| 1. |
- Gulich, S., et al.
(författare)
-
Engineering streptococcal protein G for increased alkaline stability
- 2002
-
Ingår i: Protein Engineering. - : Oxford University Press (OUP). - 0269-2139 .- 1460-213X. ; 15:10, s. 835-842
-
Tidskriftsartikel (refereegranskat)abstract
- Most protein-based affinity chromatography media are very sensitive towards alkaline treatment, which is a preferred method for regeneration and removal of contaminants from the purification devices in industrial applications. In a previous study, we concluded that a simple and straightforward strategy consisting of replacing asparagine residues could improve the stability towards alkaline conditions. In this study, we have shown the potential of this rationale by stabilizing an IgG-binding domain of streptococcal protein G, i.e. the C2 domain. In order to analyze the contribution of the different amino acids to the alkaline sensitivity of the domain we used a single point mutation strategy. Amino acids known to be susceptible towards high pH, asparagine and glutamine, were substituted for less-alkali-susceptible residues. In addition, aspartic acid residues were mutated to evaluate if the stability could be further increased. The stability of the different C2 variants was subsequently analyzed by exposing them to NaOH. The obtained results reveal that the most sensitive amino acid towards alkaline conditions in the structure of C2 is Asn36. The double mutant, C2(N7,36A), was found to be the most stable mutant constructed. In addition to the increased alkaline stability and also very important for potential use as an affinity ligand, this mutated variant also retains the secondary structure, as well as the affinity to the Fc fragment of IgG.
|
|
| 2. |
- Gulich, S., et al.
(författare)
-
Stability towards alkaline conditions can be engineered into a protein ligand
- 2000
-
Ingår i: Journal of Biotechnology. - 0168-1656 .- 1873-4863. ; 80:2, s. 169-178
-
Tidskriftsartikel (refereegranskat)abstract
- One of the problems with a proteinaceous affinity ligand is their sensitivity to alkaline conditions. Here, we show that a simple and straightforward strategy consisting of replacing all asparagine residues with other amino acids can dramatically improve the chemical stability of a protein towards alkaline conditions. As a model, a Streptococcal albumin-binding domain (ABD) was used. The engineered variant showed higher stability towards 0.5 M NaOH, as well as higher thermal stability compared to its native counterpart. This protein engineering approach could potentially also be used for other protein ligands to eliminate the sensitivity to alkaline cleaning-in-place (CIP) conditions.
|
|
| 3. |
- Linhult, M., et al.
(författare)
-
Affinity ligands for industrial protein purification
- 2005
-
Ingår i: Protein peptide letters. - : Bentham Science Publishers Ltd.. - 0929-8665 .- 1875-5305. ; 12:4, s. 305-310
-
Forskningsöversikt (refereegranskat)abstract
- Significant efforts are put into the design of large-scale purification processes of proteins due to great demands regarding cost efficiency and safety. In order to design an effective purification scheme the unit operations need to be reduced to a minimum. In this review we are discussing proteinaceous ligands as well as small synthetic mimics for use in affinity chromatography for large-scale applications. Different advantages as well as drawbacks of the two approaches are outlined.
|
|
| 4. |
- Linhult, M., et al.
(författare)
-
Evaluation of different linker regions for multimerization and coupling chemistry for immobilization of a proteinaceous affinity ligand
- 2003
-
Ingår i: Protein Engineering. - : Oxford University Press (OUP). - 0269-2139 .- 1460-213X. ; 16:12, s. 1147-1152
-
Tidskriftsartikel (refereegranskat)abstract
- Alkaline conditions are generally preferred for sanitization of chromatography media by cleaning-in-place (CIP) protocols in industrial biopharmaceutical processes. The use of such rigorous conditions places stringent demands on the stability of ligands intended for use in affinity chromatography. Here, we describe efforts to meet these requirements for a divalent proteinaceous human serum albumin (HSA) binding ligand, denoted ABD* dimer. The ABD* dimer ligand was constructed by genetic head-to-tail linkage of two copies of the ABD* moiety, which is a monovalent and alkali-stabilized variant of one of the serum albumin-binding motifs of streptococcal protein G. Dimerization was performed to investigate whether a higher HSA-binding capacity could be obtained by ligand multimerization. We also investigated the influence on alkaline stability and HSA-binding capacity of three variants (VDANS, VDADS and GGGSG) of the inter-domain linker. Biosensor binding studies showed that divalent ligands coupled using non-directed chemistry demonstrate an increased molar HSA-binding capacity compared with monovalent ligands. In contrast, equal molar binding capacities were observed for both types of ligands when using directed ligand coupling chemistry involving the introduction and recruitment of a unique C-terminal cysteine residue. Significantly higher molar binding capacities were also detected when using the directed coupling chemistry. These results were confirmed in affinity chromatography binding capacity experiments, using resins containing thiol-coupled ligands. Interestingly, column sanitization studies involving exposure to 0.1 M NaOH solution ( pH 13) showed that of all the tested constructs, including the monovalent ligand, the divalent ligand construct containing the VDADS linker sequence was the most stable, retaining 95% of its binding capacity after 7 h of alkaline treatment.
