| 1. |
- Aminoroaya, Alireza, et al.
(författare)
-
Facile encapsulation of cyanoacrylate-based bioadhesive by electrospray method and investigation of the process parameters
- 2024
-
Ingår i: Scientific Reports. - : Nature Research. - 2045-2322. ; 14:1
-
Tidskriftsartikel (refereegranskat)abstract
- Polymer microcapsules containing cyanoacrylates have represented a promising option to develop self-healing biomaterials. This study aims to develop an electrospray method for the preparation of capsules using poly(methyl methacrylate) (PMMA) as the encapsulant and ethyl 2-cyanoacrylate (EC) as the encapsulate. It also aims to study the effect of the electrospray process parameters on the size and morphology of the capsules. The capsules were characterized using Fourier-transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), and field-emission scanning electron microscopy (FE-SEM). Moreover, the effects of electrospray process parameters on the size were investigated by Taguchi experimental design. FTIR and TGA approved the presence of both PMMA and EC without further reaction. FE-SEM micrograph demonstrated that an appropriate choice of solvents, utilizing an appropriate PMMA:EC ratio and sufficient PMMA concentration are critical factors to produce capsules dominantly with an intact and spherical morphology. Utilizing various flow rates (0.3–0.5 ml/h) and applied voltage (18–26 kV), capsules were obtained with a 600–1000 nm size range. At constantly applied voltages, the increase in flow rate increased the capsule size up to 40% (ANOVA, p ≤ 0.05), while at constant flow rates, the increase in applied voltage reduced the average capsule size by 3.4–26% (ANOVA, p ≤ 0.05). The results from the Taguchi design represented the significance of solution flow rate, applied voltage, and solution concentration. It was shown that the most effective parameter on the size of capsules is flow rate. This research demonstrated that electrospray can be utilized as a convenient method for the preparation of sub-micron PMMA capsules containing EC. Furthermore, the morphology of the capsules is dominated by solvents, PMMA concentration, and PMMA:EC ratio, while the average size of the capsules can be altered by adjusting the flow rate and applied voltage of the electrospray process.
|
|
| 2. |
- Malekkhouyan, Roya, et al.
(författare)
-
Preparation and Characterization of Electrosprayed Nanocapsules Containing Coconut-Oil-Based Alkyd Resin for the Fabrication of Self-Healing Epoxy Coatings
- 2020
-
Ingår i: Applied Sciences. - : MDPI. - 2076-3417. ; 10:9
-
Tidskriftsartikel (refereegranskat)abstract
- In the present study, the preparation of nanocapsules using the coaxial electrospraying method was investigated. Poly(styrene-co-acrylonitrile) (SAN) was used as a shell material and coconut-oil-based alkyd resin (CAR) as a core. Chemical structure, thermal stability, and morphology of nanocapsules were characterized by Fourier transform infrared (FTIR) spectroscopy, thermal gravimetric analysis (TGA), and field emission scanning electron microscopy (FE-SEM), respectively. In addition, the formation of the core–shell structure was approved by transmission electron microscopy (TEM) and FE-SEM micrographs of the fractured nanocapsules. Furthermore, differential scanning calorimetry tests (DSC) were carried out to investigate the reactivity of released healing agents from the nanocapsules. The prepared nanocapsules were then incorporated into the epoxy resins and applied on the surfaces of the steel panels. The effect of capsule incorporation on the properties of the coating was evaluated. The self-healing performance of the coatings in the salty and acidic media was also assessed. The FTIR results revealed the presence of both shell and core in the prepared nanocapsules and proved that no reaction occurred between them. The morphological studies confirmed that the electrosprayed nanocapsules’ mean diameter was 708 ± 252 nm with an average shell thickness of 82 nm. The TGA test demonstrated the thermal stability of nanocapsules to be up to 270 °C while the DSC results reveal a successful reaction between CAR and epoxy resin, especially in the acidic media. The electrochemical impedance spectroscopy (EIS) test results demonstrate that the best self-healing performance was achieved for the 2 and 1 wt.% nanocapsules incorporation in the NaCl, and HCl solution, respectively.
|
|
| 3. |
- Malekkhouyan, Roya, et al.
(författare)
-
The influence of size and healing content on the performance of extrinsic self‐healing coatings
- 2021
-
Ingår i: Journal of Applied Polymer Science. - : John Wiley & Sons. - 0021-8995 .- 1097-4628. ; 138:10
-
Forskningsöversikt (refereegranskat)abstract
- Among the several approaches for the protection of metallic structures from corrosion, covering with a polymeric coating has attracted more attention due to their convenient application, cost‐effective price, and the relatively benign environmental impact. However, the polymeric coatings are sensitive to mechanical/thermal shocks and aggressive environments, leading to damages in the coatings that affect their barrier performance. Self‐healing polymeric coatings have introduced remarkable development by extending the service life and reducing maintenance costs, leading to a significant boost in the reliability and durability of the conventional polymeric coatings. Among the different strategies to develop self‐polymeric coatings, encapsulating healing agent within micro/nanocapsules, micro/nanofibers, and microvascular systems and incorporating them within the conventional coatings have been widely acknowledged as the most applicable approach. However, several factors, such as the effect of the healing system's size and content, have a significant influence on healing performance. Therefore, this review aims to reveal the effects of healing system size and healing content on the self‐healing performance in polymeric coatings through the analysis of recently published articles.
|
|
