| 1. |
- Duan, Ningyuan, et al.
(författare)
-
Reduction of NiGe/n- and p-Ge Specific Contact Resistivity by Enhanced Dopant Segregation in the Presence of Carbon During Nickel Germanidation
- 2016
-
Ingår i: IEEE Transactions on Electron Devices. - : IEEE. - 0018-9383 .- 1557-9646. ; 63:11, s. 4546-4549
-
Tidskriftsartikel (refereegranskat)abstract
- This brief explores the specific contact resistivity (rho(c)) of NiGe/n- and p-Ge contacts with and without carbon pregermanidation implantation. It is found that in the presence of carbon, not only the thermal stability of NiGe films is improved, but also the rho(c) of the NiGe/n- and p-Ge contacts is reduced remarkably due to enhanced phosphorus (P) and boron (B) dopant segregation (DS) at the NiGe/Ge interface after nickel germanidation. At 500 degrees C germanidation temperature, the.c values are reduced from 1.1 x 10(-4) Omega-cm(2) and 2.9 x 10(-5) Omega-cm(2) for NiGe/n- and p-Ge contacts without carbon to 7.3 x 10(-5) Omega-cm(2) and 1.4 x 10(-5) Omega-cm(2) for their counterparts with carbon, respectively.
|
|
| 2. |
- Liu, Jinbiao, et al.
(författare)
-
Study of n-type doping in germanium by temperature based PF+ implantation
- 2020
-
Ingår i: Journal of materials science. Materials in electronics. - : Springer Science and Business Media LLC. - 0957-4522 .- 1573-482X. ; 31, s. 161-166
-
Tidskriftsartikel (refereegranskat)abstract
- Incorporation of P in germanium was studied by using PF+ molecular implantation in a range from room temperature to 400 °C. The presence of F acted as a barrier for P in-diffusion and resulted in higher activation of P at room temperature. In addition, it is found that when the implantation is performed at 400 °C, the residual defects are stable and the diffusion of P can be blocked during activation annealing. Therefore, the final junction depth could be well controlled by the implantation process itself. This method is meaningful for the shallow junction formation in sub 14-nm Ge-based FinFETs or high-performance photodetectors.
|
|
| 3. |
- Qin, Changliang, et al.
(författare)
-
Process optimizations to recessed e-SiGe source/drain for performance enhancement in 22 nm all-last high-k/metal-gate pMOSFETs
- 2016
-
Ingår i: Solid-State Electronics. - : Elsevier. - 0038-1101 .- 1879-2405. ; 123, s. 38-43
-
Tidskriftsartikel (refereegranskat)abstract
- In this paper, the technology of recessed embedded SiGe (e-SiGe) source/drain (S/D) module is optimized for the performance enhancement in 22 nm all-last high-k/metal-gate (HK/MG) pMOSFETs. Different Si recess-etch techniques were applied in S/D regions to increase the strain in the channel and subsequently, improve the performance of transistors. A new recess-etch method consists of a two-step etch method is proposed. This process is an initial anisotropic etch for the formation of shallow trench followed by a final isotropic etch. By introducing the definition of the upper edge distance (D) between the recessed S/D region and the channel region, the process advantage of the new approach is clearly presented. It decreases the value of D than those by conventional one-step isotropic or anisotropic etch of Si. Therefore, the series resistance is reduced and the channel strain is increased, which confirmed by the simulation results. The physical reason of D reducing is analyzed in brief. Applying this recess design, the implant conditions for S/D extension (SDE) are also optimized by using a two-step implantation of BF2 in SiGe layers. The overlap space between doping junction and channel region has great effect on the device's performance. The designed implantation profile decreases the overlap space while keeps a shallow junction depth for a controllable short channel effect. The channel resistance as well as the transfer ID-VG curves varying with different process conditions are demonstrated. It shows the drive current of the device with the optimized SDE implant condition and Si recess-etch process is obviously improved. The change trend of on-off current distributions extracted from a series of devices confirmed the conclusions. This study provides a useful guideline for developing high performance strained PMOS SiGe technology.
|
|
| 4. |
- Radamson, Henry H., et al.
(författare)
-
State of the Art and Future Perspectives in Advanced CMOS Technology
- 2020
-
Ingår i: Nanomaterials. - : MDPI AG. - 2079-4991. ; 10:8
-
Forskningsöversikt (refereegranskat)abstract
- The international technology roadmap of semiconductors (ITRS) is approaching the historical end point and we observe that the semiconductor industry is driving complementary metal oxide semiconductor (CMOS) further towards unknown zones. Today's transistors with 3D structure and integrated advanced strain engineering differ radically from the original planar 2D ones due to the scaling down of the gate and source/drain regions according to Moore's law. This article presents a review of new architectures, simulation methods, and process technology for nano-scale transistors on the approach to the end of ITRS technology. The discussions cover innovative methods, challenges and difficulties in device processing, as well as new metrology techniques that may appear in the near future.
|
|
| 5. |
- Radamson, Henry H., et al.
