| 1. |
- Amon, Francine, et al.
(författare)
-
Fire Impact Tool- Measuring the impact of fire suppression operations on the environment
- 2021
-
Ingår i: Fire safety journal. - : Elsevier Ltd. - 0379-7112 .- 1873-7226. ; 120
-
Tidskriftsartikel (refereegranskat)abstract
- In Sweden the responsibility for environmental damage when emergency responders are called to an incident is increasingly focussing on the responders. The problem is that most incident response personnel do not have the training and expertise to assess the environmental consequences of their suppression operations. The Fire Impact Tool was developed for training responders about how fire effluents and suppression media affect air, surface/groundwater and soil. The tool has three interdependent parts: fire models (for vehicles and enclosures), an environmental risk assessment (ERA) model for local impacts, and a life cycle assessment (LCA) model for global impacts. Users can create two scenarios that are compared with a reference case in which responders arrive at the incident and prevent the fire from spreading beyond the vehicle or enclosure but do not suppress the fire. The Fire Impact Tool is not intended for use during an actual fire incident. This work does not answer every question for every possible fire scenario, but it does provide a framework for deeper, broader, more comprehensive training and pre-planning. This is a necessary step toward a future in which responders are prepared to make informed decisions about firefighting strategies and tactics that include environmental consequences.
|
|
| 2. |
|
|
| 3. |
- Gehandler, Jonatan, 1982-, et al.
(författare)
-
Interaktiv Miljöbedömning vid Insats: IMI-verktyget
- 2021
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- Programmet ”IMI-verktyget” (se länk till höger) är utvecklat för att ge räddningstjänst, studenter och forskare ett verktyg för att öka kunskapen angående konsekvenserna av taktiska val vid respons till en brand, exemplifierad av några fordons- och rumsbränder.I rapporten till höger (”fulltext”) beskriver hur verktyget fungerar och innehåller också exempel på datorlabbar som skulle kunna genomföras inom en brandingenjörsutbildning eller räddningsledarutbildning.
|
|
| 4. |
- Mcnamee, Robert, et al.
(författare)
-
Environmental Benefits of Rapid Fire Detection
- 2023
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- A study has been undertaken to investigate the environmental implication of early detection of a fire for the environmental impact of the fire when taking into account the global impact of the intervention itself and the need to replace building and contents as a function of the size and duration of the fire. The various scenarios investigated show that the greatest benefit is gained if a fire is detected early and can be extinguished while small without the intervention of the fire service. Significant savings can also be made if a sprinkler can keep the fire small while the fire service is on their way to the fire so that they meet a small fire which they can rapidly extinguish once they are on the scene. The methodology is based on an assumption of a single enclosure size, a generic fire load, detection and response. Future work should investigate different building typologies, fire loads and response types.
|
|
| 5. |
- Arinaitwe, Evalyne, et al.
(författare)
-
Is the fire performance of phase change materials a significant barrier to implementation in building applications?
- 2024
-
Ingår i: Journal of Energy Storage. - : Elsevier. - 2352-152X .- 2352-1538. ; 94
-
Tidskriftsartikel (refereegranskat)abstract
- This paper examines the reaction-to-fire behaviour of building materials containing phase change materials by predicting their fire classification according to the European reaction-to-fire classification system (Euroclasses). While various building materials containing PCMs exist today, their application in buildings has been somewhat limited due to the fire behaviour of these building materials. Existing research has focused on small scale testing which does not allow determination of the Euroclass of the material. In this application, large scale performance is predicted based on previously published small scale data to provide some valuable insights into the expected fire performance of these materials. As a starting point, a systematic literature review on phase change materials (PCM) and fire behaviour was conducted, with the purpose of identifying all existing literature concerning experimental investigation of the fire behaviour of building materials containing PCMs. In total, 816 articles were selected from the literature search. After screening of these papers, 51 articles were fully reviewed and included in the next step of the study. In the next step, the reaction-to-fire behaviour of the building materials with PCMs that were identified from the literature was predicted using the ConeTools simulation program. The input data required for ConeTools was obtained from the identified literature. Initially, 27 of the 51 studies used cone calorimetry as a fire testing method and could therefore be considered for the Euroclass assessment. However, of the 27 studies, only 17 studies provided information on both the heat release rates (HRR) and time to ignition (TTI) and were selected for use in the ConeTools program. The ConeTools program predicted Euroclasses for all the building materials containing PCMs from the selected 17 studies. The predicted Euroclasses for most materials was low (i.e. fire classes ‘D' or ‘E or worse') which confirms that materials containing PCMs generally have a low react-to-fire behaviour even with addition of flame retardants (FR). Our findings indicate that the fire behaviour, typically Euroclass ‘D' or ‘E or worse', of the building materials containing PCMs is indeed a barrier to their implementation in the building applications where Euroclass C or higher is required, e.g. in evacuation pathways or certain public spaces. The predictions of the Euroclasses based on ConeTools need to be confirmed using Single Burning Item tests (EN 13823) and/or Room Corner tests (ISO 9705) in the future, to enable a better understanding of fire behaviour of these building materials.
