| 1. |
- Mahaki, Mohammadbagher, et al.
(författare)
-
Comparing objects for human movement simulation regarding its air flow disturbance at local exhaust ventilation
- 2021
-
Ingår i: Energy and Buildings. - : Elsevier. - 0378-7788 .- 1872-6178. ; 247
-
Tidskriftsartikel (refereegranskat)abstract
- The movement of people and other objects indoors may affect airflow patterns and velocities near local exhaust ventilation hoods, and consequently has influence on the hoods’ ability to remove locally emitted contaminants and on ventilation energy requirements. In this study, such disturbance effects have been studied experimentally and numerically, with the movements consisting of a human-sized plate, cylinder and detailed manikin, respectively, making back-and-forth movements near an exhaust hood. In the experimental part of the study, a 3-D sonic anemometer was used to measure air velocity in front of the hood opening. The numerical simulations used dynamic mesh to handle object movements. The numerical results were validated against the experimental ones and yielded supplementary results on the air flow field. The results show that the turbulence produced by the objects movements included marked air velocity peaks – both assisting and impeding the suction flow – in the near field of the exhaust hood. The generated turbulence, and particularly those peaks, proved substantially larger in the case of plate movement than with cylinder and manikin movement. Overall the results indicate that a moving cylinder represents human movement better than a moving plate, and thus that it’s better to use a cylinder in some test standards that now stipulate a plate as moving object. A Percentage of Negative Velocity (PNV) parameter was introduced for assessing the capture efficiency of the local exhaust system. The PNV represents the percentage of time that the air flow is directed away from the exhaust hood in an imagined point of contaminant release. The study includes test cases where the PNV values were significantly above zero, suggesting a strong effect on the capture efficiency of the exhaust hood. Human induced turbulence that cause such reverse air flows and overall impedes hood suction may be counteracted by enhanced exhaust flow rate, but then at higher energy consumption.
|
|
| 2. |
- Mahaki, Mohammadbagher, et al.
(författare)
-
Experimental and numerical simulations of human movement effect on the capture efficiency of a local exhaust ventilation system
- 2022
-
Ingår i: Journal of Building Engineering. - : Elsevier. - 2352-7102. ; 52
-
Tidskriftsartikel (refereegranskat)abstract
- In local exhaust ventilation systems, external turbulence from e.g. human movements can affect the capture efficiency of the system considerably. In this study, experimental and numerical (CFD) approaches were utilized to evaluate the effect of human movement on the capture efficiency of a local exhaust ventilation system with an exterior circular hood. Human movements were simulated by back-and-forth movements of three human-sized moving objects: a flat plate (CFD + experimental), a cylinder (CFD) and a human-shaped manikin (CFD), respectively. The experiments consisted of tracer gas measurements in a full-scale test room. The numerical simulations included dynamic mesh methods to handle object movements. The results showed reasonable agreement between numerical and experimental results regarding the capture efficiency at different movement frequencies and exhaust flow rates, indicating that CFD is a feasible method for investigating complex flows of the studied kind. In comparison with the moving manikin, the moving plate caused significantly lower capture efficiency, whereas the moving cylinder yielded higher values. Overall, the results with the cylinder as moving object proved more similar to those of the manikin than the results with the flat plate. These findings have particular relevance towards existing test standards that stipulate the use of a moving flat plate in similar test situations. Further, some parameter variations verified that local exhaust capture efficiency increases by increasing the exhaust air flow rate and movement time interval, and also by decreasing the distance between contaminant source and exhaust hood opening. Also increasing the distance between the movable object and the contaminant source, as well as decreasing the diameter of the exhaust hood opening increased the capture efficiency.
|
|
| 3. |
- Schweiker, Marcel, et al.
(författare)
-
Evaluating assumptions of scales for subjective assessment of thermal environments – Do laypersons perceive them the way, we researchers believe?
- 2020
-
Ingår i: Energy and Buildings. - : Elsevier BV. - 0378-7788. ; 211
-
Tidskriftsartikel (refereegranskat)abstract
- People's subjective response to any thermal environment is commonly investigated by using rating scales describing the degree of thermal sensation, comfort, and acceptability. Subsequent analyses of results collected in this way rely on the assumption that specific distances between verbal anchors placed on the scale exist and that relationships between verbal anchors from different dimensions that are assessed (e.g. thermal sensation and comfort) do not change. Another inherent assumption is that such scales are independent of the context in which they are used (climate zone, season, etc.). Despite their use worldwide, there is indication that contextual differences influence the way the scales are perceived and therefore question the reliability of the scales’ interpretation. To address this issue, a large international collaborative questionnaire study was conducted in 26 countries, using 21 different languages, which led to a dataset of 8225 questionnaires. Results, analysed by means of robust statistical techniques, revealed that only a subset of the responses are in accordance with the mentioned assumptions. Significant differences appeared between groups of participants in their perception of the scales, both in relation to distances of the anchors and relationships between scales. It was also found that respondents’ interpretations of scales changed with contextual factors, such as climate, season, and language. These findings highlight the need to carefully consider context-dependent factors in interpreting and reporting results from thermal comfort studies or post-occupancy evaluations, as well as to revisit the use of rating scales and the analysis methods used in thermal comfort studies to improve their reliability.
|
|
| 4. |
- Schweiker, Marcel, et al.
(författare)
-
The Scales Project, a cross-national dataset on the interpretation of thermal perception scales
- 2019
-
Ingår i: Scientific data. - : Springer Science and Business Media LLC. - 2052-4463. ; 6:1
-
Tidskriftsartikel (refereegranskat)abstract
- Thermal discomfort is one of the main triggers for occupants' interactions with components of the built environment such as adjustments of thermostats and/or opening windows and strongly related to the energy use in buildings. Understanding causes for thermal (dis-)comfort is crucial for design and operation of any type of building. The assessment of human thermal perception through rating scales, for example in post-occupancy studies, has been applied for several decades; however, long-existing assumptions related to these rating scales had been questioned by several researchers. The aim of this study was to gain deeper knowledge on contextual influences on the interpretation of thermal perception scales and their verbal anchors by survey participants. A questionnaire was designed and consequently applied in 21 language versions. These surveys were conducted in 57 cities in 30 countries resulting in a dataset containing responses from 8225 participants. The database offers potential for further analysis in the areas of building design and operation, psycho-physical relationships between human perception and the built environment, and linguistic analyses.
|
|
