| 1. |
- Salhotra, Aseem, et al.
(författare)
-
Exploitation of Engineered Light-Switchable Myosin XI for Nanotechnological Applications
- 2023
-
Ingår i: ACS Nano. - : American Chemical Society (ACS). - 1936-0851 .- 1936-086X. ; 17:17, s. 17233-17244
-
Tidskriftsartikel (refereegranskat)abstract
- For certain nanotechnological applications of the contractile proteins actin and myosin, e.g., in biosensing and network-based biocomputation, it would be desirable to temporarily switch on/off motile function in parts of nanostructured devices, e.g., for sorting or programming. Myosin XI motor constructs, engineered with a light-switchable domain for switching actin motility between high and low velocities (light-sensitive motors (LSMs) below), are promising in this regard. However, they were not designed for use in nanotechnology, where longevity of operation, long shelf life, and selectivity of function in specific regions of a nanofabricated network are important. Here, we tested if these criteria can be fulfilled using existing LSM constructs or if additional developments will be required. We demonstrated extended shelf life as well as longevity of the actin-propelling function compared to those in previous studies. We also evaluated several approaches for selective immobilization with a maintained actin propelling function in dedicated nanochannels only. Whereas selectivity was feasible using certain nanopatterning combinations, the reproducibility was not satisfactory. In summary, the study demonstrates the feasibility of using engineered light-controlled myosin XI motors for myosin-driven actin transport in nanotechnological applications. Before use for, e.g., sorting or programming, additional work is however needed to achieve reproducibility of the nanofabrication and, further, optimize the motor properties.
|
|
| 2. |
- Lindberg, Frida W., et al.
(författare)
-
Controlled Surface Silanization for Actin-Myosin and Biocompatibility of New Polymer Resists
- 2018
-
Ingår i: Langmuir. - : American Chemical Society (ACS). - 0743-7463 .- 1520-5827. ; 34:30, s. 8777-8784
-
Tidskriftsartikel (refereegranskat)abstract
- Molecular motor-based nanodevices require organized cytoskeletal filament guiding along motility-promoting tracks, confined by motility-inhibiting walls. One way to enhance motility quality on the tracks, particularly in terms of filament velocity but also the fraction of motile filaments, is to optimize the surface hydrophobicity. We have investigated the potential to achieve this for the actin myosin II motor system on trimethylchlorosilane (TMCS)-derivatized SiO2 surfaces to be used as channel floors in nanodevices. We have also investigated the ability to supress motility on two new polymer resists, TU7 (for nanoimprint lithography) and CSAR 62 (for electron beam and deep UV lithography), to be used as channel walls. We developed a chemical-vapor deposition tool for silanizing SiO2 surfaces in a controlled environment to achieve different surface hydrophobicities (measured by water contact angle). In contrast to previous work, we were able to fabricate a wide range of contact angles by varying the silanization time and chamber pressure using only one type of silane. This resulted in a significant improvement of the silanization procedure, producing a predictable contact angle on the surface and thereby predictable quality of the heavy meromyosin (HMM)-driven actin motility with regard to velocity. We observed a high degree of correlation between the filament sliding velocity and contact angle in the range 10-86 degrees, expanding the previously studied range. We found that the sliding velocity on TU7 surfaces was superior to that on CSAR 62 surfaces despite similar contact angles. In addition, we were able to suppress the motility on both TU7 and CSAR 62 by plasma oxygen treatment before silanization. These results are discussed in relation to previously proposed surface adsorption mechanisms of HMM and their relationship to the water contact angle. Additionally, the results are considered for the development of actin-myosin based nanodevices with superior performance with respect to actin-myosin functionality.
|
|
| 3. |
|
|
| 4. |
- Lindberg, Frida W., et al.