|
|
| 6. |
- Beyler, C., et al.
(författare)
-
Oxygen consumption calorimetry, William Parker: 2016 DiNenno Prize
- 2017
-
Ingår i: Fire Science Reviews. - : Springer Science and Business Media LLC. - 2193-0414. ; 6:1
-
Tidskriftsartikel (refereegranskat)abstract
- The 2016 DiNenno Prize recognizes oxygen consumption calorimetry as a significant technical achievement that has had a major impact on public safety. Oxygen consumption calorimetry has made the measurement of heat release rate of a fire a routine part of fire testing for both research and for regulatory compliance. Heat release rate is a primary metric of fire size which is foundational in modern fire protection engineering. The 2016 Philip J. DiNenno Prize is awarded to Dr. William Parker, with ample commendation to his deceased collaborator, Dr. Clayton Huggett. Others who made contributions to the early development and application of oxygen consumption calorimetry include Peter Hinkley, William Christian, Thomas Waterman, Darryl Sensenig, Ralph Krause, Richard Gann, Vyto Babrauskas, Gunnar Heskestad, Norm Alvares, Donald Beason, and Brady Williamson. This review presents an overview of the background to the technological development and its impact on public safety
|
|
| 7. |
- Beyler, Craig, et al.
(författare)
-
The affordable home smoke alarm, Lyman Blackwell- 2015 DiNenno Prize winner
- 2017
-
Ingår i: Fire Science Reviews. - : Springer Science and Business Media LLC. - 2193-0414. ; 6:2
-
Tidskriftsartikel (refereegranskat)abstract
- The 2015 Philip J. DiNenno Prize was awarded for the affordable home smoke alarm. This technology developed and implemented by Lyman L. Blackwell and Duane D. Pearsall paved the way for installation of smoke alarms in all residences. This has had a major impact on the reduction of deaths due to fire. The 2015 Philip J. DiNenno Prize was awarded to Lyman L. Blackwell, with ample commendation to his deceased compatriot, Duane D. Pearsall. Contributions were made by Paul Staby, B. K. Sweeney, Rexford Wilson, Myrle Wise, Gus Degenkolb, Eugene Cray, Jack Rhodes, Dick Bright, and Dick Bukowski. This review presents an overview of the background to the technological development and its impact on public safety.
|
|
| 8. |
- Blomqvist, Per, et al.
(författare)
-
Characterisation of fire generated particles : BRANDFORSK project 700-061, FireTechnology, SP Report 2010:01
- 2010
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- Characterisation of fire generated particlesThe present project has examined the question of distribution patterns of important chemical compounds between gas phase and particle phase. It has also, in some cases, addressed the question of the distribution of individual particle-associated species between the different size-ranges of particles produced in a fire. The chemical compounds studied were hydrogen chloride (HCl), polycyclic aromatic hydrocarbons (PAHs), and isocyanates.The steady-state tube furnace, ISO/TS 19700, was chosen as the physical fire model in order to study the production of particles from different types of fire exposure. Three different fire types were investigated: oxidative pyrolysis, well-ventilated flaming fires and vitiated post flashover. Two materials were chosen for investigation, PVC-carpet and wood board, based on their prevalence fire exposure scenarios and their chemical composition. The particle production from the two materials investigated varied both concerning the amounts produced and the particle size distributions. The production of particles on a mass basis was generally significantly lower from the wood board compared with the PVC-carpet. The tests with the PVC-carpet showed that relatively large particles are produced from all combustion conditions examined. The tests made with the wood board show preferably predisposition towards the production of small-sized particles during flaming combustion.The analysis of PAHs in the tests with the PVC-carpet showed that volatile PAHs were dominate during all types of combustion. However, when the toxicity of the individual species was taken into account, the relative importance between volatile and particle associated PAHs changed. From the tests with the wood board material (OSB) it was noted that the highest yields of total PAHs were found from under ventilated conditions, and the volatile part of the total PAH dominated for this material as well. The yields found from the well-ventilated tests were very low. Toxicity weighted data showed that the particle associated part dominated the toxicity both for under ventilated and well-ventilated conditions.A study made of the presence of chlorine on particles showed that it is clear that the major part of the HCl produced during combustion of the PVC-carpet is present in the gas phase. Chlorine was found associated with particulates but these results were, however, inconclusive due to the difficulty in determining the source of the chlorine found in the soot fractions studied.The low polyurethane (PUR) content and the substantial degradation of the PUR in the tests resulted in no or very small amounts of quantifiable isocyanate dimers (i.e. high molecular species). Monoisocyanates such as ICA and MIC dominated in the emitted degradation products. These kinds of monoisocyanates are volatile compounds and almost exclusively present in the gas phase.
