| 1. |
|
|
| 2. |
- Klionsky, Daniel J., et al.
(författare)
-
Guidelines for the use and interpretation of assays for monitoring autophagy
- 2012
-
Ingår i: Autophagy. - : Informa UK Limited. - 1554-8635 .- 1554-8627. ; 8:4, s. 445-544
-
Forskningsöversikt (refereegranskat)abstract
- In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field.
|
|
| 3. |
- Lin, Weili, et al.
(författare)
-
A superluminous supernova lightened by collisions with pulsational pair-instability shells
- 2023
-
Ingår i: Nature Astronomy. - 2397-3366. ; 7:7, s. 779-789
-
Tidskriftsartikel (refereegranskat)abstract
- Superluminous supernovae are among the most energetic stellar explosions in the Universe, but their energy sources remain an open question. Here we present long-term observations of one of the closest examples of the hydrogen-poor superluminous supernovae subclass SLSNe-I, supernova SN 2017egm, revealing the most complicated known luminosity evolution of SLSNe-I. Three distinct post-peak bumps were recorded in its light curve collected at about 100–350 days after maximum brightness, challenging current popular power models such as magnetar, fallback accretion, and interaction between ejecta and a circumstellar shell. However, the complex light curve can be well modelled by successive interactions with multiple circumstellar shells with a total mass of about 6.8–7.7 M⊙. In this scenario, large energy deposition from interaction-induced reverse shocks results in ionization of neutral oxygen in the supernova ejecta and hence a much lower nebular-phase line ratio of [O I] λ6,300/([Ca II] + [O II]) λ7,300 (~0.2) compared with that derived for other superluminous and normal stripped-envelope supernovae. The pre-existing multiple shells indicate that the progenitor of SN 2017egm experienced pulsational mass ejections triggered by pair instability within 2 years before explosion, in robust agreement with theoretical predictions for a pre-pulsation helium-core mass of 48–51 M⊙.
|
|
| 4. |
- Hsu, Yu-Hsuan, et al.
(författare)
-
epsilon-Ga2O3 Grown on c-Plane Sapphire by MOCVD with a Multistep Growth Process
- 2022
-
Ingår i: Crystal Growth & Design. - : AMER CHEMICAL SOC. - 1528-7483 .- 1528-7505. ; 22:3
-
Tidskriftsartikel (refereegranskat)abstract
- Gallium oxide (Ga2O3) has especially become popular because of its established applications in semiconductors. Of five polymorphs, monoclinic beta-Ga2O3 is the most thermodynamically stable phase. However, orthorhombic Ga2O3 (also known as epsilon-Ga2O3 or kappa-Ga2O3) is gaining increasing interest due to its high lattice symmetry and peculiar ferroelectricity. Although the structural approach for estimating Ga2O3 has been studied both theoretically and experimentally, epsilon-Ga2O3 and kappa-Ga2O3 are still confused. In this study, epsilon-Ga2O3 epilayers are grown on c-plane sapphire by metal-organic chemical vapor deposition with a multistep growth process. A thin annealed epsilon-Ga2O3 buffer layer is grown in the first step. The sequent growth steps with slow, fast, or combination of slow then fast growth rate significantly influence the quality of epilayers compared with that of directly grown Ga2O3. Through a detailed transmission electron microscopy (TEM) characterization of these Ga2O3 epilayers, the structural relationship between orthorhombic kappa-Ga2O3 and hexagonal epsilon-Ga2O3 is elucidated. A series of first-principles density functional theory calculations are also carried out to confirm the argument.
|
|
| 5. |
- Sampson, Joshua N., et al.
(författare)
-
Analysis of Heritability and Shared Heritability Based on Genome-Wide Association Studies for 13 Cancer Types
- 2015
-
Ingår i: Journal of the National Cancer Institute. - : Oxford University Press (OUP). - 0027-8874 .- 1460-2105. ; 107:12
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Studies of related individuals have consistently demonstrated notable familial aggregation of cancer. We aim to estimate the heritability and genetic correlation attributable to the additive effects of common single-nucleotide polymorphisms (SNPs) for cancer at 13 anatomical sites. Methods: Between 2007 and 2014, the US National Cancer Institute has generated data from genome-wide association studies (GWAS) for 49 492 cancer case patients and 34 131 control patients. We apply novel mixed model methodology (GCTA) to this GWAS data to estimate the heritability of individual cancers, as well as the proportion of heritability attributable to cigarette smoking in smoking-related cancers, and the genetic correlation between pairs of cancers. Results: GWAS heritability was statistically significant at nearly all sites, with the estimates of array-based heritability, h(l)(2), on the liability threshold (LT) scale ranging from 0.05 to 0.38. Estimating the combined heritability of multiple smoking characteristics, we calculate that at least 24% (95% confidence interval [CI] = 14% to 37%) and 7% (95% CI = 4% to 11%) of the heritability for lung and bladder cancer, respectively, can be attributed to genetic determinants of smoking. Most pairs of cancers studied did not show evidence of strong genetic correlation. We found only four pairs of cancers with marginally statistically significant correlations, specifically kidney and testes (rho = 0.73, SE = 0.28), diffuse large B-cell lymphoma (DLBCL) and pediatric osteosarcoma (rho = 0.53, SE = 0.21), DLBCL and chronic lymphocytic leukemia (CLL) (rho = 0.51, SE = 0.18), and bladder and lung (rho = 0.35, SE = 0.14). Correlation analysis also indicates that the genetic architecture of lung cancer differs between a smoking population of European ancestry and a nonsmoking Asian population, allowing for the possibility that the genetic etiology for the same disease can vary by population and environmental exposures. Conclusion: Our results provide important insights into the genetic architecture of cancers and suggest new avenues for investigation.