(författare)
-
Design and development of nanoimprint-enabled structures for molecular motor devices
- 2019
-
Ingår i: Materials Research Express. - : IOP Publishing. - 2053-1591. ; 6:2
-
Tidskriftsartikel (refereegranskat)abstract
- Devices based on molecular motor-driven cytoskeletal filaments, e.g., actin filaments, have been developed both for biosensing and biocomputational applications. Commonly, these devices require nanoscaled tracks for guidance of the actin filaments which has limited the patterning technique to electron beam lithography. Thus, large scale systems become intractable to fabricate at a high throughput within a reasonable time-frame. We have studied the possibility to fabricate molecular motor-based devices using the high throughput, high resolution technique of nanoimprint lithography. Molecular motor-based devices require wide open regions (loading zones) to allow filaments to land for later propulsion into the nanoscale tracks. Such open zones are challenging to fabricate using nanoimprint lithography due to the large amount of material displaced in the process. We found that this challenge can be overcome by introducing nanoscaled pillars inside the loading zones, into which material can be displaced during imprint. By optimising the resist thickness, we were able to decrease the amount of material displaced without suffering from insufficient filling of the stamp. Furthermore, simulations suggest that the shape and positioning of the pillars can be used to tailor the overall cytoskeletal filament transportation direction and behaviour. This is a potentially promising design feature for future applications that however, requires further optimisations before experimental realisation.
|
|
| 5. |
- Meinecke, Christoph R., et al.
(författare)
-
Nanolithographic Fabrication Technologies for Network-Based Biocomputation Devices
- 2023
-
Ingår i: Materials. - : MDPI. - 1996-1944. ; 16:3
-
Tidskriftsartikel (refereegranskat)abstract
- Network-based biocomputation (NBC) relies on accurate guiding of biological agents through nanofabricated channels produced by lithographic patterning techniques. Here, we report on the large-scale, wafer-level fabrication of optimized microfluidic channel networks (NBC networks) using electron-beam lithography as the central method. To confirm the functionality of these NBC networks, we solve an instance of a classical non-deterministic-polynomial-time complete ("NP-complete") problem, the subset-sum problem. The propagation of cytoskeletal filaments, e.g., molecular motor-propelled microtubules or actin filaments, relies on a combination of physical and chemical guiding along the channels of an NBC network. Therefore, the nanofabricated channels have to fulfill specific requirements with respect to the biochemical treatment as well as the geometrical confienement, with walls surrounding the floors where functional molecular motors attach. We show how the material stack used for the NBC network can be optimized so that the motor-proteins attach themselves in functional form only to the floor of the channels. Further optimizations in the nanolithographic fabrication processes greatly improve the smoothness of the channel walls and floors, while optimizations in motor-protein expression and purification improve the activity of the motor proteins, and therefore, the motility of the filaments. Together, these optimizations provide us with the opportunity to increase the reliability of our NBC devices. In the future, we expect that these nanolithographic fabrication technologies will enable production of large-scale NBC networks intended to solve substantially larger combinatorial problems that are currently outside the capabilities of conventional software-based solvers.
|
|
| 6. |
- Rahman, Mohammad A., et al.
(författare)
-
Regeneration of Assembled, Molecular-Motor-Based Bionanodevices
- 2019
-
Ingår i: Nano Letters. - : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 19:10, s. 7155-7163
-
Tidskriftsartikel (refereegranskat)abstract
- The guided gliding of cytoskeletal filaments, driven by biomolecular motors on nano/microstructured chips, enables novel applications in biosensing and biocomputation. However, expensive and time-consuming chip production hampers the developments. It is therefore important to establish protocols to regenerate the chips, preferably without the need to dismantle the assembled microfluidic devices which contain the structured chips. We here describe a novel method toward this end. Specifically, we use the small, nonselective proteolytic enzyme, proteinase K to cleave all surface-adsorbed proteins, including myosin and kinesin motors. Subsequently, we apply a detergent (5% SDS or 0.05% Triton X100) to remove the protein remnants. After this procedure, fresh motor proteins and filaments can be added for new experiments. Both, silanized glass surfaces for actin-myosin motility and pure glass surfaces for microtubule-kinesin motility were repeatedly regenerated using this approach. Moreover, we demonstrate the applicability of the method for the regeneration of nano/microstructured silicon-based chips with selectively functionalized areas for supporting or suppressing gliding motility for both motor systems. The results substantiate the versatility and a promising broad use of the method for regenerating a wide range of protein-based nano/microdevices.
|
|
| 7. |
- Reuther, Cordula, et al.