|
|
| 5. |
- Linhult, M., et al.
(författare)
-
Improving the tolerance of a protein a analogue to repeated alkaline exposures using a bypass mutagenesis approach
- 2004
-
Ingår i: Proteins. - : Wiley. - 0887-3585 .- 1097-0134. ; 55:2, s. 407-416
-
Tidskriftsartikel (refereegranskat)abstract
- Staphylococcal protein A (SPA) is a cell surface protein expressed by Staphylococcus aureus. It consists of five repetitive domains. The five SPA-domains show individual interaction to the Fc-fragment as well as certain Fab-fragments of immunoglobulin G (IgG) from most mammalian species. Due to the high affinity and selectivity of SPA, it has a widespread use as an affinity ligand for capture and purification of antibodies. One of the problems with proteinaceous affinity ligands in large-scale purification is their sensitivity to alkaline conditions. SPA however, is considered relatively stable to alkaline treatment. Nevertheless, it is desirable to further improve the stability in order to enable an SPA-based affinity medium to withstand even longer exposure to the harsh conditions associated with cleaning-in-place (CIP) procedures. For this purpose, a protein engineering strategy, which was used earlier for stabilization and consists of replacing the asparagine residues, is employed. Since Z in its nonengineered form already has a significant tolerance to alkaline treatment, small changes in stability due to the mutations are difficult to assess. Hence, in order to enable detection of improvements regarding the alkaline resistance of the Z domain, we chose to use a bypass mutagenesis strategy using a mutated variant Z(F30A) as a surrogate framework. Z(F30A) has earlier been shown to possess an affinity to IgG that is similar to the wild-type but also demonstrates decreased structural stability. Since the contribution of the different asparagine residues to the deactivation rate of a ligand is dependent on the environment and also the structural flexibility of the particular region, it is important to consider all sensitive amino acids one by one. The parental Z-domain contains eight asparagine residues, each with a different impact on the alkaline stability of the domain. By exchanging asparagine 23 for a threonine, we were able to increase the stability of the Z(F30A) domain in alkaline conditions. Also, when grafting the N23T mutation to the Z scaffold, we were able to detect an increased tolerance to alkaline treatment compared to the native Z molecule.
|
|
| 6. |
- Linhult, M., et al.
(författare)
-
Mutational analysis of the interaction between albumin-binding domain from streptococcal protein G and human serum albumin
- 2002
-
Ingår i: Protein Science. - : Wiley. - 0961-8368 .- 1469-896X. ; 11:2, s. 206-213
-
Tidskriftsartikel (refereegranskat)abstract
- Streptococcal protein G (SpG) is a bacterial cell surface receptor exhibiting affinity to both human immunoglobulin (IgG) and human serum albumin (HSA). Interestingly, the serum albumin and immunoglobulin-binding activities have been shown to reside at functionally and structurally separated receptor domains. The binding domain of the HSA-binding part has been shown to be a 46-residue triple a-helical structure, but the binding site to HSA has not yet been determined. Here, we have investigated the precise binding region of this bacterial receptor by protein engineering applying an alanine-scanning procedure followed by binding studies by surface plasmon resonance (SPR). The secondary structure as well as the HSA binding of the resulting albumin-binding domain (ABD) variants were analyzed using, circular dichroism. (CD) and affinity blotting. The analysis shows that the HSA binding involves residues mainly in the second alpha-helix.
|
|