|
|
| 6. |
- Bairagi, Samiran, et al.
(författare)
-
Formation of quaternary Zn(AlxGa1−x)2O4 epilayers driven by thermally induced interdiffusion between spinel ZnGa2O4 epilayer and Al2O3 substrate
- 2023
-
Ingår i: Materials Today Advances. - : Elsevier. - 2590-0498. ; 20
-
Tidskriftsartikel (refereegranskat)abstract
- Zinc aluminogallate, Zn(AlxGa1−x)2O4 (ZAGO), a single-phase spinel structure, offers considerable potential for high-performance electronic devices due to its expansive compositional miscibility range between aluminum (Al) and gallium (Ga). Direct growth of high-quality ZAGO epilayers however remains problematic due to the high volatility of zinc (Zn). This work highlights a novel synthesis process for high-quality epitaxial quaternary ZAGO thin films on sapphire substrates, achieved through thermal annealing of a ZnGa2O4 (ZGO) epilayer on sapphire in an ambient air setting. In-situ annealing x-ray diffraction measurements show that the incorporation of Al in the ZGO epilayer commenced at 850 °C. The Al content (x) in ZAGO epilayer gradually increased up to around 0.45 as the annealing temperature was raised to 1100 °C, which was confirmed by transmission electron microscopy (TEM) and energy dispersive x-ray spectroscopy. X-ray rocking curve measurement revealed a small full width at half maximum value of 0.72 °, indicating the crystal quality preservation of the ZAGO epilayer with a high Al content. However, an epitaxial intermediate �–(AlxGa1−x)2O3 layer (� - AGO) was formed between the ZAGO and sapphire substrate. This is believed to be a consequence of the interdiffusion of Al and Ga between the ZGO thin film and sapphire substrate. Using density functional theory, the substitution cost of Ga in sapphire was determined to be about 0.5 eV lower than substitution cost of Al in ZGO. Motivated by this energetically favorable substitution, a formation mechanism of the ZAGO and AGO layers was proposed. Spectroscopic ellipsometry studies revealed an increase in total thickness of the film from 105.07 nm (ZGO) to 147.97 nm (ZAGO/AGO) after annealing to 1100 °C, which were corroborated using TEM. Furthermore, an observed increase in the direct (indirect) optical bandgap from 5.06 eV (4.7 eV) to 5.72 eV (5.45 eV) with an increasing Al content in the ZAGO layer further underpins the formation of a quaternary ZAGO alloy with a tunable composition.
|
|
| 7. |
- Birney, Ewan, et al.
(författare)
-
Identification and analysis of functional elements in 1% of the human genome by the ENCODE pilot project
- 2007
-
Ingår i: Nature. - : Springer Science and Business Media LLC. - 0028-0836 .- 1476-4687. ; 447:7146, s. 799-816
-
Tidskriftsartikel (refereegranskat)abstract
- We report the generation and analysis of functional data from multiple, diverse experiments performed on a targeted 1% of the human genome as part of the pilot phase of the ENCODE Project. These data have been further integrated and augmented by a number of evolutionary and computational analyses. Together, our results advance the collective knowledge about human genome function in several major areas. First, our studies provide convincing evidence that the genome is pervasively transcribed, such that the majority of its bases can be found in primary transcripts, including non-protein-coding transcripts, and those that extensively overlap one another. Second, systematic examination of transcriptional regulation has yielded new understanding about transcription start sites, including their relationship to specific regulatory sequences and features of chromatin accessibility and histone modification. Third, a more sophisticated view of chromatin structure has emerged, including its inter-relationship with DNA replication and transcriptional regulation. Finally, integration of these new sources of information, in particular with respect to mammalian evolution based on inter- and intra-species sequence comparisons, has yielded new mechanistic and evolutionary insights concerning the functional landscape of the human genome. Together, these studies are defining a path for pursuit of a more comprehensive characterization of human genome function.
|
|
| 8. |
- Elsayed, Mohamed Hammad, et al.
