| 1. |
- Cuvilas, Carlos Alberto, et al.
(författare)
-
The Characterization of Wood Species from Mozambique as a Fuel
- 2014
-
Ingår i: Energy Sources, Part A. - : Informa UK Limited. - 1556-7036 .- 1556-7230. ; 36:8, s. 851-857
-
Tidskriftsartikel (refereegranskat)abstract
- The efficient utilization of fuelwood as a source of energy is strongly dependent on the properties of the biomass. This study characterizes common hardwood species from Mozambique and evaluates their quality as a fuel. Disc samples, taken at breast height, from Afzelia quanzensis Welwn, Millettia stuhlmannii Taub, Pterocarpus angolensis DC, Sterculia appendiculata K. Schum, Pericopsis angolensis Meeuwen, Acacia nigrescens Oliv., Pseudolachostylis maprounaefolia Pax, and Icuria dunensis Wieringa, were collected from three provinces in Mozambique. Chemical and physical properties were analyzed. The raking of the species as fuel was performed using fuelwood value index. The higher heating value varied between 19.38 and 21.50 MJ/kg dry weight. The concentration of lignin ranged from 21.96 up to 36.69% weight dry basis (wt% d.b.), and ash free. All studied species showed very low concentrations of Si, S, and Cl. Ash content varied between 0.76-3.71 wt% (d.b.), while the basic density ranged from 536 to 1,111 k gm(-3). Heavy metals were also determined and their concentrations were below the values reported in the literature. The species Acacia nigrescens had the highest fuelwood value index and it was closely followed by Icuria dunensis and Millettia stuhlmannii. The worst ranked was Sterculia appendiculata.
|
|
| 2. |
- Lhate, Inácio Arnaldo
(författare)
-
Chemical composition and machinability of selected wood species from Mozambique
- 2011
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The objectives of the current work were to carry out a survey on timber sector in Mozambique and to determine chemical, calorific and machinability features of selected species. Mozambican timber sector was described as dominated by selective harvesting practices on a few hardwood species out of 118 species growing in the forest with potential for industrial timber. Selective logging is believed to be due to the demand in both domestic and international markets of traditionally used, and lack of technical data on lesser used species. In order to avert the negative effect of selective logging, this work argued the need to widen the resource base by studying lesser used species. Taking into account stock volumes recorded in the last forest inventory, the lesser used species, Acacia nigrescens Oliv, Icuria dunensis Wieringa, Pseudolachnostylis maprounaefolia Pax, and Sterculia appendiculata K. Schum were selected to assess their chemical, calorific and machinability features. Lesser used species were compared with traditionally used species, namely, Afzelia quanzensis Welwn, Milletia stuhlmannii Taub, Pericopsis angolensis Meeweven, and Pterocarpus angolensis DC, regarding chemical and calorific features. Aiming to get a thorough chemical characterization along radial direction, samples for chemical analyses were taken from sapwood, outer and inner heartwood. Chemical, proximate and ultimate analyses were performed according to standard methods. The contents of carbohydrates, extractive, ash, volatiles and high heating values were in ranges considered normal for tropical species. Contents of lignin and minerals were unexpectedly high in Pseudolachnostylis, reaching 37.51% and 2.2% (wt%, extractive free) on a dry basis, respectively. Based on the determined chemical features, it was concluded that Acacia and Pseudolachnostylis were similar to well-known, whereas Icuria and Sterculia differed from the known species. In ranking of all studied species using fuelwood value index (FVI), Acacia was best ranked, whereas Sterculia was worst ranked. Acacia, Pericopsis, Pseudolachnostylis and Sterculia, considered as lesser used in the study, were subjected to experiments for cutting forces and tool wearing measurements. Density measurements on samples for cutting forces and tool wearing experiments were performed with the aid of a CT scanner. Two different cutting tools 20˚ and 30˚ rake angle were used. Before cutting, the edge radius of the tools was measured. Main cutting force in 90˚-90˚ and 90˚-0˚ cutting directions were measured by piezoelectric gauge. Tool wearing experiments were performed on a shaper using cemented carbide tools for woodworking and fixed cutting conditions. Edge recession and tool wear radius were measured for monitoring tool wearing. Ranking the species using cutting forces only or tool wearing only for machinability recorded different earnings, and for measuring the net effect of machining output variables, this work suggested the Digraph and Matrix Method as an expeditious and integrated method to evaluate the machinability of lesser used species. Based on the calculated indexes, the easiest species to be machined was Sterculia, whereas the most difficult species to be machined was Acacia. Cutting forces earned by Acacia seemed to have been affected by anatomical features not measured in current work.
|
|
| 3. |
- Lhate, Inácio Arnaldo, et al.
(författare)
-
Chemical composition of traditionally and lesser used wood species from Mozambique
- 2010
-
Ingår i: Wood Material Science and Engineering. - : Informa UK Limited. - 1748-0272 .- 1748-0280. ; 5, s. 143-150
-
Tidskriftsartikel (refereegranskat)abstract
- The main objective of this study was to determine the chemical composition of some lesser used Mozambican native wood species, such as Acacia nigrescens Oliv., Icuria dunensis Wieringa, Pseudolachnostylis maprounaefolia Pax and Sterculia appendiculata K. Schum. Another aim was to compare these species with traditionally used species, namely, Afzelia quanzensis Welwn, Milletia stuhlmannii Taub, Pericopsis angolensis Meeuwen and Pterocarpus angolensis DC. Wood samples for analysis were taken from sapwood, outer and inner heartwood. All chemical analyses were performed according to standard methods. The contents of carbohydrates, extractives and ash were in ranges considered normal for tropical species. The contents of lignin and minerals were unexpectedly high in Pseudolachnostylis (ntholo), reaching 37.51% and 2.2% (wt% extractive-free) on a dry basis, respectively. Based on the determined chemical features, it was concluded that Acacia and Pseudolachnostylis were similar to well-known species, whereas Icuria and Sterculia differed from the known species. Keywords: Acacia nigrescens; cellulose; extractives; hemicellulose; Icuria dunensis; Klason lignin; minerals content; Pseudolachnostylis maprounaefolia; Sterculia appendiculata
|
|
