| 1. |
- Colding-Rasmussen, Thomas, et al.
(författare)
-
Biomechanical Variability and Usability of a Novel Customizable Fracture Fixation Technique
- 2023
-
Ingår i: Bioengineering. - : MDPI AG. - 2306-5354. ; 10:10
-
Tidskriftsartikel (refereegranskat)abstract
- A novel in situ customizable osteosynthesis technique, Bonevolent™ AdhFix, demonstrates promising biomechanical properties under the expertise of a single trained operator. This study assesses inter- and intra-surgeon biomechanical variability and usability of the AdhFix osteosynthesis platform. Six surgeons conducted ten osteosyntheses on a synthetic bone fracture model after reviewing an instruction manual and completing one supervised osteosynthesis. Samples underwent 4-point bending tests at a quasi-static loading rate, and the maximum bending moment (BM), bending stiffness (BS), and AdhFix cross-sectional area (CSA: mm²) were evaluated. All constructs exhibited a consistent appearance and were suitable for biomechanical testing. The mean BM was 2.64 ± 0.57 Nm, and the mean BS was 4.35 ± 0.44 Nm/mm. Statistically significant differences were observed among the six surgeons in BM (p < 0.001) and BS (p = 0.004). Throughout ten trials, only one surgeon demonstrated a significant improvement in BM (p < 0.025), and another showed a significant improvement in BS (p < 0.01). A larger CSA corresponded to a statistically significantly higher value for BM (p < 0.001) but not for BS (p = 0.594). In conclusion, this study found consistent biomechanical stability both across and within the surgeons included, suggesting that the AdhFix osteosynthesis platform can be learned and applied with minimal training and, therefore, might be a clinically viable fracture fixation technique. The variability in BM and BS observed is not expected to have a clinical impact, but future clinical studies are warranted.
|
|
| 2. |
- Dukette, Tiffany E, et al.
(författare)
-
Conformation of intramolecularly cross-linked polymer nanoparticles on solid substrates
- 2005
-
Ingår i: Nano letters (Print). - : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 5:9, s. 1704-1709
-
Tidskriftsartikel (refereegranskat)abstract
- The conformation of cross-linked, monomolecular, polystyrene nanoparticles on a solid substrate is considered as a function of cross-linking degree and substrate surface free energy. It is found that an extreme amount of cross-linking is necessary for the ca. 5-10 nm diameter nanoparticles to retain their original spherical shape, regardless of surface free energy. A lesser amount of cross-linking produces a nanoparticle that collapses to a pancake-like conformation on a high-energy substrate yet remains spherical on a low-energy surface. A simple model is developed to reveal the relationship between nanoparticle modulus and surface free energy to define the nanoparticle conformation.
|
|
| 3. |
- Mongkhontreerat, Surinthra, et al.
(författare)
-
UV initiated thiol-ene chemistry : A facile and modular synthetic methodology for the construction of functional 3D networks with tunable properties
- 2013
-
Ingår i: Journal of Materials Chemistry A. - : Royal Society of Chemistry (RSC). - 2050-7488 .- 2050-7496. ; 1:44, s. 13732-13737
-
Tidskriftsartikel (refereegranskat)abstract
- A facile methodology for the fabrication of functional crosslinked three dimensional (3D) networks has herein been explored via the benign and UV initiated thiol-ene coupling (TEC) chemistry. The careful selection of monomers or polymers and their feed ratio resulted in straightforward design of organic, inorganic and hydrogel networks with readily available alkenes or thiol functional groups. All crosslinked networks were fabricated within 1 second of UV exposure at wavelengths of 320-390 nm and generally exhibited excellent gel fractions around 90%. By introducing off-stoichiometric thiol and ene (OSTE) monomer feed ratios the window of mechanical properties could be manipulated. For the organic triazine system, the Young's modulus was altered from 780 MPa at an equimolar monomer ratio to soft 106 kPa for 2.5 equiv. with excess of thiol compared to enes. Postfunctionalizations with hydrophilic polyethylene glycols or acrylic acid and hydrophobic heneicosafluorododecyl acrylate were explored for the manipulation of functional networks. In this case, the rigid networks with excess of thiols were used as model substrates of which the initial contact angle (CA) of 60°was decreased to 43°by the introduction of acrylic acid and increased to 140°by successful attachment of fluorinated molecules. Finally, amalgamating micropatterning strategy with simple postfunctionalizations of hydrophobic groups resulted in superhydrophobic rigid surfaces with a CA of 173°.
|
|
| 4. |
- Schwarzenberg, Peter, et al.
