| 1. |
- Li, Jiantong, et al.
(författare)
-
Ink-jet printed thin-film transistors with carbon nanotube channels shaped in long strips
- 2011
-
Ingår i: Journal of Applied Physics. - : AIP Publishing. - 0021-8979 .- 1089-7550. ; 109:8, s. 084915-
-
Tidskriftsartikel (refereegranskat)abstract
- The present work reports on the development of a class of sophisticated thin-film transistors (TFTs) based on ink-jet printing of pristine single-walled carbon nanotubes (SWCNTs) for the channel formation. The transistors are manufactured on oxidized silicon wafers and flexible plastic substrates at ambient conditions. For this purpose, ink-jet printing techniques are developed with the aim of high-throughput production of SWCNT thin-film channels shaped in long strips. Stable SWCNT inks with proper fluidic characteristics are formulated by polymer addition. The present work unveils, through Monte Carlo simulations and in light of heterogeneous percolation, the underlying physics of the superiority of long-strip channels for SWCNT TFTs. It further predicts the compatibility of such a channel structure with ink-jet printing, taking into account the minimum dimensions achievable by commercially available printers. The printed devices exhibit improved electrical performance and scalability as compared to previously reported ink-jet printed SWCNT TFTs. The present work demonstrates that ink-jet printed SWCNT TFTs of long-strip channels are promising building blocks for flexible electronics.
|
|
| 2. |
- Li, Zheng, et al.
(författare)
-
Inkjet Printed Disposable High-Rate On-Paper Microsupercapacitors
- 2022
-
Ingår i: Advanced Functional Materials. - : Wiley. - 1616-301X .- 1616-3028. ; 32:1, s. 2108773-
-
Tidskriftsartikel (refereegranskat)abstract
- On-paper microsupercapacitors (MSCs) are a key energy storage component for disposable electronics that are anticipated to essentially address the increasing global concern of electronic waste. However, nearly none of the present on-paper MSCs combine eco-friendliness with high electrochemical performance (especially the rate capacity). In this work, highly reliable conductive inks based on the ternary composite of poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS), graphene quantum dots and graphene are developed for scalable inkjet printing of compact (footprint area ≈ 20 mm2) disposable MSCs on commercial paper substrates. Without any post treatment, the printed patterns attain a sheet resistance as low as 4 Ω ▫−1. The metal-free all-solid-state MSCs exhibit a maximum areal capacitance > 2 mF cm−2 at a high scan rate of 1000 mV s−1, long cycle life (>95% capacitance retention after 10 000 cycles), excellent flexibility, and long service time. Remarkably, the “totally metal-free” MSC arrays are fully inkjet printed on paper substrates and also exhibit high rate performance. The life cycle assessment indicates that these printed devices have much lower eco-toxicity and global warming potential than other on-paper MSCs.
|
|
| 3. |
- Liu, Zhiying, et al.
(författare)
-
On Gate Capacitance of Nanotube Networks
- 2011
-
Ingår i: IEEE Electron Device Letters. - : IEEE. - 0741-3106 .- 1558-0563. ; 32:5, s. 641-643
-
Tidskriftsartikel (refereegranskat)abstract
- This letter presents a systematic investigation of the gate capacitance C-G of thin-film transistors (TFTs) based on randomly distributed single-walled carbon nanotubes (SWCNTs) in the channel. In order to reduce false counting of SWCNTs that do not contribute to current conduction, C-G is directly measured on the TFTs using a well-established method for MOSFETs. Frequency dispersion of C-G is observed, and it is found to depend on the percolation behavior in SWCNT networks. This dependence can be accounted for using an RC transmission line model. These results are of important implications for the determination of carrier mobility in nanoparticle-based TFTs.
|
|
| 4. |
|
|
| 5. |
- Qu, Minni, et al.
(författare)
-
Charge-Injection-Induced Time Decay in Carbon Nanotube Network-Based FETs
- 2010
-
Ingår i: IEEE Electron Device Letters. - 0741-3106 .- 1558-0563. ; 31:10, s. 1098-1100
-
Tidskriftsartikel (refereegranskat)abstract
- A voltage-pulse method is utilized to investigate the charge-injection-induced time decay of the source-drain current of field-effect transistors with randomly networked single-walled carbon nanotubes (CNTs) as the conduction channel. The relaxation of trapped carriers in the CNT networks can be accounted for by assuming two exponential decays occurring simultaneously. The slow decay is characterized by a time constant comparable to literature data obtained for a carrier recombination in the semiconducting CNTs. The faster decay with a time constant that has a smaller order of magnitude is attributed to the annihilation of trapped carriers in metallic CNTs or at metal-CNT contacts. Both time constants are gate-bias dependent.
|
|
| 6. |
- Su, Yingchun, et al.
(författare)
-
Monolithic Fabrication of Metal‐Free On‐Paper Self‐Charging Power Systems
- 2024
-
Ingår i: Advanced Functional Materials. - : Wiley. - 1616-301X .- 1616-3028.
