| 1. |
- Lundsberg, Jonathan, et al.
(författare)
-
Compressed spike-triggered averaging in iterative decomposition of surface EMG
- 2023
-
Ingår i: Computer Methods and Programs in Biomedicine. - : Elsevier BV. - 0169-2607. ; 228
-
Tidskriftsartikel (refereegranskat)abstract
- Background and Objective: Analysis of motor unit activity is important for assessing and treating diseases or injuries affecting natural movement. State-of-the-art decomposition translates high-density surface electromyography (HDsEMG) into motor unit activity. However, current decomposition methods offer far from complete separation of all motor units. Methods: This paper proposes a peel-offapproach to automatic decomposition of HDsEMG into motor unit action potential (MUAP) trains, based on the Fast Independent Component Analysis algorithm (FastICA). The novel steps include utilizing compression by means of Principal Component Analysis and spike-triggered averaging, to estimate surface MUAP distributions with less noise, which are iteratively subtracted from the HDsEMG dataset. Furthermore, motor unit spike trains are estimated by highdimensional density-based clustering of peaks in the FastICA source output. And finally, a new reliability measure is used to discard poor motor unit estimates by comparing the variance of the FastICA source output before and after the peel-offstep. The method was validated using reconstructed synthetic data at three different signal-to-noise levels and was compared to an established deflationary FastICA approach. Results: Both algorithms had very high recall and precision, over 90%, for spikes from matching motor units, referred to as matched performance. However, the peel-offalgorithm correctly identified more motor units for all noise levels. When accounting for unidentified motor units, total recall was up to 33 percentage points higher; and when accounting for duplicate estimates, total precision was up to 24 percentage points higher, compared to the state-of-the-art reference. In addition, a comparison was done using experimental data where the proposed algorithm had a matched recall of 97% and precision of 85% with respect to the reference algorithm. Conclusion: These results show a substantial performance increase for decomposition of simulated HDsEMG data and serve to validate the proposed approach. This performance increase is an important step towards complete decomposition and extraction of information of motor unit activity. (C) 2022TheAuthor(s). PublishedbyElsevierB.V.
|
|
| 2. |
- Lundsberg, Jonathan, et al.
(författare)
-
Inferring position of motor units from high-density surface EMG
- 2024
-
Ingår i: SCIENTIFIC REPORTS. - 2045-2322. ; 14:1
-
Tidskriftsartikel (refereegranskat)abstract
- The spatial distribution of muscle fibre activity is of interest in guiding therapy and assessing recovery of motor function following injuries of the peripheral or central nervous system. This paper presents a new method for stable estimation of motor unit territory centres from high-density surface electromyography (HDsEMG). This completely automatic process applies principal component compression and a rotatable Gaussian surface fit to motor unit action potential (MUAP) distributions to map the spatial distribution of motor unit activity. Each estimated position corresponds to the signal centre of the motor unit territory. Two subjects were used to test the method on forearm muscles, using two different approaches. With the first dataset, motor units were identified by decomposition of intramuscular EMG and the centre position of each motor unit territory was estimated from synchronized HDsEMG data. These positions were compared to the positions of the intramuscular fine wire electrodes with depth measured using ultrasound. With the second dataset, decomposition and motor unit localization was done directly on HDsEMG data, during specific muscle contractions. From the first dataset, the mean estimated depth of the motor unit centres were 8.7, 11.6, and 9.1 mm, with standard deviations 0.5, 0.1, and 1.3 mm, and the respective depths of the fine wire electrodes were 8.4, 15.8, and 9.1 mm. The second dataset generated distinct spatial distributions of motor unit activity which were used to identify the regions of different muscles of the forearm, in a 3-dimensional and projected 2-dimensional view. In conclusion, a method is presented which estimates motor unit centre positions from HDsEMG. The study demonstrates the shifting spatial distribution of muscle fibre activity between different efforts, which could be used to assess individual muscles on a motor unit level.
|
|
| 3. |
- Rohlén, Robin, et al.
(författare)
-
A fast blind source separation algorithm for decomposing ultrafast ultrasound images into spatiotemporal muscle unit kinematics
- 2024
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- Objective: Ultrasound can detect individual motor unit (MU) activity during voluntary isometric contractions based on their subtle axial displacements. The detection pipeline, currently performed offline, is based on displacement velocity images and identifying the subtle axial displacements. This identification can preferably be made through a blind source separation (BSS) algorithm with the feasibility of translating the pipeline from offline to online. However, the question remains how to reduce the computational time for the BSS algorithm, which includes demixing tissue velocities from many different sources, e.g., the active MU displacements, arterial pulsations, bones, connective tissue, and noise.Approach: This study proposes a fast velocity-based BSS (velBSS) algorithm suitable for online purposes that decomposes velocity images from low-force voluntary isometric contractions into spatiotemporal components associated with single MU activities. The proposed algorithm will be compared against stICA, i.e., the method used in previous papers, for various subjects, ultrasound- and EMG systems, where the latter acts as MU reference recordings.Main results: We found that the spatial and temporal correlation between the MU-associated components from velBSS and stICA was high (0.86 +/- 0.05 and 0.87 +/- 0.06). The spike-triggered averaged twitch responses (using the MU spike trains from EMG) had an extremely high correlation (0.99 +/- 0.01). In addition, the computational time for velBSS was at least 50 times less than for stICA.Significance: The present algorithm (velBSS) outperforms the currently available method (stICA). It provides a promising translation towards an online pipeline and will be important in the continued development of this research field of functional neuromuscular imaging.
|
|
| 4. |
- Rohlén, Robin, et al.
