1. |
- Beal, Jacob, et al.
(författare)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
Ingår i: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Tidskriftsartikel (refereegranskat)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
2. |
-
- 2019
-
Tidskriftsartikel (refereegranskat)
|
|
3. |
- Chang, Jui-Che, et al.
(författare)
-
HiPIMS-grown AlN buffer for threading dislocation reduction in DC-magnetron sputtered GaN epifilm on sapphire substrate
- 2023
-
Ingår i: Vacuum. - : PERGAMON-ELSEVIER SCIENCE LTD. - 0042-207X .- 1879-2715. ; 217
-
Tidskriftsartikel (refereegranskat)abstract
- Gallium nitride (GaN) epitaxial films on sapphire (Al2O3) substrates have been grown using reactive magnetron sputter epitaxy with a liquid Ga target. Threading dislocations density (TDD) of sputtered GaN films was reduced by using an inserted high-quality aluminum nitride (AlN) buffer layer grown by reactive high power impulse magnetron sputtering (R-HiPIMS) in a gas mixture of Ar and N2. After optimizing the Ar/N2 pressure ratio and deposition power, a high-quality AlN film exhibiting a narrow full-width at half-maximum (FWHM) value of the double-crystal x-ray rocking curve (DCXRC) of the AlN(0002) peak of 0.086° was obtained by R-HiPIMS. The mechanism giving rise the observed quality improvement is attributed to the enhancement of kinetic energy of the adatoms in the deposition process when operated in a transition mode. With the inserted HiPIMS-AlN as a buffer layer for direct current magnetron sputtering (DCMS) GaN growth, the FWHM values of GaN(0002) and (10 1‾ 1) XRC decrease from 0.321° to 0.087° and from 0.596° to 0.562°, compared to the direct growth of GaN on sapphire, respectively. An order of magnitude reduction from 2.7 × 109 cm−2 to 2.0 × 108 cm−2 of screw-type TDD calculated from the FWHM of the XRC data using the inserted HiPIMS-AlN buffer layer demonstrates the improvement of crystal quality of GaN. The result of TDD reduction using the HiPIMS-AlN buffer was also verified by weak beam dark-field (WBDF) cross-sectional transmission electron microscopy (TEM).
|
|
4. |
|
|
5. |
- Lo, Yi-Ling, et al.
(författare)
-
Determination of effective Ga/N ratio to control GaN growth behavior in liquid-target reactive magnetron sputter epitaxy
- 2024
-
Ingår i: Materials Science in Semiconductor Processing. - : ELSEVIER SCI LTD. - 1369-8001 .- 1873-4081. ; 176
-
Tidskriftsartikel (refereegranskat)abstract
- The optimization of magnetron sputter epitaxy (MSE) for the high -volume production of high -quality GaN films is increasingly important. This study concerns the influence of key MSE process parameters - including the partial pressure of process gas, target -to -substrate distance (TSD), and growth temperature (TG) - for the synthesis of GaN thin films using a liquid Ga target. It is observed that the effective Ga/N ratio on the substrate surface determines the film's growth behavior and affects material's composition and luminescence properties. A lower Ar/N2 partial pressure ratio substantially enhances the crystalline quality, evidenced by the reduction in peak width of x-ray rocking curves from approximately 1.25 degrees (N -rich regime) to 0.35 degrees (Ga-rich regime) and improved GaN bandgap emission. While target sputtered in a highly Ga-rich condition significantly reduces the GaN growth rate (R), primarily due to Ga desorption in nitrogen -limited condition at elevated TG. Ion mass spectrometry and rate monitor measurements demonstrate that the Ga/N ratio can be controlled by adjusting Ar/N2 pressure ratio in MSE process. A reduction in TSD from 9.3 cm to 7 cm resulted in an increased R from 541 nm/h to 731 nm/h, corroborated by Simulation of Metal Transport (SIMTRA) analysis. Temperature -dependent studies revealed that films grown above 900 degrees C exhibited flat surface with high crystalline quality.
|
|
6. |
- Niemi, MEK, et al.
(författare)
-
- 2021
-
swepub:Mat__t
|
|