed of hydrogensensitive and plasmonically active Pd nanocubes mixed with a poly(methyl methacrylate) matrix, and we optimize it by characterization from the atomic to the macroscopic level. We demonstrate meltprocessed deactivation-resistant plasmonic hydrogen sensors, which retain full functionality even after SO weeks. From a wider perspective, we advertise plasmonic plastic nanocomposite materials for application in a multitude of active plasmonic technologies since they provide efficient scalable processing and almost endless functional material design opportunities via tailored polymer- colloidal nanocrystal combinations.
|
|
| 2. |
- Darmadi, Iwan, 1990, et al.
(författare)
-
Bulk-Processed Plasmonic Plastic Nanocomposite Materials for Optical Hydrogen Detection
- 2023
-
Ingår i: Accounts of Chemical Research. - 0001-4842 .- 1520-4898. ; 56:13, s. 1850-1861
-
Tidskriftsartikel (refereegranskat)abstract
- Conspectus Sensors are ubiquitous, andtheir importanceis only going to increaseacross many areas of modern technology. In this respect, hydrogengas (H-2) sensors are no exception since they allow mitigationof the inherent safety risks associated with mixtures of H-2 and air. The deployment of H-2 technologies is rapidlyaccelerating in emerging energy, transport, and green steel-makingsectors, where not only safety but also process monitoring sensorsare in high demand. To meet this demand, cost-effective and scalableroutes for mass production of sensing materials are required. Here,the state-of-the-art often resorts to processes derived from the microelectronicsindustry where surface-based micro- and nanofabrication are the methodsof choice and where (H-2) sensor manufacturing is no exception. In this Account, we discuss how our recent efforts to develop sensorsbased on plasmonic plastics may complement the current state-of-the-art.We explore a new H-2 sensor paradigm, established througha series of recent publications, that combines (i) the plasmonic opticalH(2) detection principle and (ii) bulk-processed nanocompositematerials. In particular, plasmonic plastic nanocomposite sensingmaterials are described that comprise plasmonic H-2-sensitivecolloidally synthesized nanoparticles dispersed in a polymer matrixand enable the additive manufacturing of H-2 sensors ina cost-effective and scalable way. We first discuss the concept ofplasmonic plastic nanocomposite materials for the additive manufacturingof an active plasmonic sensing material on the basis of the threekey components that require individual and concerted optimization:(i) the plasmonic sensing metal nanoparticles, (ii) the surfactant/stabilizermolecules on the nanoparticle surface from colloidal synthesis, and(iii) the polymer matrix. We then introduce the working principleof plasmonic H-2 detection, which relies on the selectiveabsorption of H species into hydride-forming metal nanoparticles that,in turn, induces distinct changes in their optical plasmonic signaturein proportion to the H-2 concentration in the local atmosphere.Subsequently, we assess the roles of the key components of a plasmonicplastic for H-2 sensing, where we have established that(i) alloying Pd with Au and Cu eliminates hysteresis and introducesintrinsic deactivation resistance at ambient conditions, (ii) surfactant/stabilizermolecules can significantly accelerate and decelerate H-2 sorption and thus sensor response, and (iii) polymer coatings acceleratesensor response, reduce the limit of detection (LoD), and enable molecularfiltering for sensor operation in chemically challenging environments.Based on these insights, we discuss the rational development and detailedcharacterization of bulk-processed plasmonic plastics based on glassyand fluorinated matrix polymers and on tailored flow-chemistry-basedsynthesis of Pd and PdAu alloy colloidal nanoparticles with optimizedstabilizer molecules. In their champion implementation, they enablehighly stable H-2 sensors with response times in the 2 srange and an LoD of few 10 ppm of H-2. To put plasmonicplastics in a wider perspective, we also report their implementationusing different polymer matrix materials that can be used for 3D printingand (an)isotropic Au nanoparticles that enable the manufacturing ofmacroscopic plasmonic objects with, if required, dichroic opticalproperties and in amounts that can be readily upscaled. We advertisethat melt processing of plasmonic plastic nanocomposites is a viableroute toward the realization of plasmonic objects and sensors, producedby scalable colloidal synthesis and additive manufacturing techniques.
|
|
| 3. |
- Lerch, Sarah, 1990, et al.
(författare)
-
Robust Colloidal Synthesis of Palladium-Gold Alloy Nanoparticles for Hydrogen Sensing
- 2021
-
Ingår i: ACS Applied Materials & Interfaces. - : American Chemical Society (ACS). - 1944-8252 .- 1944-8244. ; 13:38, s. 45758-45767
-
Tidskriftsartikel (refereegranskat)abstract
- Metal nanoparticles are currently used in a variety of applications, ranging from life sciences to nanoelectronic devices to gas sensors. In particular, the use of palladium nanoparticles is gaining increasing attention due to their ability to catalyze the rapid dissociation of hydrogen, which leads to an excellent response in hydrogen-sensing applications. However, current palladium-nanoparticle-based sensors are hindered by the presence of hysteresis upon hydride formation and decomposition, as this hysteresis limits sensor accuracy. Here, we present a robust colloidal synthesis for palladium-gold alloy nanoparticles and demonstrate their hysteresis-free response when used for hydrogen detection. The obtained colloidal particles, synthesized in an aqueous, room-temperature environment, can be tailored to a variety of applications through changing the size, ratio of metals, and surface stabilization. In particular, the variation of the viscosity of the mixture during synthesis resulted in a highly tunable size distribution and contributed to a significant improvement in size dispersity compared to the state-of-the-art methods.
|
|
| 4. |
- Östergren, Ida, 1991, et al.
