| 1. |
- Kristanl, Matej, et al.
(författare)
-
The Seventh Visual Object Tracking VOT2019 Challenge Results
- 2019
-
Ingår i: 2019 IEEE/CVF INTERNATIONAL CONFERENCE ON COMPUTER VISION WORKSHOPS (ICCVW). - : IEEE COMPUTER SOC. - 9781728150239 ; , s. 2206-2241
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2019 is the seventh annual tracker benchmarking activity organized by the VOT initiative. Results of 81 trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in the recent years. The evaluation included the standard VOT and other popular methodologies for short-term tracking analysis as well as the standard VOT methodology for long-term tracking analysis. The VOT2019 challenge was composed of five challenges focusing on different tracking domains: (i) VOT-ST2019 challenge focused on short-term tracking in RGB, (ii) VOT-RT2019 challenge focused on "real-time" short-term tracking in RGB, (iii) VOT-LT2019 focused on long-term tracking namely coping with target disappearance and reappearance. Two new challenges have been introduced: (iv) VOT-RGBT2019 challenge focused on short-term tracking in RGB and thermal imagery and (v) VOT-RGBD2019 challenge focused on long-term tracking in RGB and depth imagery. The VOT-ST2019, VOT-RT2019 and VOT-LT2019 datasets were refreshed while new datasets were introduced for VOT-RGBT2019 and VOT-RGBD2019. The VOT toolkit has been updated to support both standard short-term, long-term tracking and tracking with multi-channel imagery. Performance of the tested trackers typically by far exceeds standard baselines. The source code for most of the trackers is publicly available from the VOT page. The dataset, the evaluation kit and the results are publicly available at the challenge website(1).
|
|
| 2. |
- Ji, Yuanhui, et al.
(författare)
-
Modeling of specific structure crystallization coupling with dissolution
- 2010
-
Ingår i: Frontiers of Chemical Science and Engineering. - : Springer Science and Business Media LLC. - 1673-7369. ; 4:1, s. 52-56
-
Tidskriftsartikel (refereegranskat)abstract
- In this paper, the research framework for specific structure crystallization modeling has been proposed in which four steps are required in order to investigate the rigorous crystallization modeling by thermodynamics. The first is the activity coefficient model of the solution, the second is Solid-Liquid equilibrium, the third and fourth are the dissolution and crystallization kinetics modeling, respectively. Our investigations show that the mechanisms of complex structure formation and microphase transition can be analyzed by combining the dissolution and crystallization kinetics modeling. Moreover, the formation mechanism of the porous KCl has been analyzed, which may provide a reference for the porous structure formation in the advanced material synthesis
|
|
| 3. |
- Jia, Xiaoyu, et al.
(författare)
-
Chemical and Structural Engineering of Gelatin-Based Delivery Systems for Therapeutic Applications : A Review
- 2024
-
Ingår i: Biomacromolecules. - : American Chemical Society (ACS). - 1525-7797 .- 1526-4602. ; 25:2, s. 564-589
-
Forskningsöversikt (refereegranskat)abstract
- As a biodegradable and biocompatible protein derived from collagen, gelatin has been extensively exploited as a fundamental component of biological scaffolds and drug delivery systems for precise medicine. The easily engineered gelatin holds great promise in formulating various delivery systems to protect and enhance the efficacy of drugs for improving the safety and effectiveness of numerous pharmaceuticals. The remarkable biocompatibility and adjustable mechanical properties of gelatin permit the construction of active 3D scaffolds to accelerate the regeneration of injured tissues and organs. In this Review, we delve into diverse strategies for fabricating and functionalizing gelatin-based structures, which are applicable to gene and drug delivery as well as tissue engineering. We emphasized the advantages of various gelatin derivatives, including methacryloyl gelatin, polyethylene glycol-modified gelatin, thiolated gelatin, and alendronate-modified gelatin. These derivatives exhibit excellent physicochemical and biological properties, allowing the fabrication of tailor-made structures for biomedical applications. Additionally, we explored the latest developments in the modulation of their physicochemical properties by combining additive materials and manufacturing platforms, outlining the design of multifunctional gelatin-based micro-, nano-, and macrostructures. While discussing the current limitations, we also addressed the challenges that need to be overcome for clinical translation, including high manufacturing costs, limited application scenarios, and potential immunogenicity. This Review provides insight into how the structural and chemical engineering of gelatin can be leveraged to pave the way for significant advancements in biomedical applications and the improvement of patient outcomes.
|
|
| 4. |
- Kristan, Matej, et al.
(författare)
-
The Visual Object Tracking VOT2017 challenge results
- 2017
-
Ingår i: 2017 IEEE INTERNATIONAL CONFERENCE ON COMPUTER VISION WORKSHOPS (ICCVW 2017). - : IEEE. - 9781538610343 ; , s. 1949-1972
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2017 is the fifth annual tracker benchmarking activity organized by the VOT initiative. Results of 51 trackers are presented; many are state-of-the-art published at major computer vision conferences or journals in recent years. The evaluation included the standard VOT and other popular methodologies and a new "real-time" experiment simulating a situation where a tracker processes images as if provided by a continuously running sensor. Performance of the tested trackers typically by far exceeds standard baselines. The source code for most of the trackers is publicly available from the VOT page. The VOT2017 goes beyond its predecessors by (i) improving the VOT public dataset and introducing a separate VOT2017 sequestered dataset, (ii) introducing a realtime tracking experiment and (iii) releasing a redesigned toolkit that supports complex experiments. The dataset, the evaluation kit and the results are publicly available at the challenge website(1).
|
|
| 5. |
- Li, Haohao, et al.