(författare)
-
Biomechanical performance of a novel light-curable bone fixation technique
- 2023
-
Ingår i: Scientific Reports. - : Springer Nature. - 2045-2322. ; 13:1
-
Tidskriftsartikel (refereegranskat)abstract
- Traumatic bone fractures are often debilitating injuries that may require surgical fixation to ensure sufficient healing. Currently, the most frequently used osteosynthesis materials are metal-based; however, in certain cases, such as complex comminuted osteoporotic fractures, they may not provide the best solution due to their rigid and non-customizable nature. In phalanx fractures in particular, metal plates have been shown to induce joint stiffness and soft tissue adhesions. A new osteosynthesis method using a light curable polymer composite has been developed. This method has demonstrated itself to be a versatile solution that can be shaped by surgeons in situ and has been shown to induce no soft tissue adhesions. In this study, the biomechanical performance of AdhFix was compared to conventional metal plates. The osteosyntheses were tested in seven different groups with varying loading modality (bending and torsion), osteotomy gap size, and fixation type and size in a sheep phalanx model. AdhFix demonstrated statistically higher stiffnesses in torsion (64.64 ± 9.27 and 114.08 ± 20.98 Nmm/° vs. 33.88 ± 3.10 Nmm/°) and in reduced fractures in bending (13.70 ± 2.75 Nm/mm vs. 8.69 ± 1.16 Nmm/°), while the metal plates were stiffer in unreduced fractures (7.44 ± 1.75 Nm/mm vs. 2.70 ± 0.72 Nmm/°). The metal plates withstood equivalent or significantly higher torques in torsion (534.28 ± 25.74 Nmm vs. 614.10 ± 118.44 and 414.82 ± 70.98 Nmm) and significantly higher bending moments (19.51 ± 2.24 and 22.72 ± 2.68 Nm vs. 5.38 ± 0.73 and 1.22 ± 0.30 Nm). This study illustrated that the AdhFix platform is a viable, customizable solution that is comparable to the mechanical properties of traditional metal plates within the range of physiological loading values reported in literature.
|
|
| 5. |
- Zorn, Anna-Marie, et al.
(författare)
-
High temperature synthesis of vinyl terminated polymers based on dendronized acrylates : a detailed product analysis study
- 2011
-
Ingår i: POLYMER CHEMISTRY. - : Royal Society of Chemistry (RSC). - 1759-9954 .- 1759-9962. ; 2:5, s. 1163-1173
-
Tidskriftsartikel (refereegranskat)abstract
- The combination of dendrons and high temperature acrylate polymerization represents a viable route to form dendronized macromonomers. Dendronized acrylates based on 2,2-bis(hydroxymethyl) propionic acid (bis-MPA) were synthesized using dendrimer synthesis and click chemistry (copper catalyzed azide alkyne cycloaddition (CuAAC)). The synthesis was carried out up to the 3rd generation and with a carbon spacer length of 6 or 9 between the acrylic function and the dendron core. These dendronized acrylates were subjected to auto-initiated high temperature acrylate polymerization. The polymerization was performed at 140 degrees C in a 5 wt% solution of hexyl acetate with a 2,2'-azobis(isobutyronitrile) (AIBN) concentration of 5 x 10(-3) g mol(-1). The vinyl terminated polymers were in-depth characterized via size exclusion chromatography (SEC) and size exclusion chromatography coupled to electrospray ionization mass spectrometry (SEC-ESI-MS) to assess the generated product spectrum and the efficiency of the process. The achievable number average molecular weight, M-n, was between 1700 and 4400 g mol(-1). The degree of polymerization, DPn, decreases with increasing generations of the dendronized acrylates from 6.3 to 3.4. The purity of vinyl terminated oligomers containing a geminal double bond is up to 83%, with the dendronized acrylates of the 1st generation providing the best result. Moderate deprotection of the acetonide groups occurred spontaneously during the macromonomer formation process and reached its maximum at generation 3.