-
Tidskriftsartikel (refereegranskat)abstract
- Self-charging power systems (SCPSs) are envisioned as promising solutions for emerging electronics to mitigate the increasing global concern about battery waste. However, present SCPSs suffer from large form factors, unscalable fabrication, and material complexity. Herein, a type of highly stable, eco-friendly conductive inks based on poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) are developed for direct ink writing of multiple components in the SCPSs, including electrodes for miniaturized spacer-free triboelectric nanogenerators (TENGs) and microsupercapacitors (MSCs), and interconnects. The principle of “one ink, multiple functions” enables to almost fully print the entire SCPSs on the same paper substrate in a monolithic manner without post-integration. The monolithic fabrication significantly improves the upscaling capability for manufacturing and reduces the form factor of the entire SCPSs (a small footprint area of ≈2 cm × 3 cm and thickness of ≈1 mm). After pressing/releasing the TENGs for ≈79000 cycles, the 3-cell series-connected MSC array can be charged to 1.6 V while the 6-cell array to 3.0 V. On-paper SCPSs are promising to serve as lightweight, thin, sustainable, and low-cost power supplies.
|
|
| 7. |
|
|
| 8. |
- Hu, Xiangzhao, et al.
(författare)
-
Boosting Industrial-Level CO2 Electroreduction of N-Doped Carbon Nanofibers with Confined Tin-Nitrogen Active Sites via Accelerating Proton Transport Kinetics
- 2023
-
Ingår i: Advanced Functional Materials. - : John Wiley and Sons Inc. - 1616-301X .- 1616-3028. ; 33:4
-
Tidskriftsartikel (refereegranskat)abstract
- The development of highly efficient robust electrocatalysts with low overpotential and industrial-level current density is of great significance for CO2 electroreduction (CO2ER), however the low proton transport rate during the CO2ER remains a challenge. Herein, a porous N-doped carbon nanofiber confined with tin-nitrogen sites (Sn/NCNFs) catalyst is developed, which is prepared through an integrated electrospinning and pyrolysis strategy. The optimized Sn/NCNFs catalyst exhibits an outstanding CO2ER activity with the maximum CO FE of 96.5%, low onset potential of −0.3 V, and small Tafel slope of 68.8 mV dec−1. In a flow cell, an industrial-level CO partial current density of 100.6 mA cm−2 is achieved. In situ spectroscopic analysis unveil the isolated Sn-N site acted as active center for accelerating water dissociation and subsequent proton transport process, thus promoting the formation of intermediate *COOH in the rate-determining step for CO2ER. Theoretical calculations validate pyrrolic N atom adjacent to the Sn-N active species assisted reducing the energy barrier for *COOH formation, thus boosting the CO2ER kinetics. A Zn-CO2 battery is designed with the cathode of Sn/NCNFs, which delivers a maximum power density of 1.38 mW cm−2 and long-term stability.
|
|
| 9. |
- Li, Jiantong, et al.
(författare)
-
Conductivity exponents in stick percolation
- 2010
-
Ingår i: Physical Review E. Statistical, Nonlinear, and Soft Matter Physics. - : American Physical Society. - 1063-651X .- 1095-3787. ; 81:021120
-
Tidskriftsartikel (refereegranskat)abstract
- On the basis of Monte Carlo simulations, the present work systematically investigates how conductivity exponents depend on the ratio of stick-stick junction resistance to stick resistance for two-dimensional stick percolation. Simulation results suggest that the critical conductivity exponent extracted from size-dependent conductivities of systems exactly at the percolation threshold is independent of the resistance ratio and has a constant value of 1.280 +/- 0.014. In contrast, the apparent conductivity exponent extracted from density-dependent conductivities of systems well above the percolation threshold monotonically varies with the resistance ratio, following an error function, and lies in the vicinity of the critical exponent.
|
|
| 10. |
- Li, Jiantong, et al.
(författare)
-
Contact-electrode insensitive rectifiers based on carbon nanotube network transistors
- 2008
-
Ingår i: IEEE Electron Device Letters. - : Institute of Electrical and Electronics Engineers (IEEE). - 0741-3106 .- 1558-0563. ; 29:5, s. 500-502
-
Tidskriftsartikel (refereegranskat)abstract
- This letter presents rectifiers based on the diode connection of carbon nanotube network (CNN) transistors. Despite a low density of carbon nanotubes in the CNNs, the devices can achieve excellent performance with a forward/reverse current ratio reaching 10(5). By casting nanotube suspension on oxidized Si substrates with predefined electrodes, CNN-based field-effect transistors are readily prepared. By short-circuiting the source and gate terminals, CNN-based rectifiers are realized with the rectification characteristics independent of whether Pd or Al is employed as the contact electrodes. This independence is especially attractive for applications of CNN-based transistors/rectifiers in flexible electronics with various printing techniques.
|
|