(författare)
-
A fast blind source separation algorithm for decomposing ultrafast ultrasound images into spatiotemporal muscle unit kinematics
- 2023
-
Ingår i: Journal of Neural Engineering. - 1741-2560 .- 1741-2552.
-
Tidskriftsartikel (refereegranskat)abstract
- Objective: Ultrasound can detect individual motor unit (MU) activity during voluntary isometric contractions based on their subtle axial displacements. The detection pipeline, currently performed offline, is based on displacement velocity images and identifying the subtle axial displacements. This identification can preferably be made through a blind source separation (BSS) algorithm with the feasibility of translating the pipeline from offline to online. However, the question remains how to reduce the computational time for the BSS algorithm, which includes demixing tissue velocities from many different sources, e.g., the active MU displacements, arterial pulsations, bones, connective tissue, and noise.Approach: This study proposes a fast velocity-based BSS (velBSS) algorithm suitable for online purposes that decomposes velocity images from low-force voluntary isometric contractions into spatiotemporal components associated with single MU activities. The proposed algorithm will be compared against spatiotemporal independent component analysis (stICA), i.e., the method used in previous papers, for various subjects, ultrasound- and EMG systems, where the latter acts as MU reference recordings.Main results: We found that the computational time for velBSS was at least 20 times less than for stICA, while the twitch responses and spatial maps extracted from stICA and velBSS for the same MU reference were highly correlated (0.96 ± 0.05 and 0.81 ± 0.13).Significance: The present algorithm (velBSS) is computationally much faster than the currently available method (stICA) while maintaining the same performance. It provides a promising translation towards an online pipeline and will be important in the continued development of this research field of functional neuromuscular imaging.
|
|
| 5. |
- Rohlén, Robin, et al.
(författare)
-
Estimating the neural spike train from an unfused tetanic signal of low threshold motor units using convolutive blind source separation
- 2024
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- The central nervous system initiates voluntary force production by providing excitatory inputs to spinal motor neurons, each connected to a set of muscle fibres to form a motor unit. Motor units have been imaged and analysed using ultrafast ultrasound based on the separation of ultrasound images. Although this method has great potential to identify regions and trains of motor unit twitches (unfused tetanus) evoked by the spike trains, it currently has a limited motor unit identification rate. One potential explanation is that the current method neglects the temporal information in the separation process of ultrasound images, and including it could lead to significant improvement. Here, we take the first step by asking if it is possible to estimate the spike train of an unfused tetanic signal from simulated and experimental signals using convolutive blind source separation. This finding will provide a direction for ultrasound-based method improvement. In this study, we found that the estimated spike trains highly agreed with the simulated and reference spike trains. This result implies that the convolutive blind source separation of an unfused tetanic signal can be used to estimate its spike train. Although extending this approach to ultrasound images is promising, the translation remains to be investigated in future studies where spatial information is inevitable as a discriminating factor between different motor units.
|
|
| 6. |
- Rohlén, Robin, et al.
(författare)
-
Estimating the neural spike train from an unfused tetanic signal of low-threshold motor units using convolutive blind source separation
- 2023
-
Ingår i: Biomedical engineering online. - : BioMed Central (BMC). - 1475-925X. ; 22
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Individual motor units have been imaged using ultrafast ultrasound based on separating ultrasound images into motor unit twitches (unfused tetanus) evoked by the motoneuronal spike train. Currently, the spike train is estimated from the unfused tetanic signal using a Haar wavelet method (HWM). Although this ultrasound technique has great potential to provide comprehensive access to the neural drive to muscles for a large population of motor units simultaneously, the method has a limited identification rate of the active motor units. The estimation of spikes partly explains the limitation. Since the HWM may be sensitive to noise and unfused tetanic signals often are noisy, we must consider alternative methods with at least similar performance and robust against noise, among other factors.Results: This study aimed to estimate spike trains from simulated and experimental unfused tetani using a convolutive blind source separation (CBSS) algorithm and compare it against HWM. We evaluated the parameters of CBSS using simulations and compared the performance of CBSS against the HWM using simulated and experimental unfused tetanic signals from voluntary contractions of humans and evoked contraction of rats. We found that CBSS had a higher performance than HWM with respect to the simulated firings than HWM (97.5 ± 2.7 vs 96.9 ± 3.3, p < 0.001). In addition, we found that the estimated spike trains from CBSS and HWM highly agreed with the experimental spike trains (98.0% and 96.4%).Conclusions: This result implies that CBSS can be used to estimate the spike train of an unfused tetanic signal and can be used directly within the current ultrasound-based motor unit identification pipeline. Extending this approach to decomposing ultrasound images into spike trains directly is promising. However, it remains to be investigated in future studies where spatial information is inevitable as a discriminating factor.
|
|
