| 1. |
- He, Yingnan, et al.
(författare)
-
Separable amino-functionalized biochar/alginate beads for efficient removal of Cr(VI) from original electroplating wastewater at room temperature
- 2022
-
Ingår i: Journal of Cleaner Production. - : Elsevier. - 0959-6526 .- 1879-1786. ; 373
-
Tidskriftsartikel (refereegranskat)abstract
- An alginate gel bead composite adsorbent with polyethyleneimine (PEI) as a surface modifier and Eichhornia crassipes (EC) biochar, known as EC-alg/PEI-3, was added internally to the adsorb Cr(VI) from an aqueous environment. The functionalized gel beads were characterized using SEM, XPS, FTIR, and other techniques. The maximum adsorption capacities of EC-alg/PEI-3 were 714.3 mg g−1 at 10 °C and 769.2 mg g−1 at 25 °C. In the treatment of highly concentrated electroplating wastewater, EC-alg/PEI-3 can be dosed at 1.4 g L−1 to reduce the concentration of Cr(VI) to below 0.05 ppm. EC-alg/PEI-3 maintained a competitive adsorption capacity after six cycles. This spherical adsorbent material is easy to prepare, has a very high adsorption capacity, is environmentally friendly, and can be easily recycled. The EC-alg/PEI-3 gel beads are promising for the treatment of industrial wastewater.
|
|
| 2. |
- Huang, Ruihua, et al.
(författare)
-
Star-shaped porous nitrogen-doped metal-organic framework carbon as an electrochemical platform for sensitive determination of Cd(II) in environmental and tobacco samples
- 2022
-
Ingår i: Analytica Chimica Acta. - : Elsevier. - 0003-2670 .- 1873-4324. ; 1228
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, cetyltrimethylammonium bromide and zeolitic imidazolate framework-8 (ZIF-8) were first assembled via the chemical co-precipitation, and high-quality carbon-based metal-free nanomaterials were synthesized using a heat-treatment process. The internal and morphological characteristics of hexagonal Star ZIF-8 were investigated using scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The electrochemical sensor with a good response to Cd(II) was prepared via square-wave anodic stripping voltammetry (SWASV) with Star ZIF-8 nanomaterial-modified glassy carbon electrodes. The main parameters were adjusted to obtain the optimal stripping response and a wide linear range. Concurrently, under the calculation of SWASV, the sensitivity of Star ZIF-8-Nafion/GCE to Cd(II) was increased by five orders of magnitude (0.5–230 μg/L), and the determination level was even low to 0.48 μg/L. Based on the high anti-interference ability and stability of the sensor, the application potential of Star ZIF-8 carbon-based metal-free nanomaterials for the detection of trace Cd(II) in was confirmed.
|
|
| 3. |
- Huang, Yimin, et al.
(författare)
-
Facile synthesis of sodium lignosulfonate/polyethyleneimine/sodium alginate beads with ultra-high adsorption capacity for Cr(VI) removal from water
- 2022
-
Ingår i: Journal of Hazardous Materials. - : Elsevier. - 0304-3894 .- 1873-3336. ; 436
-
Tidskriftsartikel (refereegranskat)abstract
- Chromium (VI) is a widely occurring toxic heavy metal ion in industrial wastewater that seriously impacts the environment. In this study, we used environmentally friendly sodium lignosulfonate (SL), polyethyleneimine (PEI), and sodium alginate (SA) to synthesize SL/PEI/SA beads by employing a simple crosslinking method with to develop a novel absorbent with excellent adsorption capacity and practical application in wastewater treatment. We studied the adsorption performance of SL/PEI/SA through batch adsorption and continuous dynamic adsorption experiments. SL/PEI/SA has ultra-high adsorption capacity (2500 mg·g-1) at 25 ℃, which is much higher than that of existing adsorbents. Humic acids and coexisting anions commonly found in wastewater have minimal effect on the adsorption performance of SL/PEI/SA. In the column system, 1 g SL/PEI/SA can treat 8.1 L secondary electroplating wastewater at a flow rate of 0.5 mLmin-1, thereby enabling the concentration of Cr(VI) in secondary electroplating wastewater to meet the discharge standard (< 0.2 mg·L-1). It is worth noting that the concentration of competitive ions in secondary electroplating wastewater is more than 500 times higher than that of Cr(VI). These results demonstrate that the novel SL/PEI/SA beads can be effectively applied in the removal of Cr(VI) in wastewater.
|
|
| 4. |
- Jia, Xiuxiu, et al.
