| 1. |
- Yang, Suhua, et al.
(författare)
-
Polyvinyl alcohol films incorporated with clove essential oil emulsions stabilized by soy protein isolate-derived amyloid fibrils: Fabrication, characterization, and its application for active packaging
- 2024
-
Ingår i: Food Chemistry. - 0308-8146 .- 1873-7072. ; 440
-
Tidskriftsartikel (refereegranskat)abstract
- This study aimed to prepare a novel emulsion film with high stability, using soy protein-derived amyloid fibrils (SAFs) as an emulsifier incorporating clove essential oil (CEO) as the active component, and the polyvinyl alcohol (PVA) matrix to stabilize the system. The results demonstrated that SAFs can successfully stabilize CEO. Emulsion prepared by SAFS and CEO (SAC) exhibited a small droplet size and better dispersibility compared with SPI and CEO (SC) emulsion. According to FT-IR results, PVA addition increased the hydrogen bond interactions among emulsion film components, thus further reinforcing the protein matrix, increasing the tensile strength (TS) (41.18 MPa) and elongation at break (E) (121.62 %) of the films. The uniform appearance of SAC-PVA (SACP) emulsion films was confirmed by SEM images. Furthermore, SACP emulsion films show distinctive barrier properties, optical properties, and outstanding antioxidant properties. Finally, emulsion films exhibited excellent preservation of strawberries, resulting in an effective decline of the decay rate.
|
|
| 2. |
- Li, Guohui, et al.
(författare)
-
Efficient heat dissipation perovskite lasers using a high-thermal-conductivity diamond substrate
- 2023
-
Ingår i: SCIENCE CHINA Materials. - : Springer Science and Business Media LLC. - 2095-8226 .- 2199-4501. ; 66:6, s. 2400-2407
-
Tidskriftsartikel (refereegranskat)abstract
- Efficient heat dissipation that can minimize temperature increases in device is critical in realizing electrical injection lasers. High-thermal-conductivity diamonds are promising for overcoming heat dissipation limitations for perovskite lasers. In this study, we demonstrate a perovskite nanoplatelet laser on a diamond substrate that can efficiently dissipate heat generated during optical pumping. Tight optical confinement is also realized by introducing a thin SiO2 gap layer between nanoplatelets and the diamond substrate. The demonstrated laser features a Q factor of ∼1962, a lasing threshold of 52.19 µJ cm−2, and a low pump-density-dependent temperature sensitivity (∼0.56 ± 0.01 K cm2 µJ−1) through the incorporation of the diamond substrate. We believe our study could inspire the development of electrically driven perovskite lasers. [Figure not available: see fulltext.].
|
|
| 3. |
- Li, Guohui, et al.
(författare)
-
Localized Bound Multiexcitons in Engineered Quasi-2D Perovskites Grains at Room Temperature for Efficient Lasers
- 2023
-
Ingår i: Advanced Materials. - : Wiley. - 0935-9648 .- 1521-4095. ; 35:20
-
Tidskriftsartikel (refereegranskat)abstract
- Reducing the excitation threshold to minimize the Joule heating is critical for the realization of perovskite laser diodes. Although bound excitons are promising for low threshold laser, how to generate them at room temperature for laser applications is still unclear in quasi-2D perovskite-based devices. In this work, via engineering quasi-2D perovskite PEA2(CH3NH3)n-1PbnBr3n+1 microscopic grains by the anti-solvent method, room-temperature multiexciton radiative recombination is successfully demonstrated at a remarkably low pump density of 0.97 µJ cm−2, which is only one-fourth of that required in 2D CdSe nanosheets. In addition, the well-defined translational momentum in quasi-2D perovskite grains can restrict the Auger recombination which is detrimental to radiative emission. Furthermore, the quasi-2D perovskite grains are favorable for increasing binding energies of excitons and biexcitons and so as the related radiative recombination. Consequently, the prepared phase quasi-2D perovskite film renders a threshold of room-temperature stimulated emission as low as 13.7 µJ cm−2, reduced by 58.6% relative to the amorphous counterpart with larger grains. The findings in this work are expected to facilitate the development of solution-processable perovskite multiexcitonic laser diodes.
|
|
| 4. |
- Li, Tianzhong, et al.