(författare)
-
A surface passivated fluorinated polymer nanocomposite for carbon monoxide resistant plasmonic hydrogen sensing
- 2024
-
Ingår i: Journal of Materials Chemistry A. - 2050-7488 .- 2050-7496. ; In Press
-
Tidskriftsartikel (refereegranskat)abstract
- Plasmonic hydrogen sensors are promising safety monitoring devices for the emerging hydrogen economy provided a fast response time and poisoning resistance can be achieved. Nanocomposites composed of palladium nanoparticles embedded in a polymer matrix facilitate rapid hydrogen diffusion if a fluorinated polymer is used, while a denser polymer such as atactic poly(methyl methacrylate) (PMMA) facilitates a high degree of gas selectivity. However, nanocomposites that combine a fast response with poisoning resistance have not yet been realized. Here, these two properties are achieved simultaneously by modifying the surface of a fluorinated polymer nanocomposite with a thin PMMA coating, which functions as a molecular sieve that effectively blocks carbon monoxide. The resulting surface passivated nanocomposite shows a high degree of poisoning resistance without compromising a fast sensing response of 2-3 seconds upon exposure to 100 mbar of hydrogen. The sensor signal and response are preserved over 55 cycles of synthetic air containing 5% hydrogen and 500 ppm of carbon monoxide, indicating that nanocomposites are a viable approach for the realization of robust hydrogen sensors.
|
|
| 5. |
- Östergren, Ida, 1991, et al.
(författare)
-
Highly Permeable Fluorinated Polymer Nanocomposites for Plasmonic Hydrogen Sensing
- 2021
-
Ingår i: ACS Applied Materials & Interfaces. - : American Chemical Society (ACS). - 1944-8252 .- 1944-8244. ; 13:18, s. 21724-21732
-
Tidskriftsartikel (refereegranskat)abstract
- Hydrogen (H2) sensors that can be produced en masse with cost-effective manufacturing tools are critical for enabling safety in the emerging hydrogen economy. The use of melt-processed nanocomposites in this context would allow the combination of the advantages of plasmonic hydrogen detection with polymer technology; an approach which is held back by the slow diffusion of H2 through the polymer matrix. Here, we show that the use of an amorphous fluorinated polymer, compounded with colloidal Pd nanoparticles prepared by highly scalable continuous flow synthesis, results in nanocomposites that display a high H2 diffusion coefficient in the order of 10-5 cm2 s-1. As a result, plasmonic optical hydrogen detection with melt-pressed fluorinated polymer nanocomposites is no longer limited by the diffusion of the H2 analyte to the Pd nanoparticle transducer elements, despite a thickness of up to 100 μm, thereby enabling response times as short as 2.5 s at 100 mbar (10 vol. %) H2. Evidently, plasmonic sensors with a fast response time can be fabricated with thick, melt-processed nanocomposites, which paves the way for a new generation of robust H2 sensors.
|
|
| 6. |
- Chen, Yidong, et al.
(författare)
-
Catalytically active and thermally stable core-shell gold-silica nanorods for CO oxidation
- 2021
-
Ingår i: RSC Advances. - : Royal Society of Chemistry (RSC). - 2046-2069. ; 11:19, s. 11642-11650
-
Tidskriftsartikel (refereegranskat)abstract
- Deactivation based on sintering phenomena is one of the most costly issues for the industrial application of metal nanoparticle catalysts. To address this drawback, mesoporous silica encapsulation is reported as a promising strategy to stabilize metallic nanoparticles towards use in high temperature catalytic applications. These protective shells provide significant structural support to the nanoparticles, while the mesoporosity allows for efficient transport of the reactants to the catalytically active surface of the metallic nanoparticle in the core. Here, we extend the use of gold nanorods with mesoporous silica shells by investigating their stability in the CO oxidation reaction as an example of high temperature gas phase catalysis. Gold nanorods were chosen as the model system due to the availability of a simple, high yield synthesis method for both the metallic nanorods and the mesoporous silica shells. We demonstrate the catalytic activity of gold nanorods with mesoporous silica shells at temperatures up to 350 degrees C over several cycles, as well as the thermal stability up to 500 degrees C, and compare these results to surfactant-stabilized gold nanorods of similar size, which degrade, and lose most of their catalytic activity, before reaching 150 degrees C. These results show that the gold nanorods protected by the mesoporous silica shells have a significantly higher thermal stability than surfactant-stabilized gold nanorods and that the mesoporous silica shell allows for stable catalytic activity with little degradation at high temperatures.
|
|
| 7. |
- Gschneidtner, Tina, 1985, et al.