(författare)
-
Rod-shaped lanthanum oxychloride-decorated porous carbon material for efficient and ultra-fast removal of phosphorus from eutrophic water
- 2023
-
Ingår i: Separation and Purification Technology. - : Elsevier. - 1383-5866 .- 1873-3794. ; 306
-
Tidskriftsartikel (refereegranskat)abstract
- Removal of excess phosphorus (P) from water systems can effectively prevent eutrophication and maintain the ecological balance. In this study, we used a novel freeze-drying thermal oxidation process to prepare a rod-shaped lanthanum oxychloride decorated porous carbon material, polyvinylpyrrolidone /LaOCl (PL). PL showed excellent performance in removing P from water; the preparation method had not been reported previously. Specifically, the adsorption capacity of PL for P was as high as 90.9 mg P/g, and the removal rate was greater than 92.0 % over a wide pH range (2.5–11). Fast adsorption kinetics is an important feature for P removal. The high removal rate of PL for P could be achieved in a short time; that is, more than 97.8 % of the P species could be removed in only 25 min (initial concentration: 20 mg P/L). For water samples from the natural Laoyu River (24 μg P/L), 0.01 g of PL could reduce approximately 53 L of water to below the eutrophication threshold value (20 μg P/L). Furthermore, after five repetitions of the adsorption–desorption process, no significant decrease in the P removal efficiency was observed. The high adsorption capacity, fast adsorption kinetics, and persistent cyclic stability of PL for P in water were attributed to the advanced preparation process, in which freeze-drying ensured the porosity of the adsorbent and the uniformity of LaCl3 distribution; and the subsequent heat treatment created conditions for the generation of LaOCl species with stable adsorption activity. The adsorption mechanism mainly involved ion exchange, electrostatic attraction, and hydrogen bonding. This study provides a theoretical basis for preparing new adsorbing materials of P and technical support for preventing water eutrophication.
|
|
| 5. |
- Lin, Zhong, et al.
(författare)
-
Rhizospheric effects on atrazine speciation and degradation in laterite soils of Pennisetum alopecuroides (L.) Spreng
- 2018
-
Ingår i: Environmental Science and Pollution Research. - : Springer Science and Business Media LLC. - 0944-1344 .- 1614-7499. ; 25:13, s. 12407-12418
-
Tidskriftsartikel (refereegranskat)abstract
- Atrazine (2-chloro-4-ethylamino-6-isopropylamino-1,3,5-triazine) is a worldwide-used herbicide and often detected in agricultural soils and groundwater at concentrations above the permitted limit, because of its high mobility, persistence, and massive application. This study applied pot experiments to investigate the atrazine contents and speciation during the phytoremediation process by Pennisetum alopecuroides (L.) Spreng. in laterite soils. From the change of the total atrazine and bioavailable atrazine measured by diffusive gradients in thin film (DGT), P. alopecuroides significantly improved atrazine degradation efficiency from 15.22 to 51.46%, attributing to the increasing bioavailable atrazine in rhizosphere. Only a small amount of atrazine was taken up by P. alopecuroides root and the acropetal translocation from roots to shoots was limited. The atrazine speciation was significantly different between rhizosphere and non-rhizosphere, attributing to the declining pH and organic matters in rhizosphere. The relationship between pH and soil-bound/humus-fixed atrazine illustrated the pH-dependant release of the atrazine from soils and the competition between humus adsorption and uptake by P. alopecuroides. The present study reveals the important roles of soil pH and organic matters in atrazine speciation and availability in laterite soils, and provides new insights in the rhizospheric effects on effective phytoremediation of atrazine.
|
|
| 6. |
- Chen, Dihao, et al.