|
|
| 6. |
- Ahrenstedt, Lage, 1979-
(författare)
-
Drug Eluting Hydrogels : Design, Synthesis and Evaluation
- 2012
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Hydrogels have successfully proved themselves useful for drug delivery applications and several delivery routes have been developed over the years. The particular interest in this work was to design, synthesise and evaluate in situ forming drug eluting hydrogels, which have the potential to ameliorate the healing of cardiovascular diseases.With this aim the anti-inflammatory and immunosuppressant drugs rapamycin (Ra) and dexamethasone (Dex) were made water soluble by conjugation with polyethylene glycol (PEG). Ra was attached pendant from the terminal of PEGs while Dex was incorporated into dendritic structures grown from PEGs. These conjugates were further crosslinked into hydrogels by either conjugate or thiol-ene addition. The gel degradation was tuned to take between 5 and 27 days by using gel building block combinations that induced either 2 or 4 hydrolytically labile bonds per crosslink or by varying the number of crosslinking sites of the building blocks. The use of thiol-ene addition prolonged the degradation time nearly seven folded compared to conjugate addition as a more stable crosslink was formed.Two different formulations for gelling via conjugate addition were used (acrylate-thiol or vinyl sulphone-thiol) to deliver Ra, which was carried by either a 4- or 2-armed PEG. The elution kinetic for the respective gel formulation was of zero order during 15 and 19 days of gel degradation. In addition, Ra was PEGylated via esters, with a distance of either one or two carbons to a nearby thio-ether functionality. The difference in ester conjugation resulted in a slight but significant change in drug-PEG conjugate stability, which was mirrored by the increased time to reach the half amount of total drug elution; from 9.3 to 10.2 days and from 5.1 to 9.7 days for the two gel formulations, respectively. Dexamethasone was incorporated via an ester into dendrons of first and second generation pending from 2- and 4-armed PEGs at loadings of 2, 4 or 6 Dex molecules per carrier molecule. The resulting elution kinetic was of zero order during degradation periods of 5-27 days. Released Dex still possessed biological activity as determined by an in vitro cell assay.The novelties in this thesis are: (A) slow release of rapamycin obtained by covalent incorporation into hydrogels, (B) the use of unique PEG-based dendrimers to incorporate dexamethasone into a hydrogel and (C) zero order sustained release of dexamethasone at physiological pH.
|
|
| 7. |
- Ahrenstedt, Lage, et al.
(författare)
-
Sustained zero-order release of dexamethasone after incorporation into crosslinked PEG-dendrons using click reactions
- 2024
-
Ingår i: Journal of Drug Delivery Science and Technology. - : Elsevier BV. - 1773-2247. ; 95
-
Tidskriftsartikel (refereegranskat)abstract
- Hydrogel-based localised drug delivery minimises systemic side effects and a linear release profile ensuring a sustained drug release over time, crucial for long-term therapy. The current paper describes the use of the Copper(I)-catalyzed Azide-Alkyne Cycloaddition (CuAAc) to append azidified Dexamethasone (Dex) onto dendrons of first- and second-generation PEGs. Crosslinking with thiolated PEGs using either thiol-acrylate or nucleophilic addition reactions yielded gels containing β-thio-ether ester groups that imparted enhanced hydrolytic susceptibility. In vitro gel degradation was followed gravimetrically and expressed as swelling ratios. Thiol-acrylate crosslinked hydrogels exhibited zero-order Dex release kinetics over 11, 27, and 16 days (G1, G1-star, and G2). Crosslinking the G1-gels by nucleophilic addition also resulted in linear release and the end point was reached in 5 days. Hydrolysis was accounted as the main release mechanism for covalently bound Dex, while physically incorporated Dex showed undefined rapid burst or first-order release, with most of the drug released in the initial 1–3 days. Eluates from covalently bound Dex maintained high activity, whereas Trap-Dex gels lost activity over time, as detected by the upregulation of luciferase expression from a transformed cell line. This novel chemistry combination offers precise drug release control applicable beyond Dex to drugs with suitable nucleophilic groups.