(författare)
-
Atomic Layer Deposition of Buffer Layers for the Growth of Vertically Aligned Carbon Nanotube Arrays
- 2019
-
Ingår i: Nanoscale Research Letters. - : Springer Science and Business Media LLC. - 1556-276X .- 1931-7573. ; 14
-
Tidskriftsartikel (refereegranskat)abstract
- Vertically aligned carbon nanotube arrays (VACNTs) show a great potential for various applications, such as thermal interface materials (TIMs). Besides the thermally oxidized SiO 2 , atomic layer deposition (ALD) was also used to synthesize oxide buffer layers before the deposition of the catalyst, such as Al 2 O 3 , TiO 2 , and ZnO. The growth of VACNTs was found to be largely dependent on different oxide buffer layers, which generally prevented the diffusion of the catalyst into the substrate. Among them, the thickest and densest VACNTs could be achieved on Al 2 O 3 , and carbon nanotubes were mostly triple-walled. Besides, the deposition temperature was critical to the growth of VACNTs on Al 2 O 3 , and their growth rate obviously reduced above 650 °C, which might be related to the Ostwald ripening of the catalyst nanoparticles or subsurface diffusion of the catalyst. Furthermore, the VACNTs/graphene composite film was prepared as the thermal interface material. The VACNTs and graphene were proved to be the effective vertical and transverse heat transfer pathways in it, respectively.
|
|
| 6. |
- Li, Haohao, et al.
(författare)
-
Chemical Vapor Deposition of Vertically Aligned Carbon Nanotube Arrays: Critical Effects of Oxide Buffer Layers
- 2019
-
Ingår i: Nanoscale Research Letters. - : Springer Science and Business Media LLC. - 1556-276X .- 1931-7573. ; 14
-
Tidskriftsartikel (refereegranskat)abstract
- Vertically aligned carbon nanotubes (VACNTs) were synthesized on different oxide buffer layers using chemical vapor deposition (CVD). The growth of the VACNTs was mainly determined by three factors: the Ostwald ripening of catalyst nanoparticles, subsurface diffusion of Fe, and their activation energy for nucleation and initial growth. The surface roughness of buffer layers largely influenced the diameter and density of catalyst nanoparticles after annealing, which apparently affected the lifetime of the nanoparticles and the thickness of the prepared VACNTs. In addition, the growth of the VACNTs was also affected by the deposition temperature, and the lifetime of the catalyst nanoparticles apparently decreased when the deposition temperature was greater than 600 °C due to their serious Ostwald ripening. Furthermore, in addition to the number of catalyst nanoparticles, the density of the VACNTs was also largely dependent on their activation energy for nucleation and initial growth.
|
|
| 7. |
- Liu, Chang, et al.
(författare)
-
The biomethane producing potential in China : A theoretical and practical estimation
- 2016
-
Ingår i: Chinese Journal of Chemical Engineering. - : Elsevier BV. - 1004-9541 .- 2210-321X. ; 24:7, s. 920-928
-
Tidskriftsartikel (refereegranskat)abstract
- Biomethane has been developed rapidly in many countries as a renewable energy which upgraded from biogas. China also began to pay attention to it even though we still at a initial stage, primarily, understanding the biomethane potential and development prospect, choosing appropriate biomass as the biomethane source is very important. In this work, the theoretical and practical biomethane producing potential from five main biomass resources in China were estimated with appropriate methods based on the data collected, and during calculation, two appropriate energy crops were assumed to be planted on marginal lands for biomethane production. Our estimation showed that the theoretical and practical biomethane potentials in China can reach to 888.78 and 316.30 billion m3 per year, agricultural waste should be the preferential development biomass, and planting energy crops on marginal lands is the most promising way to enhance biomethane production in China. When compared with natural gas, Chinese natural gas consumption in 2013 only account for 48.15 % of the practical biomethane potential.
|
|
| 8. |
- Yang, Lulu, et al.
(författare)
-
Association of accelerometer-derived circadian abnormalities and genetic risk with incidence of atrial fibrillation
- 2023
-
Ingår i: npj Digital Medicine. - : Springer Nature. - 2398-6352. ; 6:1
-
Tidskriftsartikel (refereegranskat)abstract
- Evidence suggests potential links between circadian rhythm and atrial fibrillation (AF). However, whether circadian disruption can predict the onset of AF in the general population remains largely unknown. We aim to investigate the association of accelerometer-measured circadian rest-activity rhythm (CRAR, the most prominent circadian rhythm in humans) with the risk of AF, and examine joint associations and potential interactions of CRAR and genetic susceptibility with AF incidence. We include 62,927 white British participants of UK Biobank without AF at baseline. CRAR characteristics, including amplitude (strength), acrophase (timing of peak activity), pseudo-F (robustness), and mesor (height), are derived by applying an extended cosine model. Genetic risk is assessed with polygenic risk scores. The outcome is the incidence of AF. During a median follow-up of 6.16 years, 1920 participants developed AF. Low amplitude [hazard ratio (HR): 1.41, 95% confidence interval (CI): 1.25-1.58], delayed acrophase (HR: 1.24, 95% CI: 1.10-1.39), and low mesor (HR: 1.36, 95% CI: 1.21-1.52), but not low pseudo-F, are significantly associated with a higher risk of AF. No significant interactions between CRAR characteristics and genetic risk are observed. Joint association analyses reveal that participants with unfavourable CRAR characteristics and high genetic risk yield the highest risk of incident AF. These associations are robust after controlling for multiple testing and in a series of sensitivity analyses. Accelerometer-measured CRAR abnormalities, characterized by decreased strength and height, and later timing of peak activity of circadian rhythm, are associated with a higher risk of AF in the general population.
|
|