|
|
| 9. |
- Blomqvist, Per, et al.
(författare)
-
Detailed study of distribution patterns of polycyclic aromatic hydrocarbons and isocyanates under different fire conditions
- 2014
-
Ingår i: Fire and Materials. - : Wiley. - 0308-0501 .- 1099-1018. ; 38:1, s. 125-144
-
Tidskriftsartikel (refereegranskat)abstract
- This study has examined the distribution patterns between gas phase and particle phase of some chemical compounds produced in fires. It has also addressed the question of the distribution of individual particle-associated species between the different size-ranges of particles. The chemical compounds studied and discussed in this paper are polycyclic aromatic hydrocarbons (PAHs), and isocyanates. The steady-state tube furnace, ISO/TS 19700, was chosen as the physical fire model in order to study the production of particles from different types of fire exposure, that is, oxidative pyrolysis, well-ventilated flaming fires and under-ventilated flaming post-flashover fires. Two materials were chosen for investigation, a polyvinyl chloride (PVC) carpet and a wood board. The particle production from the two materials investigated varied concerning both the amounts produced and the particle size distributions. The analysis of PAHs showed that volatile PAHs were generally dominant. However, when the toxicity of the individual species was taken into account, the relative importance between volatile and particle-associated PAHs shifted the dominance to particle-bound PAH for both materials. The substantial degradation in the tests of the low polyurethane content of the PVC carpet, and the (4,4′-methylenediphenyl diisocyanate)-based binder in the wood board resulted in no or very small amount of quantifiable diisocyanates.
|
|
| 10. |
- Blomqvist, Per, et al.
(författare)
-
Polycyclic Aromatic Hydrocarbons (PAHs) Quantified in Large-Scale Fire Experiments
- 2012
-
Ingår i: Fire technology. - : Springer Science and Business Media LLC. - 0015-2684 .- 1572-8099. ; 48:2, s. 513-528
-
Tidskriftsartikel (refereegranskat)abstract
- A number of large-scale fire experiments with detailed quantitative analysisof polycyclic aromatic hydrocarbon (PAH) including PAH congener distributionhave been conducted by SP. This data is reviewed here and is further assessed withregard to toxicity applying a Toxic Equivalency Factor (TEF) model for estimationof cancer potential. The PAH yield data from the large-scale fire experiments is alsocompared to emission factors from other combustion sources. The study shows thatfull-scale fire experiments with different products exhibit a large variation in totalPAH yields. Fires with products containing flame retardants were shown to producethe highest yields and generally a more toxic mixture of PAHs than fires with nonflameretarded products. The distribution of individual PAH congeners is generallyquantitatively dominated by low molecular weight PAHs, whereas a small number ofmedium to high molecular weight PAHs are most important in determining the toxicityof the PAH mixture. The large-scale fire experiments indicate that fires normallyproduce orders of magnitudes higher yields compared to, e.g. modern residentialcombustion devices. The relative distribution of individual PAHs, which determinesthe toxicity of the PAH mix, is similar for the fires and open burning data studied, inthat benzo(a)pyrene and dibenz(a,h)anthracene dominate the toxicity of the mix as awhole.
|
|