(författare)
-
Correlation between pitting susceptibility and surface acidity, point of zero charge of passive film on aluminum: Influence of alloying elements
- 2024
-
Ingår i: Corrosion Science. - : Elsevier BV. - 0010-938X .- 1879-0496. ; 227
-
Tidskriftsartikel (refereegranskat)abstract
- The pitting potential, intrinsic surface acidity, point of zero charge of passive film on Al are studied using first-principles calculations to establish their relationships. Influences of alloying elements Zn, Cr, Nb, Si, Mo and Sc on adsorption of NH3 and NaCl, pHpzc of Al2O3 and pitting susceptibility of Al are investigated. The efficiency for enhancing pitting resistance of Al is evaluated, yielding the ratios Si: Zn: Cr: Mo: Nb: Sc = 1.8: − 0.3: 1: 1.9: 1.4: 0.2. A model for the dependence of pitting potential on the concentration of alloying elements in Al alloy matrix is developed, based on effects of alloying elements on the surface charge of passive film. The effects of Sc on pitting potential and pHpzc of Al oxide are predicted based on the calculated results, which are supported by electrochemical measurement, XPS analysis and contact angle titration.
|
|
| 7. |
- Gao, Sanshuang, et al.
(författare)
-
Selective voltammetric determination of Cd(II) by using N,S-codoped porous carbon nanofibers
- 2018
-
Ingår i: Microchimica Acta. - : Springer. - 0026-3672 .- 1436-5073. ; 185
-
Tidskriftsartikel (refereegranskat)abstract
- Porous carbon nanofibers codoped with nitrogen and sulfur (NFs) were prepared by pyrolysis of trithiocyanuric acid, silica nanospheres and polyacrylonitrile (PAN) followed by electrospinning. The NFs were used to modify a glassy carbon electrode (GCE) which then displayed highly sensitive response to traces of Cd(II). Compared to a bare GCE and a Nafion modified GCE, the GCE modified with codoped NFs shows improved sensitivity for Cd(II) in differential pulse anodic sweep voltammetry. The stripping peak current (typically measured at 0.81 V vs. Ag/AgCl) increases linearly in the 2.0–500 μg·L−1 Cd(II) concentration range. This is attributed to the large surface area (109 m2·g−1), porous structure, and high fraction of heteroatoms (19 at.% of N and 0.75 at.% of S). The method was applied to the determination of Cd(II) in (spiked) tap water where it gave recoveries that ranged between 96% and 103%.
|
|
| 8. |
- Gao, Sanshuang, et al.
(författare)
-
Sensitive and Selective Differential Pulse Voltammetry Detection of Cd(II) and Pb(II) Using Nitrogen-Doped Porous Carbon Nanofiber Film Electrode
- 2017
-
Ingår i: Journal of the Electrochemical Society. - : Electrochemical Society. - 0013-4651 .- 1945-7111. ; 164:13, s. H967-H974
-
Tidskriftsartikel (refereegranskat)abstract
- Carbon matrix materials are regarded as one of the most important electrode materials for heavy metal detection. But even so, optimization procedures of carbon nanofibers (CNFs) for tracing Cd(II) and Pb(II) remains challenging. Here, zeolitic imidazolate framework (ZIF-8)/polyacrylonitrile (PAN)-derived nitrogen-doped porous carbon nanofibers (N-PCNFs) were investigated as a new electrode material for determining the concentration of Cd(II) and Pb(II). By optimizing electrochemical conditions such as deposition potential, deposition time, pH of buffer solution, and quantity of N-PCNFs loaded on a glassy carbon electrode (GCE), the linear response curves of Cd(II) and Pb(II) could be obtained. Due to the unique structural feature and N content, the N-PCNFs possess excellent detection limits of 0.8 mu g L-1 for Cd(II) and 0.3 mu g L-1 for Pb(II) (S/N = 3). To manifest the practical use of the sensor platform the concentration of Cd(II) and Pb(II) in normal tap and waste water were monitored. According to the ICP-MS results, the calculated recovery (97.0-107%) indicates that N-PCNFs have potential as a candidate material to monitor the concentration of Cd(II) and Pb(II) in practical samples.
|
|
| 9. |
- Jiang, Ruyuan, et al.