(författare)
-
The Challenges of Advanced CMOS Process from 2D to 3D
- 2017
-
Ingår i: Applied Sciences. - : MDPI AG. - 2076-3417. ; 7:10
-
Forskningsöversikt (refereegranskat)abstract
- The architecture, size and density of metal oxide field effect transistors (MOSFETs) as unit bricks in integrated circuits (ICs) have constantly changed during the past five decades. The driving force for such scientific and technological development is to reduce the production price, power consumption and faster carrier transport in the transistor channel. Therefore, many challenges and difficulties have been merged in the processing of transistors which have to be dealed and solved. This article highlights the transition from 2D planar MOSFETs to 3D fin field effective transistors (FinFETs) and then presents how the process flow faces different technological challenges. The discussions contain nano-scaled patterning and process issues related to gate and (source/drain) S/D formation as well as integration of III-V materials for high carrier mobility in channel for future FinFETs.
|
|
| 6. |
- Wang, Guilei, et al.
(författare)
-
Growth of SiGe layers in source and drain regions for 10 nm node complementary metal-oxide semiconductor (CMOS)
- 2020
-
Ingår i: Journal of materials science. Materials in electronics. - : Springer Science and Business Media LLC. - 0957-4522 .- 1573-482X. ; 31, s. 26-33
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, the integration of Si 1−x Ge x (50% ≤ x ≤ 60%) selective epitaxy on source/drain regions in 10 nm node FinFET has been presented. One of the major process issues was the sensitivity of Si-fins’ shape to ex- and in-situ cleaning prior to epitaxy. For example, the sharpness of Si-fins could easily be damaged during the wafer washing. The results showed that a DHF dip before the normal cleaning, was essential to clean the Si-fins while in-situ annealing in range of 780–800 °C was needed to remove the native oxide for high epitaxial quality. Because of smallness of fins, the induced strain by SiGe could not be directly measured by X-ray beam in a typical XRD tool in the lab or even in a Synchrotron facility. Further analysis using nano-beam diffraction technique in high-resolution transmission electron microscope also failed to provide information about strain in the FinFET structure. Therefore, the induced strain by SiGe was simulated by technology computer-aided design program and the Ge content was measured by using energy dispersive spectroscopy. Simulation results showed 0.8, 1 and 1.3 GPa for Ge content of 40%, 50% and 60%, respectively. A kinetic gas model was also introduced to predict the SiGe profile on Si-fins with sharp triangular shape. The input parameters in the model includes growth temperature, partial pressure of the reactant gases and the exposed Si coverage in the chip area.
|
|
| 7. |
- Wang, Guilei, et al.
(författare)
-
Integration of Highly Strained SiGe in Source and Drain with HK and MG for 22 nm Bulk PMOS Transistors
- 2017
-
Ingår i: Nanoscale Research Letters. - : Springer. - 1931-7573 .- 1556-276X. ; 12
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, the integration of SiGe selective epitaxy on source/drain regions and high-k and metal gate for 22 nm node bulk pMOS transistors has been presented. Selective Si1-xGex growth (0.35 <= x <= 0.40) with boron concentration of 1-3 x 10(20) cm(-3) was used to elevate the source/drain. The main focus was optimization of the growth parameters to improve the epitaxial quality where the high-resolution x-ray diffraction (HRXRD) and energy dispersive spectrometer (EDS) measurement data provided the key information about Ge profile in the transistor structure. The induced strain by SiGe layers was directly measured by x-ray on the array of transistors. In these measurements, the boron concentration was determined from the strain compensation of intrinsic and boron-doped SiGe layers. Finally, the characteristic of transistors were measured and discussed showing good device performance.
|
|
| 8. |
- Wang, Guilei, et al.
(författare)
-
pMOSFETs Featuring ALD W Filling Metal Using SiH4 and B2H6 Precursors in 22 nm Node CMOS Technology
- 2017
-
Ingår i: Nanoscale Research Letters. - : SPRINGER. - 1931-7573 .- 1556-276X. ; 12
-
Tidskriftsartikel (refereegranskat)abstract
- In this paper, pMOSFETs featuring atomic layer deposition (ALD) tungsten (W) using SiH4 and B2H6 precursors in 22 nm node CMOS technology were investigated. It is found that, in terms of threshold voltage, driving capability, carrier mobility, and the control of short-channel effects, the performance of devices featuring ALD W using SiH4 is superior to that of devices featuring ALD W using B2H6. This disparity in device performance results from different metal gate-induced strain from ALD W using SiH4 and B2H6 precursors, i.e. tensile stresses for SiH4 (similar to 2.4 GPa) and for B2H6 (similar to 0.9 GPa).
|
|