(författare)
-
Material-based engineering of bacteria for cancer diagnosis and therapy
- 2021
-
Ingår i: Applied Materials Today. - : Elsevier. - 2352-9407. ; 25
-
Tidskriftsartikel (refereegranskat)abstract
- Various categories of biomaterials have been utilized for drug delivery, genetic modification, photodynamic and photothermal therapies due to their distinct physicochemical properties, including photothermal convertibility, stimuli-responsiveness, and inherent capability to generate photodynamical radicals. However, successful treatments of cancer are largely hindered by the limited accessibility of nanomaterials into hypoxic or metastatic tumor tissues. Among the various tumor-targeting strategies, bacterial fabrication exhibits particular advantages such as specific hypoxia tropism, high motility, and rapid self replication. Biomineralization, i.e. bacterial modification, involves the fabrication of bacteria by nanomaterials for precise cancer imaging as well as targeted drug delivery, overcoming the physiological barriers and improving the therapeutic efficiency. Fabrication of bacteria strains can be conducted by various methods, including direct adsorption, electrostatic interaction, covalent ligation, and surface precipitation. In this review, a brief introduction to commonly-utilized biomaterials and bacteria species is provided. A systemic overview of recent advances of bacteria fabrication strategies and techniques are then discussed, followed by future prospective of bacteria-facilitated cancer therapy and diagnostics.
|
|
| 5. |
- Xu, Fengqin, et al.
(författare)
-
Effects of an Innovative Training Program for New Graduate Registered Nurses : A Comparison Study
- 2021
-
Ingår i: SAGE Open. - : SAGE Open. - 2158-2440. ; 11:1
-
Tidskriftsartikel (refereegranskat)abstract
- New graduate registered nurses (NGRNs) face a great challenge during the transition from school to clinical practice. We conducted a quasi-randomized controlled study to evaluate the effects of a new training mode for newly recruited NGRNs in a Chinese teaching hospital. A total of 150 NGRNs were recruited from a teaching hospital and assigned into two groups. The conventional training and a new training program were taken for the control group and the research group, respectively. At the end of the training, the two groups were evaluated and compared for theoretical knowledge and operation skills using a mutual-evaluation examination and the Chinese Registered Nurse Core Competency Scale. The scores of theoretical knowledge (88.4 vs. 81.7, p < .001) and operation skills (94.8 vs. 90.3, p < .001), and the total core competencies score (156.2 vs. 148.8, p < .05) in the research group were statistically significantly higher than those in the control group. Compared with the control group, the research group also had statistically significantly higher scores in education and consultation (2.47 vs. 2.40), clinical nursing (2.87 vs. 2.62), interpersonal relationship (2.56 vs. 2.43), and critical thinking and scientific research (2.78 vs. 2.61). The innovative pre-job training program for NGRNs conducted in Chinese clinical nursing skill training bases might significantly improve the training effects and is worthy of broader implementation.
|
|
| 6. |
- Zhang, Xing, et al.
(författare)
-
Diagnosing NB plasmas on the EAST tokamak with new time-of-flight neutron spectrometer
- 2014
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 54:10, s. 104008-
-
Tidskriftsartikel (refereegranskat)abstract
- The new neutron spectrometer time-of-flight enhanced diagnostics (TOFED) for the EAST tokamak is presented and its characteristics are described in terms of simulation results, as well as the interface in the torus hall along with new neutral beam (NB) injectors. The use of TOFED for studies of the slowing down of NB-injected deuterons is illustrated. The implications of measuring the neutron emission on a long pulse machine are discussed together with the experimental challenges and diagnostic possibilities approaching those to be encountered in continuous operation.
|
|
| 7. |
- Zhao, Kefan, et al.
(författare)
-
High-Quality Solution-Processed Quasi-2D Perovskite for Low-Threshold Lasers
- 2024
-
Ingår i: ACS Applied Materials and Interfaces. - 1944-8244. ; 16:17, s. 22361-22368
-
Tidskriftsartikel (refereegranskat)abstract
- Spin-coated quasi-two-dimensional halide perovskite films, which exhibit superior optoelectronic properties and environmental stability, have recently been extensively studied for lasers. Crystallinity is of great importance for the laser performance. Although some parameters related to the spin-coating process have been studied, the in-depth understanding and effective control of the acceleration rate on two-dimensional perovskite crystallization during spin-coating are still unknown. Here we investigate the effect of solvent evaporation on the microstructure of the final perovskite films during the spin-coating process. The crystallization quality of the film can be significantly improved by controlling solvent evaporation. As a result, the prepared quasi-2D perovskite film exhibits a stimulated emission threshold (pump: 343 nm, 6 kHz, 290 fs) of 550 nm as low as 16.2 μJ/cm2. Transient absorption characterization shows that the radiative biexciton recombination time is reduced from 738.5 to 438.3 ps, benefiting from the improved crystallinity. The faster biexciton recombination significantly enhanced the photoluminescence efficiency, which is critical for population inversion. This work could contribute to the development of low-threshold lasers.
|
|