(författare)
-
A Facile Electrochemical Sensor Based on PyTS-CNTs for Simultaneous Determination of Cadmium and Lead Ions
- 2018
-
Ingår i: Sensors. - : MDPI. - 1424-8220. ; 18:5
-
Tidskriftsartikel (refereegranskat)abstract
- A simple and easy method was implemented for the contemporary detection of cadmium (Cd2+) and lead (Pb2+) ions using 1,3,6,8-pyrenetetrasulfonic acid sodium salt-functionalized carbon nanotubes nanocomposites (PyTS-CNTs). The morphology and composition of the obtained PyTS-CNTs were characterized using scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), and X-ray photoelectron spectroscopy (XPS). The experimental results confirmed that the fabricated PyTS-CNTs exhibited good selectivity and sensitivity for metal ion-sensing owing to the insertion of sulfonic acid groups. For Cd2+ and Pb2+, some of the electrochemical sensing parameters were evaluated by varying data such as the PyTS-CNT quantity loaded on the pyrolytic graphite electrode (PGE), pH of the acetate buffer, deposition time, and deposition potential. These parameters were optimized with differential pulse anodic sweeping voltammetry (DPASV). Under the optimal condition, the stripping peak current of the PyTS-CNTs/Nafion/PGE varies linearly with the heavy metal ion concentration, ranging from 1.0 mu g L-1 to 90 mu g L-1 for Cd2+ and from 1.0 mu g L-1 to 110 mu g L-1 for Pb2+. The limits of detection were estimated to be approximately 0.8 mu g L-1 for Cd2+ and 0.02 mu g L-1 for Pb2+. The proposed PyTS CNTs/Nafion/PGE can be used as a rapid, simple, and controllable electrochemical sensor for the determination of toxic Cd2+ and Pb2+.
|
|
| 10. |
- Jiang, Ruyuan, et al.
(författare)
-
Polysulfide/Graphene Nanocomposite Film for Simultaneous Electrochemical Determination of Cadmium and Lead Ions
- 2018
-
Ingår i: NANO. - : World Scientific. - 1793-2920 .- 1793-7094. ; 13:8
-
Tidskriftsartikel (refereegranskat)abstract
- An integrative electroanalytical method was developed for detecting Cd2+ and Pb2+ ions in aqueous solutions. Polysulfide/graphene (RGO-S) nanocomposites were prepared and their performance as electrochemical sensors for Cd2+ and Pb2+ was evaluated. The RGO-S nanocomposite was carefully characterized by scanning electron microscopy with energy-dispersive X-ray spectrometry, transmission electron microscopy, and X-ray photoelectron spectroscopy. The as-prepared RGO-S was incorporated into a pyrolytic graphite electrode (RGO-S/PGE) and used for detecting trace amount of Cd2+ and Pb2+ by differential pulse anodic stripping voltammetry. Under optimal conditions, the stripping peak current of RGO-S/PGE varies linearly with heavy metal ion concentration in the ranges 2.0-300 mu g L-1 for Cd2+ and 1.0-300 mu g L-1 for Pb2+. The limits of detection for Cd2+ and Pb2+ were estimated to be about 0.67 mu g L-1 and 0.17 mu g L-1, respectively. The prepared electrochemical heavy-metal-detecting electrode provides good repeatability and reproducibility with high sensitivity, making it a suitable candidate for monitoring Cd2+ and Pb2+ concentrations in aqueous environmental samples.
|
|