|
|
| 8. |
- Akpe, Victor
(författare)
-
Photophysical and Chemical Approaches to Cellular Biophysics
- 2008
-
Licentiatavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The central theme in this thesis is reversibility. Two main attempts has been made to approach reversibility in cellular systems from both chemical and physical points of view. Reversibility of immunolabeling of proteins on the cell surface has been adressed by development of new fluorescent substances optimized for CALI (Chromophore-Assisted Laser Inactivation of protein). Aluminum phthalocyanine (AlPc) is here identified to be a good candidate for a new generation of fluorophores for efficient hydroxyl radical generation. It is shown that cells can be reversibly labeled with antibody-AlPc conjugates. In experiments on living cells the AlPcs were not only active as classic fluorophores but also as photocatalytic substances with destaining properties. Reversibility of cell immobilization is also reported, where cells cultured in microstructures were immobilized and 3D supported using hydrogels. Hydrogel formulation and application was optimized to achieve a system where both viability and ease of use was satisfied. Gel reversibility was actualized with pH and enzyme treatment. The developped method offers the possibility of stop flow culturing cells in controlled and reusable 3D environments.
|
|
| 9. |
- Andrén, Oliver C. J., et al.
(författare)
-
Antibiotic-Free Cationic Dendritic Hydrogels as Surgical-Site-Infection-Inhibiting Coatings
- 2019
-
Ingår i: Advanced Healthcare Materials. - : Wiley. - 2192-2640 .- 2192-2659.
-
Tidskriftsartikel (refereegranskat)abstract
- A non-toxic hydrolytically fast-degradable antibacterial hydrogel is herein presented to preemptively treat surgical site infections during the first crucial 24 h period without relying on conventional antibiotics. The approach capitalizes on a two-component system that form antibacterial hydrogels within 1 min and consist of i) an amine functional linear-dendritic hybrid based on linear poly(ethylene glycol) and dendritic 2,2-bis(hydroxymethyl)propionic acid, and ii) a di-N-hydroxysuccinimide functional poly(ethylene glycol) cross-linker. Broad spectrum antibacterial effect is achieved by multivalent representation of catatonically charged β-alanine on the dendritic periphery of the linear dendritic component. The hydrogels can be applied readily in an in vivo setting using a two-component syringe delivery system and the mechanical properties can accurately be tuned in the range equivalent to fat tissue and cartilage (G' = 0.5-8 kPa). The antibacterial effect is demonstrated both in vitro toward a range of relevant bacterial strains and in an in vivo mouse model of surgical site infection.
|
|
| 10. |
- Andrén, Oliver C. J., et al.
(författare)
-
Heterogeneous Rupturing Dendrimers
- 2017
-
Ingår i: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 0002-7863 .- 1520-5126.
-
Tidskriftsartikel (refereegranskat)abstract
- Utilizing macromolecular scaffolds as templates for the production of small molecules that are distinctively different from the original monomer feedstock has many potential applications. Herein, as a proof-of-concept, a family of dendrimers displaying internally queued disulfide bridges were synthesized and exploited as flawless macromolecular templates that selectively rupture into a set of monomeric mercaptans. Disassembly was accomplished in a reducing environment, using DTT as an external stimulus, and the thiol constituents were successfully isolated. Their composition was dictated by three dendritic regions, i.e., (i) the symmetrical trithiol of the core (C3), (ii) the interior-asymmetric trithiols (CD2), and (iii) the periphery-asymmetric monothiols (DB2), in which B functionality is of an orthogonal nature. Taking into account the steady state between disulfides and thiols in all living cells, the collapse of the dendrimers to a multitude of smaller thiols was intracellularly assessed as a means to disrupt the balance of reactive oxygen species (ROS) often elevated in cancer cells. Indeed, the fragmentation induced a significant increase of ROS in human lung carcinoma A549 cells. These findings can potentially alter the perception of dendrimers being limited to carriers to being prodrugs for intracellular delivery of ROS with the potential to fight cancer.
|
|
