1. |
- Lu, Yiping, et al.
(författare)
-
Directly cast bulk eutectic and near-eutectic high entropy alloys with balanced strength and ductility in a wide temperature range
- 2017
-
Ingår i: Acta Materialia. - : Elsevier BV. - 1359-6454. ; 124, s. 143-150
-
Tidskriftsartikel (refereegranskat)abstract
- High entropy alloys (HEAs) usually possess weak liquidity and castability, and considerable compositional inhomogeneity, mainly because they contain multiple elements with high concentrations. As a result, large-scale production of HEAs by casting is limited. To address the issue, the concept of eutectic high entropy alloys (EHEAs) was proposed, which has led to some promise in achieving good quality industrial scale HEAs ingots, and more importantly also good mechanical properties. In the practical large-scale casting, the actual composition of designed EHEAs could potentially deviate from the eutectic composition. The influence of such deviation on mechanical properties of EHEAs is important for industrial production, which constitutes the topic of the current work. Here we prepared industrial-scale HEAs ingots near the eutectic composition: hypoeutectic alloy, eutectic alloy and hypereutectic alloy. Our results showed that the deviation from eutectic composition does not significantly affect the mechanical properties, castability and the good mechanical properties of EHEAs can be achieved in a wide compositional range, and at both room and cryogenic temperatures. Our results suggested that EHEAs with simultaneous high strength and high ductility, and good liquidity and castability can be readily adapted to large-scale industrial production. The deformation behavior and microstructure evolution of the eutectic and near-eutectic HEAs were thoroughly studied using a combination of techniques, including strain measurement by digital image correlation, in-situ synchrotron X-ray diffraction, and transmission electron microscopy. The wavy strain distribution and the therefore resulted delay of necking in EHEAs were reported for the first time.
|
|
2. |
- Lu, Yiping, et al.
(författare)
-
A new strategy to design eutectic high-entropy alloys using mixing enthalpy
- 2017
-
Ingår i: Intermetallics. - : Elsevier BV. - 0966-9795. ; 91, s. 124-128
-
Tidskriftsartikel (refereegranskat)abstract
- Although eutectic high entropy alloys (EHEAs) display homogeneously fine microstructure, excellent castability and promising industrial application potential, how to design eutectic compositions in high entropy alloys (HEAs) remains to be challenging. Here, a novel strategy, specifically, through calculation of mixing enthalpy, was used to locate eutectic compositions in HEAs. As a proof of this concept, a series of EHEAs were located and prepared following the mixing enthalpy method. Using this new strategy, eutectic compositions can be designed conveniently, once one can classify elements into two different groups. This new alloy design strategy can be readily adapted to locate new EHEAs.
|
|
3. |
- Lu, Yiping, et al.
(författare)
-
Preparing bulk ultrafine-microstructure high-entropy alloys: Via direct solidification
- 2018
-
Ingår i: Nanoscale. - : Royal Society of Chemistry (RSC). - 2040-3372 .- 2040-3364. ; 10:4, s. 1912-1919
-
Tidskriftsartikel (refereegranskat)abstract
- In the past three decades, nanostructured (NS) and ultrafine-microstructure (UFM) materials have received extensive attention due to their excellent mechanical properties such as high strength. However, preparing low-cost and bulk NS and UFM materials remains to be a challenge, which limits their industrial applications. Here, we report a new strategy to prepare bulk UFM alloys via the direct solidification of high-entropy alloys (HEAs). As a proof of concept, we designed AlCoCr x FeNi (1.8 ≤ x ≤ 2.0) HEAs and achieved a complete UFM in bulk materials. The compositional requirements for obtaining the formation of the UFM are highly demanding, necessitating the coupling of near eutectic alloy composition and the high temperature decomposition of supersaturated primary and secondary phases. Our strategy provides a low-cost and highly efficient method to prepare bulk UFM alloys, with great potential to accelerate the engineering application of these materials.
|
|
4. |
- Lu, Yiping, et al.
(författare)
-
Promising properties and future trend of eutectic high entropy alloys
- 2020
-
Ingår i: Scripta Materialia. - : Elsevier BV. - 1359-6462. ; 187, s. 202-209
-
Tidskriftsartikel (refereegranskat)abstract
- Eutectic high-entropy alloys (EHEAs), as a sub-group of high-entropy alloys (HEAs), are becoming a new research hotspot in the metallic materials community because of their excellent castability, fine and uniform microstructures even in the as-cast state, high strength, and good ductility. Some of the EHEAs have shown promising potentials for industrial applications. Here, the history, interesting solidification microstructure and mechanical properties, and the design strategy of EHEAs are reviewed, and their future prospects are outlined.
|
|