(författare)
-
Constructing a library of metal and metal-oxide nanoparticle heterodimers through colloidal assembly
- 2020
-
Ingår i: Nanoscale. - : Royal Society of Chemistry (RSC). - 2040-3372 .- 2040-3364. ; 12:20, s. 11297-11305
-
Tidskriftsartikel (refereegranskat)abstract
- Nanoparticle dimers composed of different metals or metal oxides, as well as different shapes and sizes, are of wide interest for applications ranging from nanoplasmonic sensing to nanooptics to biomedical engineering. Shaped nanoparticles, like triangles and nanorods, can be particularly useful in applications due to the strong localized plasmonic hot-spot that forms at the tips or corners. By placing catalytic, but traditionally weakly- or non-plasmonic nanoparticles, such as metal oxides and metals like palladium, in these hot-spots, an enhanced function for sensing, photocatalysis or optical use is predicted. Here, we present an electrostatic colloidal assembly strategy for nanoparticles, incorporating different sizes, shapes and metal or metal oxide compositions into heterodimers with smaller gaps than are achievable using nanofabrication techniques. This versatile method is demonstrated on 14 combinations, including a variety of shaped gold nanoparticles as well as palladium, iron oxide, and titanium oxide nanoparticles. These colloidal nanoparticles are stabilized with traditional surfactants, such as citrate, CTAB, PVP and oleic acid/oleylamines, indicating the wide applicability of our approach. Heterodimers of gold and palladium are further analyzed using cathodoluminescence to demonstrate the tunability of these "plasmonic molecules". Since systematically altering the absorption and emission of the plasmonic nanoparticles dimers is crucial to extending their functionality, and small gap sizes produce the strongest hot-spots, this method indicates that the electrostatic approach to heterodimer assembly can be useful in creating new nanoparticle dimers for many applications.
|
|
| 8. |
- Levin, Sune, 1991, et al.
(författare)
-
Nanofluidic Trapping of Faceted Colloidal Nanocrystals for Parallel Single-Particle Catalysis
- 2022
-
Ingår i: Acs Nano. - : American Chemical Society (ACS). - 1936-0851 .- 1936-086X. ; 16:9, s. 15206-15214
-
Tidskriftsartikel (refereegranskat)abstract
- Catalyst activity can depend distinctly on nano -particle size and shape. Therefore, understanding the structure sensitivity of catalytic reactions is of fundamental and technical importance. Experiments with single-particle resolution, where ensemble-averaging is eliminated, are required to study it. Here, we implement the selective trapping of individual spherical, cubic, and octahedral colloidal Au nanocrystals in 100 parallel nanofluidic channels to determine their activity for fluorescein reduction by sodium borohydride using fluorescence microscopy. As the main result, we identify distinct structure sensitivity of the rate-limiting borohydride oxidation step originating from different edge site abundance on the three particle types, as confirmed by first -principles calculations. This advertises nanofluidic reactors for the study of structure-function correlations in catalysis and identifies nanoparticle shape as a key factor in borohydride-mediated catalytic reactions.
|
|
| 9. |
- Wen, Xin, 1991, et al.
(författare)
-
Synthesis of Palladium Nanodendrites Using a Mixture of Cationic and Anionic Surfactants
- 2020
-
Ingår i: Langmuir. - : American Chemical Society (ACS). - 1520-5827 .- 0743-7463. ; 36:7, s. 1745-1753
-
Tidskriftsartikel (refereegranskat)abstract
- Surfactants are used widely to control the synthesis of shaped noble-metal nanoparticles. In this work, a mixture of hexadecyltrimethylammonium bromide (CTAB), a cationic surfactant; sodium oleate (NaOL), an anionic surfactant; palladium chloride; and a reducing agent were used in the seed-mediated synthesis of palladium nanoparticles. By controlling the surfactant mixture ratio, we initially discovered that palladium nanodendrites with narrow size distribution were formed instead of the traditional nanocubes, synthesized with only CTAB. In order to investigate the optimal ratio to produce Pd nanodendrites with a high yield and narrow size distribution, samples synthesized with multiple molar ratios of the two surfactants were prepared and studied by transmission electron microscopy, dynamic light scattering, conductance, and ultraviolet-visible spectroscopy. We propose that the addition of NaOL alters the arrangement of surfactants on the Pd seed surface, leading to a new pattern of growth and aggregation. By studying the nanodendrite growth over time, we identified the reduction period of Pd2+ ions and the formation period of the nanodendrites. Our further experiments, including the replacement of CTAB with hexadecyltrimethylammonium chloride (CTAC) and the replacement of NaOL with sodium stearate, showed that CTA+ ions in CTAB and OL- ions in NaOL play the main roles in the formation of nanodendrites. The formation of palladium nanodendrites was robust and achieved with a range of temperatures, pH and mixing speeds.
|
|
