| 1. |
- Murari, A., et al.
(författare)
-
A control oriented strategy of disruption prediction to avoid the configuration collapse of tokamak reactors
- 2024
-
Ingår i: Nature Communications. - 2041-1723 .- 2041-1723. ; 15:1
-
Tidskriftsartikel (refereegranskat)abstract
- The objective of thermonuclear fusion consists of producing electricity from the coalescence of light nuclei in high temperature plasmas. The most promising route to fusion envisages the confinement of such plasmas with magnetic fields, whose most studied configuration is the tokamak. Disruptions are catastrophic collapses affecting all tokamak devices and one of the main potential showstoppers on the route to a commercial reactor. In this work we report how, deploying innovative analysis methods on thousands of JET experiments covering the isotopic compositions from hydrogen to full tritium and including the major D-T campaign, the nature of the various forms of collapse is investigated in all phases of the discharges. An original approach to proximity detection has been developed, which allows determining both the probability of and the time interval remaining before an incoming disruption, with adaptive, from scratch, real time compatible techniques. The results indicate that physics based prediction and control tools can be developed, to deploy realistic strategies of disruption avoidance and prevention, meeting the requirements of the next generation of devices.
|
|
| 2. |
|
|
| 3. |
|
|
| 4. |
|
|
| 5. |
|
|
| 6. |
- Lee, S. E., et al.
(författare)
-
Global distribution of tritium in JET with the ITER-like wall
- 2021
-
Ingår i: Nuclear Materials and Energy. - : Elsevier BV. - 2352-1791. ; 26
-
Tidskriftsartikel (refereegranskat)abstract
- Nondestructive analysis of tritium (T) distribution was performed by means of imaging plate technique on specimens cut from the Be limiters, W-coated carbon tiles and bulk W lamellae retrieved from the JET tokamak after the first and third experimental campaigns with the ITER-like wall. Afterwards, analyses were continued using X-ray photoelectron spectroscopy, microscopy techniques and thermal desorption spectroscopy. Co-deposits formed on the W-coated tiles in the 1st campaign showed large T retention because of high carbon content reaching up to 50 atomic %, while the carbon fraction in co-deposits after the 3rd campaign was distinctly lower. The T retention of the plasma-facing surface of the bulk W tile was smaller than that of the W-coated tiles by a factor of 20, while deposition of small amount of T was found at the side surfaces facing to the gaps in a lamella structure. The correlation of T distributions with surface morphology and the discharge conditions is discussed.
|
|
| 7. |
- Lee, S. E., et al.
(författare)
-
Tritium distribution analysis of Be limiter tiles from JET-ITER like wall campaigns using imaging plate technique and β-ray induced X-ray spectrometry
- 2020
-
Ingår i: Fusion engineering and design. - : Elsevier BV. - 0920-3796 .- 1873-7196. ; 160
-
Tidskriftsartikel (refereegranskat)abstract
- Tritium (T) distribution on the plasma-facing surfaces (PFSs) and inside castellation of Be limiter tiles from the JET tokamak with the ITER-like wall (ILW) was analyzed using imaging plate (IP) technique and β-ray induced X-ray spectrometry (BIXS). Regarding to PFSs, the outer poloidal limiter (OPL) showed significantly higher T concentrations than the inner wall guard limiter (IWGL) and upper dump plate (DP). The concentration of T on OPL was high at the central part. However, deuterium (D) and metallic impurities showed maximum concentration at the edges. This difference in distributions indicated different deposition and retention mechanisms between T and D. In contrast, deposition profiles of T concentrations on the castellated surfaces extended up to ∼ 5 mm into the gap, i.e. were similar to those of D and metallic impurities found by ion beam analysis.
|
|
| 8. |
- Tokitani, M., et al.
(författare)
-
Surface morphology of the bulk tungsten divertor tiles from JET ITER-like wall
- 2020
-
Ingår i: Physica Scripta. - : IOP PUBLISHING LTD. - 0031-8949 .- 1402-4896. ; T171:1
-
Tidskriftsartikel (refereegranskat)abstract
- Surface characterization of bulk tungsten tiles (W lamellae) used during the first campaign of JET with the ITER-Like Wall (JET-ILW) was performed by means of microscopy and tritium imaging techniques. This is the first report regarding very detailed structural studies of W lamellae from the JET-ILW divertor. A special feature of the W lamellae installed in JET is the intrinsic network of micro-cracks detected on surfaces of the as-manufactured material. Analyses of different W lamellae samples on the plasma-facing surface reveal two types of surface structures caused by plasma impact: areas with strong erosion and regions of mild plasma interaction. In regions of strong erosion, a thin modified layer (thickness of similar to 20 nm) with a high density of defects including bubble-like structures has been formed. In addition, features indicating melting along edges of micro-cracks with the micro-scale plastic deformation have been identified.
|
|
| 9. |
- Ashikawa, N., et al.
(författare)
-
Determination of retained tritium from ILW dust particles in JET
- 2020
-
Ingår i: Nuclear Materials and Energy. - : Elsevier BV. - 2352-1791. ; 22
-
Tidskriftsartikel (refereegranskat)abstract
- Quantitative tritium inventory in dust particles from campaigns in the JET tokamak with the carbon wall (2007–2009) and the ITER-like wall (ILW 2011–2012) were determined by the liquid scintillation counter and the full combustion method. A feature of this full combustion method is that dust particles were covered by a tin (Sn) which reached 2100 K during combustion under oxygen flow. The specific tritium inventory for samples from JET with carbon and with metal walls was measured and found to be similar. However, the total tritium inventory in dust particles from the ILW experiment was significantly smaller in comparison to the carbon wall due to the lower amount of dust particles generated in the presence of metal walls.
|
|
| 10. |
- Lee, S., et al.
(författare)
-
Tritium distributions in castellated structures of Be limiter tiles from JET-ITER-like wall experiments
- 2023
-
Ingår i: Nuclear Fusion. - : IOP Publishing Ltd. - 0029-5515 .- 1741-4326. ; 63:4
-
Tidskriftsartikel (refereegranskat)abstract
- Tritium retention in the castellated structure of beryllium limiters used in JET with the ITER-like wall (ILW) during the first (ILW1), third (ILW3) and all three (ILW1-3) campaigns were examined and evaluated. Tritium was deposited on the surfaces inside the castellation grooves together with deuterium, beryllium, oxygen, carbon and small amounts of metallic impurities such as nickel, copper and tungsten. The tritium content after the ILW1 campaign was greater than after the ILW3 campaign. This is attributed to the steadily decreasing amount of carbon impurities in JET from campaign to campaign. The majority of tritium was retained in shallow regions in the grooves, up to 2 mm from the entrance to the gap. It was comparable on all sides of the castellation, i.e. no difference has been detected between the toroidal and poloidal gaps. Secondly, the tritium retention in the gaps was similar on all specimens independent of their position in the tokamak, while the retention on the plasma-facing surfaces clearly depended on the tile position. The tritium deposition patterns in the castellation were also compared with the deuterium distribution determined in earlier studies.
|
|