(författare)
-
Molecular motor-driven filament transport across three-dimensional, polymeric micro-junctions
- 2021
-
Ingår i: New Journal of Physics. - : Institute of Physics Publishing (IOPP). - 1367-2630. ; 23:12
-
Tidskriftsartikel (refereegranskat)abstract
- Molecular motor-driven filament systems have been extensively explored for biomedical and nanotechnological applications such as lab-on-chip molecular detection or network-based biocomputation. In these applications, filament transport conventionally occurs in two dimensions (2D), often guided along open, topographically and/or chemically structured channels which are coated by molecular motors. However, at crossing points of different channels the filament direction is less well determined and, though crucial to many applications, reliable guiding across the junction can often not be guaranteed. We here present a three-dimensional (3D) approach that eliminates the possibility for filaments to take wrong turns at junctions by spatially separating the channels crossing each other. Specifically, 3D junctions with tunnels and overpasses were manufactured on glass substrates by two-photon polymerization, a 3D fabrication technology where a tightly focused, femtosecond-pulsed laser is scanned in a layer-to-layer fashion across a photo-polymerizable inorganic-organic hybrid polymer (ORMOCER(R)) with mu m resolution. Solidification of the polymer was confined to the focal volume, enabling the manufacturing of arbitrary 3D microstructures according to computer-aided design data. Successful realization of the 3D junction design was verified by optical and electron microscopy. Most importantly, we demonstrated the reliable transport of filaments, namely microtubules propelled by kinesin-1 motors, across these 3D junctions without junction errors. Our results open up new possibilities for 3D functional elements in biomolecular transport systems, in particular their implementation in biocomputational networks.
|
|
| 8. |
- Salhotra, Aseem, et al.
(författare)
-
Prolonged function and optimization of actomyosin motility for upscaled network-based biocomputation
- 2021
-
Ingår i: New Journal of Physics. - : IOP Publishing. - 1367-2630. ; 23:8
-
Tidskriftsartikel (refereegranskat)abstract
- Significant advancements have been made towards exploitation of naturally available molecular motors and their associated cytoskeletal filaments in nanotechnological applications. For instance, myosin motors and actin filaments from muscle have been used with the aims to establish new approaches in biosensing and network-based biocomputation. The basis for these developments is a version of the in vitro motility assay (IVMA) where surface-adsorbed myosin motors propel the actin filaments along suitably derivatized nano-scale channels on nanostructured chips. These chips are generally assembled into custom-made microfluidic flow cells. For effective applications, particularly in biocomputation, it is important to appreciably prolong function of the biological system. Here, we systematically investigated potentially critical factors necessary to achieve this, such as biocompatibility of different components of the flow cell, the degree of air exposure, assay solution composition and nanofabrication methods. After optimizing these factors we prolonged the function of actin and myosin in nanodevices for biocomputation from 60 min. In addition, we demonstrated that further optimizations could increase motility run times to >20 h. Of great importance for the latter development was a switch of glucose oxidase in the chemical oxygen scavenger system (glucose oxidase-glucose-catalase) to pyranose oxidase, combined with the use of blocking actin (non-fluorescent filaments that block dead motors). To allow effective testing of these approaches we adapted commercially available microfluidic channel slides, for the first time demonstrating their usefulness in the IVMA. As part of our study, we also demonstrate that myosin motor fragments can be stored at -80 degrees C for more than 10 years before use for nanotechnological purposes. This extended shelf-life is important for the sustainability of network-based biocomputation.
|
|