(författare)
-
Overcoming small-bandgap charge recombination in visible and NIR-light-driven hydrogen evolution by engineering the polymer photocatalyst structure
- 2024
-
Ingår i: Nature Communications. - 2041-1723. ; 15:1
-
Tidskriftsartikel (refereegranskat)abstract
- Designing an organic polymer photocatalyst for efficient hydrogen evolution with visible and near-infrared (NIR) light activity is still a major challenge. Unlike the common behavior of gradually increasing the charge recombination while shrinking the bandgap, we present here a series of polymer nanoparticles (Pdots) based on ITIC and BTIC units with different π-linkers between the acceptor-donor-acceptor (A-D-A) repeated moieties of the polymer. These polymers act as an efficient single polymer photocatalyst for H2 evolution under both visible and NIR light, without combining or hybridizing with other materials. Importantly, the difluorothiophene (ThF) π-linker facilitates the charge transfer between acceptors of different repeated moieties (A-D-A-(π-Linker)-A-D-A), leading to the enhancement of charge separation between D and A. As a result, the PITIC-ThF Pdots exhibit superior hydrogen evolution rates of 279 µmol/h and 20.5 µmol/h with visible (>420 nm) and NIR (>780 nm) light irradiation, respectively. Furthermore, PITIC-ThF Pdots exhibit a promising apparent quantum yield (AQY) at 700 nm (4.76%).
|
|
| 9. |
- Horng, Ray-Hua, et al.
(författare)
-
Effects of UV-ozone treatment on the performance of deep-ultraviolet photodetectors based on ZnGa2O4 epilayers
- 2022
-
Ingår i: Materials Chemistry and Physics. - : ELSEVIER SCIENCE SA. - 0254-0584 .- 1879-3312. ; 292
-
Tidskriftsartikel (refereegranskat)abstract
- ZnGa2O4 epilayers have been grown on sapphire using the metalorganic chemical vapor deposition system. However, there is a trade-off between high conductivity and large defect density (oxygen vacancies) with the growth time of the growth of ZnGa2O4 epilayers. The ultraviolet (UV)-ozone treatment on the ZnGa2O4 epilayer at 100. C was proposed to reduce the number of oxygen vacancies in ZnGa2O4. The effect of UV-ozone treatment on the performance of ZnGa2O4 metal-semiconductor-metal (MSM) photodetector (PD) was evaluated. X-ray photoelectron spectroscopy analysis showed a decrease in the number of oxygen vacancies after UV-ozone treatment of ZnGa2O4. The measured lattice parameter near the surface around 10 nm of untreated ZnGa2O4 was 8.3434 +/- 0.0120 angstrom and increased slightly to 8.3775 +/- 0.0083 A. after UV-ozone treatment due to the decrease in oxygen vacancies. The dark current (at 5 V) of ZnGa2O4 PD was significantly reduced from 251 to 20.2 pA before and after UV-ozone treatment; it resulted in a substantial one-order enhancement in the on/off ratio of the PDs from 2.7 x 10(5) and 2.15 x 10(6) after the UV-ozone treatment. Furthermore, the rejection ratio also improved between 240 and 470 nm from 35 to 84 after UV-ozone treatment. The relationship between photocurrent and light intensity and the improvement in raising and falling time also showed the reduced density of trap states by UV-ozone treatment. This indicates that UV-ozone treatment can enhance the characteristics of ZnGa2O4 PDs for UV sensing applications.
|
|
| 10. |
- Cavaliere, Fabio, et al.
(författare)
-
Towards a unified fronthaul-backhaul data plane for 5G The 5G-Crosshaul project approach
- 2017
-
Ingår i: Computer Standards and Interfaces. - : Elsevier BV. - 0920-5489. ; 51, s. 56-62
-
Tidskriftsartikel (refereegranskat)abstract
- The paper presents a study of key aspects in the design of a flexible unified data plane capable of integrating both fronthaul and backhaul transport in future 5G systems. In this study, we first review candidate access and multiplexing technologies from the state of the art and assess their capability to support legacy and new fronthaul and backhaul traffic. We then propose a new design framework for the targeted flexible unified data plane, featuring a primary packet-switching path supported by an auxiliary circuit-switching for extreme low latency scenarios. This comprises a summary of the first results achieved in the 5G-Crosshaul EU project since its kick-off in July 2015.
|
|
